整体叶轮圆角立铣刀五轴U摆线剥铣轨迹规划

李佳男, 魏兆成, 冯景洋, 王学勤

Integral Impeller Fillet-end Milling Cutter Five-axis U Cycloid Stripping Milling Path Planning

LI Jianan, WEI Zhaocheng, FENG Jingyang, WANG Xueqin

机械工程学报 . 2024, (7): 212 -223 . DOI: 10.3901/JME.2024.07.212