为准确预测两粗糙表面的接触刚度，围绕考虑微凸体间发生相互作用时的法向结合面接触问题展开研究。基于圣维南原理和勒夫方程，建立微凸体相互作用所引起的局部变形量与局部接触载荷、两表面间压强、材料属性参数之间的函数关系；将其代入KE弹塑性接触模型中，建立考虑微凸体相互作用的KE接触刚度模型，并提出数值迭代方法进行求解；之后，分析在不同塑性指数下微凸体相互作用对接触载荷、面积、刚度间关系产生的影响规律，并给出考虑微凸体相互作用的KE及ZMC模型接触刚度对比。研究表明：微凸体相互作用对于两表面间平均距离与接触载荷的关系有着明显的影响，这使得真实接触面积与接触刚度与原未考虑微凸体相互作用的KE模型有明显差异，且随着塑性指数的增大，差异随之变小。最后，通过试验对考虑与未考虑微凸体相互作用的KE及ZMC模型接触刚度计算结果进行验证，试验对比分析表明：建立的考虑微凸体相互作用的KE接触刚度模型更加贴近试验结果。
田小龙
,
王雯
,
傅卫平
,
高志强
,
娄雷亭
,
吴洁蓓
,
李鹏阳
. 考虑微凸体相互作用的机械结合面接触刚度模型[J]. 机械工程学报, 2017
, 53(17)
: 149
-159
.
DOI: 10.3901/JME.2017.17.149
In order to accurately predict the contact characteristics of the two rough surfaces, in this paper, the contact problem of the rough surfaces when considering interaction between the surface asperities is studied. Based on the Saint Venant principle and the love equation, the function relationship between the local deformation quantity and the local contact load, the pressure between the joints and the material property parameters is established. After the function relationship substitution in KE model which using finite element method, put forward from the physical point of view, more stick close to the real contact state, and a numerical iterative method is proposed to solve the problem, the influence of the interaction between the asperities on the contact load, the real contact area and the contact stiffness is analyzed. The result shows, the interaction of the asperity has a significant effect on the relationship between the average distance of the two surface and the contact load, this makes it clear that the real contact area and contact stiffness of the asperity interaction KE model are obviously different with the result of KE model, and with the increase of the plastic index of rough surface, the difference is small; finally, the results of the KE and ZMC model of the asperities interaction are verified by the experimental results. The experimental analysis shows:the KE contact stiffness model of asperities interaction is more close to the experimental results.
[1] BURDEKIN M, BACK N, COWLEY A. Analysis of the local deformations in machine joints[J]. Journal of Mechanical Engineering Science, 1979, 21(1):25-32.
[2] CIAVARELLA M, MUROLO G, DEMELIO G. Elastic contact stiffness and contact resistance for the weier strass profile[J]. Mech. Phys. Solids, 2004, 52(6):1247-1265.
[3] DOLBEY M P, BELL R. The contact stiffness of joints at low apparent interface pressure[J]. Annals of the CIRP, 1971, 19(1):67-79.
[4] 黄玉美,傅卫平,佟浚贤. 结合面法向动态特性参数研究[J]. 机械工程学报, 1993, 29(3):74-78. HUANG Yumei, FU Weiping, TONG Junxian. Research on the normal dynamic characteristics parameters of machine joint surfaces[J]. Chinese Journal of Mechanical Engineering, 1993, 29(3):74-78.
[5] FU Weiping, HUANG Yumei, ZHANG Xueliang, et al. Experimental investigation of dynamic normal characteristics of machined joint surfaces[J]. Journal of Vibration and Acoustics, 2000, 122(4):393-398.
[6] GREENWOOD J A, WILLIAMSON J B P. Contact of nominally flat surfaces[J]. Proceedings of the Royal Society, 1966, 295(42):300-319.
[7] CHANG W R, ETSION I, BOGY D B. An elastic-plastic model for the contact of rough surfaces[J]. Journal of Tribology, 1987, 109(2):257-263.
[8] HORNG J H. An elliptic elastic-plastic asperity microcontact model for rough surfaces[J]. Journal of Tribology, 1998, 120(1):82-88.
[9] 尤晋闽, 陈天宁. 结合面静态接触参数的统计模型研究[J]. 振动与冲击, 2010, 29(11):47-50. YOU Jinmin, CHEN Tianning. Statistical model for static contact parameters of joint surfaces[J]. Journal of Vibration and Shock, 2010, 29(11):47-50.
[10] 庄艳,李宝童,洪军,等. 一种结合面法向接触刚度计算模型的构建[J]. 上海交通大学学报, 2013, 47(2):180-185. ZHUANG Yan, LI Baotong, HONG Jun, et al. A normal contact stiffness model of the interface[J]. Journal of Shanhai Jiao Tong University, 2013, 47(2):180-185.
[11] 田红亮,钟先友,秦红玲,等. 依据各向异性分形几何理论的固定结合部法向接触力学模型[J]. 机械工程学报, 2013, 49(21):108-122. TIAN Hongliang, ZHONG Xianyou, QIN Hongling, et al. Normal contact mechanics model of fixed joint interface adopting anisotropic fractal geometrical theory[J]. Journal of Mechanical Engineering, 2013, 49(21):108-122.
[12] ZHAO Yongwu, CHANG Liang. A model of asperity interactions in elastic-plastic contact of rough surfaces[J]. Journal of Tribology, 2000, 123(4):857-864.
[13] ZHAO Yongwu, MAIETTA D M, CHANG Liang. An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow[J]. Journal of Tribology, 1999, 122(1):86-93.
[14] JENG Y R, PENG S R. Elastic-plastic contact behavior considering asperity interactions for surfaces with various height distributions[J]. Journal of Tribology, 2005, 128(2):245-251.
[15] CIAVARELLA M, GREENWOOD J A, PAGGI M. Inclusion of "interaction" in the greenwood and williamson contact theory[J]. Wear, 2008, 265(56):729-734.
[16] CHANDRESKAR S, ERITEN M, POLYCARPOU A. An improved model of asperity interaction in normal contact of rough surfaces[J]. Journal of Applied Mechanics, 2013, 80(1):011025-8.
[17] KOGUT L, ETSION I. Elastic-plastic contact analysis of a sphere and a rigid flat[J]. Journal of Applied Mechanics, 2002, 69(5):657-662.
[18] VAKIS A I. Asperity interaction and substrate deformation in statistical summation models of contact between rough surfaces[J]. Journal of Applied Mechanics, 2013, 81(4):041012-1.
[19] KOGUT L, ETSION I. A finite element based elastic-plastic model for the contact of rough surfaces[J]. Tribology Transactions, 2003, 46(3):383-390.
[20] NURI K A, HALLING J. The normal approach between rough flat surfaces in contact[J]. Wear, 1975, 32(1):81-93.
[21] CIULLI E, FERREIRA L A, PUGLIESE G, et al. Rough contacts between actual engineering surfaces:Part I. Simple models for roughness description[J]. Wear, 2008, 264(11-12):1105-1115.
[22] 杨红平,傅卫平,王雯,等. 基于分形几何与接触力学理论的结合面法向接触刚度计算模型[J]. 机械工程学报, 2013, 49(1):102-107. YANG Hongping, FU Weiping, WANG Wen, et al. Calculation model of the normal contact stiffness of joints based on the fractal geometry and contact theory[J]. Journal of Mechanical Engineering, 2013, 49(1):102-107.
