Impact Reduction Method for Electric Vehicle Dual-mode Coupling Drive System with Modes Shift

  • ZHANG Lipeng ,
  • GU Dingjie ,
  • QI Bingnan ,
  • DONG Chuangchuang
Expand
  • 1. School of Vehicle and Energy, Yanshan University, Qinhuangdao 066004;
    2. State Key Laboratory of Automotive Safety and Energy, Tsinghua University, Beijing 100084;
    3. School of Electrical Engineering, Yanshan University, Qinhuangdao 066004

Received date: 2017-05-10

  Revised date: 2017-10-06

  Online published: 2018-04-20

Abstract

The dual-mode coupling drive system integrates the functions of the centralized drive system and the distributed drive system, which can greatly improve the electric vehicle dynamics performance, but the vehicle ride comfort is decreased due to the drive modes switch. In order to solve the above problem, the modes shift impact reduction method based on an electromechanical coupling control is proposed and verified. Firstly, the transmission system model is built based on the unique configuration of the dual-mode coupling drive system, and the dynamics mechanism of reduction modes shift impact by the addition of torsional dampers is revealed. Then, based on the optimization result of the system parameters, the angular displacement curve of the actuator drive motor is obtained by considering the limit of time and impact of the modes shift. At last, based on a predictive function controller that is designed for the modes shift, the angular displacement tracking control of the actuator motor is achieved and the modes shift is smoothly completed. The research shows that, on the premise of ensure the modes shift time, the impact of the dual-mode coupling drive system can be effectively reduced by the electromechanical coupling control with combining the torsional damper with the predictive functional controller, and the vehicle ride comfort indicators are well met.

Cite this article

ZHANG Lipeng , GU Dingjie , QI Bingnan , DONG Chuangchuang . Impact Reduction Method for Electric Vehicle Dual-mode Coupling Drive System with Modes Shift[J]. Journal of Mechanical Engineering, 2018 , 54(8) : 165 -176 . DOI: 10.3901/JME.2018.08.165

