机械工程学报 >

2017 , Vol. 53 >Issue 6: 145 - 151

DOI: https://doi.org/10.3901/JME.2017.06.145

可再生能源与工程热物理

新型板式换热器导流区特性的数值模拟及场协同分析*

  • 张仲彬 ,
  • 张浩 ,
  • 刘洋 ,
  • 郑孔桥 ,
  • 徐志明
展开
  • 东北电力大学能源与动力工程学院 吉林 132012
张仲彬(通信作者)，男，1973年出生，博士，教授。主要研究方向为强化传热及表面材料阻垢。E-mail：zhangzhongb@126.com

网络出版日期: 2017-03-20

基金资助

* 国家自然科学基金资助项目(51476025); 20160621收到初稿，20161220收到修改稿;

收起

Numerical Simulation and Field Synergy Principle Analysis on the Characteristic for New Distribution Region of Plate Heat Exchanger

  • ZHANG Zhongbin ,
  • ZHANG Hao ,
  • LIU Yang ,
  • ZHENG Kongqiao ,
  • XU Zhiming
Expand
  • School of Energy and Power Engineering， Northeast Dianli University， Jilin 132012

Online published: 2017-03-20

Fold

摘要

增大总传热系数和减小压降是当前研究改善板式换热器性能主要关注的两个方向。为分析导流区结构对板式换热器传热、压降以及场协同关系的影响效果，建立两种板式换热器计算模型。利用计算流体力学(Computational fluid dynamics，CFD)软件对两种板式换热器模型内流体不同工况下的流动和传热特性进行数值模拟，对比分析了两种模型流道内的速度场、温度场和压力场以及各场间协同性，并利用强化换热综合性能指数(Performance evaluation criteria， PEC)进行评价。结果表明：新型导流区使板式换热器板间流体的速度场与温度场分布更均匀，压降阻力减少，其综合性能更优。同时，场协同理论分析也表明，新型导流区改善了速度与压力场的协同关系。该新型板式换热器导流区设计对于提高板式换热器性能具有指导意义。

关键词： 板式换热器; 导流区; 数值模拟; 场协同

本文引用格式

张仲彬 , 张浩 , 刘洋 , 郑孔桥 , 徐志明 . 新型板式换热器导流区特性的数值模拟及场协同分析*[J]. 机械工程学报, 2017 , 53(6) : 145 -151 . DOI: 10.3901/JME.2017.06.145

Abstract

Improving plate heat exchanger’s performance by increasing the overall heat transfer,as well as minimising pressure drop is one of the promising fields of research to focus on. In order to analyze the effects of distribution region construction on heat transfer,pressure drop performance and field synergy of plate heat exchanger,the two calculation models for plate heat exchanger is established. The flow and heat transfer characteristics of plate heat exchanger are simulated with computational fluid dynamic software. The velocity,temperature and pressure field of two models and their synergy relationship are compared and analyzed in the various conditions. At the same time,the enhanced heat transfer performances of plate heat exchanger are evaluated detailedly by performance evaluation criteria (PEC).The results show that the uniformity temperature field and better pressure drop effect is got for plate heat exchanger with new distribution region,and its general performances are better than traditional plate heat exchanger. Based on field synergy principle,the synergy between both pressure field and velocity field is improved by distribution region construction. The developed new distribution region of plate heat exchanger can be used for designing of plates with geometry.

Key words： plate heat exchanger; distribution region; numerical simulation; field synergy

