Drill point geometry is a most significant element for drilling performance and micro-hole quality. Non-coaxial helical drill point is characterized by a continuous helical flank surface, and its special geometry contributes to a better grinding efficiency and a superior drilling performance. The position equation of generating line of helical surface is obtained, and the mathematical model of contact line between helical drill flank and wheel is proposed. According to the motion of 6-axis CNC tool grinder, a 5-axis coordinated grinding method of helical drill flank is presented. Based on the relative motion of drill flute and wheel, a CNC grinding process of micro-drill flute is proposed. Then this grinding method is validated by fabricating the helical micro-drill. For the planar, conical and helical micro-drills with the same geometry parameters, the drilling experiments on austenitic stainless steel are conducted, and the drilling force and tool wear are measured and analyzed. The results show that the thrust force and flank wear of helical, conical drill point are smaller than that of planar drill point, and the chisel edge wear of helical drill point is smaller than that of planar, conical drill point. It is confirmed that the proposed grinding method is effective to fabricate the helical micro-drill with good drilling performance.
ZHANG Suyan
,
LIANG Zhiqiang
,
WANG Xibin
,
ZHOU Tianfeng
,
JIAO Li
,
LIU Zhibing
,
YAN Pei
. A 5-axis Coordinated Grinding Method of Non-coaxial Helical Flank Micro-drill and Its Drilling Performance Research[J]. Journal of Mechanical Engineering, 2018
, 54(19)
: 204
-211
.
DOI: 10.3901/JME.2018.19.204
[1] GALLOWAY D F. Some experiments on the influence of various factors on drill performance[J]. Transactions of the ASME,1957,79(2):191-231.
[2] 杨兆军,杨兆华. 微小孔钻削加工的难点及其技术对策[J]. 机械工程师,1997,(5):15-16. YANG Zhaojun,YANG Zhaohua. Difficulty of micro-hole drilling and its technical countermeasures[J]. Mechanical Engineer,1997,(5):15-16.
[3] FUGELSO M A. Conical flank twist drill point[J]. International Journal of Machine Tool and Manufacture,1990,30(2):291-295.
[4] FUGELSO M A. Cylindrical flank twist drill points[J]. Journal of Manufacturing Science and Engineering,1983,105(3):183-186.
[5] TSAI W D,WU S M. Computer analysis of drill point geometry[J]. International Journal of Machine Tools and Manufacture,1979,19(2):95-108.
[6] LIN C,KANG S K,EHMANN K F. Planar micro-drill point design and grinding methods[J]. Transactions of the North American Manufacturing Research Institution of SME,1992,20:173-179.
[7] CHYAN H C,EHMANN K F. Development of curved helical micro-drill point technology for micro-hole drilling[J]. Mechatronics,1998,8(4):337-358.
[8] LIN C,KANG S K,EHMANN K F. Helical micro-drill point design and grinding[J]. Journal of Engineering for Industry,1995,117(3):277-287.
[9] 周志雄,袁建军,林丞. 非共轴螺旋面微孔钻钻尖的数学模型[J]. 湖南大学学报,1999,26(3):30-33. ZHOU Zhixiong,YUAN Janjun,LIN Cheng. Mathematical model for non-coaxial helical micro-drill point[J]. Journal of Hunan University,1999,26(3):30-33.
[10] KANG S K. Micro-drill geometry and grinding[D]. Evanston:Northwestern University,1993.
[11] GANGLANI S,EHMANN K F. Design and implementation of a helical drill point grinder[J]. Trans NAMRI/SME,2001,XX|X:1-8.
[12] HSIEH J F. Mathematical model for helical drill point[J]. International Journal of Machine Tools and Manufacture,2005,45:967-977.
[13] HSIEH J F. NC data generation for 6-axis machine tools to produce a helical drill[J]. The International Journal of Advanced Manufacturing Technology,2008,36:535-546.
[14] 周志雄,罗霞玉,杨军,等. 非共轴螺旋面钻尖角度的求解[J]. 湖南大学学报,2001,28(3):32-36. ZHOU Zhixiong,LUO Xiayu,YANG Jun,et al. Solution to angles of non-coaxial helical drill point[J]. Journal of Hunan University,2001,28(3):32-36.
[15] YAN L,JIANG F. A practical optimization design of helical geometry drill point and its grinding process[J]. International Journal of Advanced Manufacturing Technology,2013,64(9-12):1387-1394.
[16] PAUL A,KAPOOR S G,de VOR D E. Chisel edge and cutting lip shape optimization for improved twist drill point design[J]. International Journal of Machine Tools and Manufacture,2005,45(4-5):421-431.
[17] 周志雄. 一种新型钻头及其刃磨技术的研究[D]. 长沙:湖南大学,2000. ZHOU Zhixiong. A kind of new micro-drill and grinding technology[D]. Changsha:Hunan University,2000.