References

[1] TSENG C Y, YU C H. Advanced shifting control of synchronizer mechanisms for clutchless automatic manual transmission in an electric vehicle[J]. Mechanism & Machine Theory, 2015, 84:37-56.
[2] 余卓平, 冯源, 熊璐. 分布式驱动电动汽车动力学控制发展现状综述[J]. 机械工程学报, 2013, 49(8):105-114. YU Zhuoping, FENG Yuan, XIONG Lu. Review on vehicle dynamics control of distributed drive electric vehicle[J]. Journal of Mechanical Engineering, 2013, 49(8):105-114.
[3] 张利鹏, 李亮, 祁炳楠. 轮毂电机驱动电动汽车侧倾稳定性解耦控制[J]. 机械工程学报, 2017, 53(16):94-104. ZHANG Lipeng, LI Liang, QI Bingnan. Decoupled roll stability control of in-wheel motor drive electric vehicle[J]. Journal of Mechanical Engineering, 2017, 53(16):94-104.
[4] DADASHNIALEHI A, BAB-HADIASHAR A, CAO Z, et al. Intelligent sensorless ABS for in-wheel electric vehicles[J]. IEEE Transactions on Industrial Electronics, 2014, 61(4):1957-1969.
[5] 林程, 徐志峰, 王文伟, 等. 基于直接滑动率分配的横摆稳定性控制策略研究[J]. 机械工程学报, 2015, 51(16):41-49. LIN Cheng, XU Zhifeng, WANG Wenwei, et al. Research on yaw stability control based on direct slip ratio distribution[J]. Journal of Mechanical Engineering, 2015. 51(16):41-49.
[6] YU Zhuoping, LENG Bo, XIONG Lu, et al. Direct Yaw Moment control for distributed drive electric vehicle handling performance improvement[J]. Chinese Journal of Mechanical Engineering, 2016, 29(3):486-497.
[7] 张利鹏,李亮,祁炳楠,等. 分布式驱动电动汽车转矩自适应驱动防滑控制[J]. 机械工程学报, 2013, 49(14):106-113. ZHANG Lipeng, LI, Liang, QI Bingnan, et al. Torque adaptive traction control for distributed drive electric vehicle[J]. Journal of Mechanical Engineering, 2013, 49(14):106-113.
[8] MUTOH N, NAKANO Y. Dynamics of front-and-rearwheel-independent-drive-type electric vehicles at the time of failure[J]. IEEE Transactions on Industrial Electronics, 2012, 59(3):1488-1499
[9] 张利鹏, 李亮, 祁炳楠, 等. 双电机分布式驱动汽车高速稳定性机电耦合控制[J]. 机械工程学报, 2015, 51(16):29-40. ZHANG Lipeng, LI, Liang, QI Bingnan, et al. High speed stability electromechanical coupling control for dual-motor distributed drive electric vehicle[J]. Journal of Mechanical Engineering, 2015, 51(16):29-40.
[10] 李亮, 贾钢, 宋健, 等. 汽车动力学稳定性控制研究进展[J]. 机械工程学报, 2013, 49(24):95-107. LI Liang, JIA Gang, SONG Jian, et al. Progress on vehicle dynamics stability control system[J]. Journal of Mechanical Engineering, 2013, 49(24):95-107.
[11] MURATA S. Innovation by in-wheel-motor drive unit[J]. Vehicle System Dynamics, 2012, 50(6):807-830
[12] WANG Junnian, WANG Qingnian, JIN Liqiang, et al. Independent wheel torque control of 4WD electric vehicle for differential drive assisted steering[J]. Mechatronics, 2011, 21(1):63-76
[13] 褚文博, 罗禹贡, 韩云武, 等. 基于规则的分布式电驱动车辆驱动系统失效控制[J]. 机械工程学报, 2012, 48(10):90-95. CHU Wenbo, LUO Yugong, HAN Yunwu, et al. Rule-based traction system failure control of distributed electric drive vehicle[J]. Journal of Mechanical Engineering, 2012, 48(10):90-95.
[14] MIYAZAKI H, OHMAE T. Driving stability for electric vehicle with independently driven two wheels in case of inverter failure[C]//11th European Conference on Power Electronics and Applications, Dresden, Germany, 2005:1-9.
[15] WANG Rongrong, WANG Junmin. Fault-tolerant control with active fault diagnosis for four-wheel independently driven electric ground vehicles[J]. IEEE Transactions on Vehicular Technology, 2011, 60(9):4276-4287.
[16] IFEDI C J, MECROW B C, BROCKWAY S T M, et al. Fault tolerant in-wheel motor topologies for high performance electric vehicles[J]. IEEE Transactions on Industry Applications, 2013, 49(3):1249-1257.
[17] ZHANG Guoguang, ZHANG Hui, HUANG Xiaoyu, et al. Active fault-tolerant control for electric cehicles with independently driven rear in-wheel motors against certain actuator faults[J]. IEEE Transactions on Control Systems Technology, 2016, 24(5):1557-1572.
[18] LI Boyuan, DU Haiping, LI Weihua. Fault-tolerant control of electric vehicles with in-wheel motors using actuator-grouping sliding mode controllers[J]. Mechanical Systems and Signal Processing, 2016, 72-73:462-485.
[19] XIN Xiaoshuai, ZHENG Hangen, XU Hongbing, et al. Control strategy for four-wheel independent drive electric vehicles under failure of motor drive systems[J]. Transactions of the Institute of Measurement & Control, 2016, 38(2):129-140.
[20] 张利鹏,祁炳楠.一种车用双模式纯电驱动系统:中国, 201310635668.9[P].2016-05-11. ZHANG Lipeng, QI Bingnan. A dual-mode coupling drive system used in electric vehicle:China, 201310635668.9[P]. 2016-05-11.
[21] ZHANG Lingpeng, LI Liang, QI Bingnan, et al. Parameters optimum matching of pure electric vehicle dual-mode coupling drive system[J]. Science China Technological Sciences, 2014, 57(11):2265-2277.
[22] 张利鹏, 祁炳楠. 差速器在可变模式驱动系统中应用的可行性研究[J]. 机械传动, 2012, 36(7):102-106. Zhang Lipeng, Qi Bingnan. Study on the feasibility of differential application in variable mode drive system[J]. Journal of Mechanical Transmission, 2012, 36(7):102-106.
[23] LIU Hongbo, LEI Yulong, LI Zhanjiang, et al. Gear-shift strategy for a clutchless automated manual transmission in battery electric vehicles[J]. SAE International Journal of Commercial Vehicles, 2012, 5(1):57-62.
[24] 吴森, 周炳峰, 樊荣. 基于电机主动同步原理的AMT设计[J]. 武汉理工大学学报, 2010, 32(4):569-572. WU Sen, ZHOU Bingfeng, FAN Rong. Design of AMT based on active synchronous principle[J]. Journal of Wuhan University of Technology, 2010, 32(4):569-572.
[25] 胡建军, 李康力, 胡明辉等. 纯电动轿车AMT换档过程协调匹配控制方法[J]. 中国公路学报, 2012, 25(1):152-158. HU Jianjun, LI Kangli, HU Minghui, et al. Coordination matching control method of AMT gear shifting for pure electric car[J]. China Journal of Highway & Transport, 2012, 25(1):152-158.
[26] 张承宁, 武小花, 王志福, 等. 电动车辆AMT换档过程中驱动电机控制策略[J]. 北京工业大学学报, 2012(3):325-329. ZHANG Chengning, WU Xiaohua, WANG Zhifu, et al. Control strategy of driving motor during the AMT shifting on electric vehicles[J]. Journal of Beijing University of Technology, 2012(3):325-329.
[27] WALKER P D, ZHANG N. Numerical investigations into shift transients of dual clutch transmission equipped powertrains with multiple nonlinearities[J]. Journal of Vibration & Control, 2013, 21(8):1473-1486.
[28] STRINGER D B, SHETH P N, ALLAIRE P E. Modal reduction of geared rotor systems with general damping and gyroscopic effects[J]. Journal of Vibration & Control, 2010, 17(7):975-987.
[29] 吴荣华. 同步器换档特性分析与优化设计[D]. 重庆:重庆大学, 2012. WU Ronghua. Analysis and optimal design for synchromesh behaviour[D]. Chongqing:Chongqing University, 2012.
[30] ALIZADEH H V, HELWA M K, BOULET B. Constrained control of the synchromesh operating state in an electric vehicle's clutchless automated manual transmission[J]. Control Applications, 2014:623-628.
[31] 程潇骁. 电机变速器耦合系统换档过程动力学建模与控制策略研究[D]. 北京:清华大学, 2014. CHENG Xiaoxu. Dynamics Modeling and control strategy for the shifting process of coupled motortransmission system[D]. Beijing:Tsinghua University, 2014.
[32] LIU Huixian, LI Shihua. Speed control for PMSM servo system using predictive functional control and extended state observer[J]. IEEE Transactions on Industrial Electronics, 2012, 59(2):1171-1183.
[33] 郭伟, 倪家健, 周丽. 改进型预测函数控制算法及其应用[J]. 控制工程, 2013, 20(4):602-606. GUO Wei, NI Jiajian, ZHOU Li. Improved predictive functional control algorithm and its application[J]. Control Engineering of China, 2013, 20(4):602-606.
[34] WANG YANG, BOYD S. Fast model predictive control using online optimization[J]. IEEE Transactions on Control Systems Technology, 2010, 18(2):267-278.
[35] OSMAN K, FAUDZI A M, RAHMAT M F, et al. Predictive functional control with observer(PFC-O) design and loading effects performance for a pneumatic system[J]. Arabian Journal for Science and Engineering, 2015, 40(2):633-643.
Outlines

/