参考文献

 [1] 黄莉. 板式换热器波纹参数优化的数值模拟试验研究[D]. 北京：北京化工大学，2010.
 HUANG Li. Numerical simulation of corrugation parameters optimization of plate heat exchanger with experimental method[D]. Beijing：Beijing University of Chemical Technology，2010.
 [2] 张晶，文珏，赵力，等. 基于计算流体力学数值模拟的板式换热器传热与流动分析及波纹参数优化[J]. 机械工程学报，2015，51(12)：137-145.
 ZHANG Jing，WEN Jue，ZHAO Li，et al. Heat transfer and flow analysis and corrugation parameters optimization of the plate heat exchanger based on computational fluid dynamics numerical simulation[J]. Journal of Mechanical Engineering，2015，51(12)：137-145.
 [3] LI W，LI H，LI G，et al. Numerical and experimental analysis of composite fouling in corrugated plate heat exchangers[J]. International Journal of Heat and Mass Transfer，2013，63：351-360.
 [4] MERDIAN M A，POUTE R. Hydrodynamics and thermal characteristics of corrugated channels：Computational approach[J]. Applied Mathematical Modeling，2000，24(5-6)：343-364.
 [5] 张李铁，李彦洲. 板式换热器板片的发展现状研究[J]. 科技资讯，2014(31)：46-46.
 ZHANG Litie，LI Yanzhou. The development status research of plate heat exchanger[J]. Science and Technology information，2014(31)：46-46.
 [6] 张井志，田茂诚，张冠敏，等. 单边流板式换热器流动换热特性[C/CD]//第二十四届全国水动力学研讨会，2012.
 ZHANG Jingzhi，TIAN Maocheng，ZHANG Guanmin，et al. Flow and heat transfer characteristics of side-flow plate heat exchangers[C/CD]//The 23rd National Conference on Hydrodynamics，2012.
 [7] GALEAZZO F C C，MIURA R Y，GUT J A W，et al. Experimental and numerical heat transfer in a plate heat[J]. Chemical Engineering Science，2006，61(21)：7133-7138.
 [8] HAN X H，CUI L Q，CHEN S J，et al. A humerical and experimental study of chevron corrugated-plate heat exchangers[J]. International Communications in Heat and Mass Transfer，2010，37(8)：1008-1014.
 [9] 仇嘉，魏文建，张绍志，等. 基于CFD数值模拟的板式换热器分配器性能研究[J]. 机械工程学报，2010，46(14)：130-137.
 QIU Jia，WEI Wenjian，ZHANG Shaozhi，et al. Research on performance of distributors used in plate heat exchangers based on CFD numerical simulation[J]. Journal of Mechanical Engineering，2010，46(14)：130-137.
[10] 蔡毅，贾志刚，周文学，等. 人字形波纹板式换热器性能数值模拟的研究[J]. 计算机与应用化学，2009，26(1)：105-108.
 CAI Yi，JIA Zhigang，ZHOU Wenxue，et al. Hydrodynamics and thermal characteristics of chevron-type plate heat exchangers[J]. Computers and Applied Chemistry，2009，26(1)：105-108.
[11] 张如许，胡海涛，庄大伟，等. 板式换热器内两相流流量分配的模拟及实验验证[J]. 上海交通大学学报，2014，48(6)：788-792.
 ZHANG Ruxu，HU Haitao，ZHUANG Dawei，et al. Simulation and experimental validation of two-phase flow distribution in plate heat exchanger[J]. Journal of Shanghai Jiao Tong University，2014，48(6)：788-792.
[12] 吕恕位. 板式换热器板片导流区流动特性分析[D]. 长春：长春工业大学，2015.
 LÜ Shuwei. Plate heat exchanger plate of diversion area flow characteristic analysis[D]. Changchun：Changchun University of Technology，2015.
[13] 文珏，张晶，赵力，等. 新型人字形组合板式换热器及导流区的数值模拟[J]. 机械工程学报，2016，52(2)：150-156.
 WEN Jue，ZHANG Jing，ZHAO Li，et al. Numerical simulation of new combined plate heat exchangers and distribution region[J]. Journal of Mechanical Engineering，2016，52(2)：150-156.
[14] 徐志明，王月明，张仲彬. 板式换热器性能的数值模拟[J]. 动力工程学报，2011，31(3)：198-202.
 XU Zhingming，WANG Yueming，ZHANG Zhongbin. Numerical simulation on performance of plate heat exchangers[J]. Journal of Chinese Society of Power Engineering，2011，31(3)：198-202.
[15] 张仲彬，王丙林，李煜，等. 换热表面污垢热阻影响因素的评价研究[J]. 中国电机工程学报，2014，34(2)：266-271.
 ZHANG Zhongbin，WANG Binglin，LI Yu，et al. Evaluation studies of influencing factors on the fouling resistance of heat transfer surface[J]. Proceedings of the CSEE，2014，34(2)：266-271.
[16] 徐志明，黄兴，郭进生，等. 冷却水水质参数对板式换热器污垢特性的实验研究[J]. 工程热物理学报，2011，32(4)：645-647.
 XU Zhiming，HUANG Xing，GUO Jinsheng，et al. Experimental study of cooling water quality effect on fouling of plate heat exchanger[J]. Journal of Engineering Thermophysics，2011，32(4)：645-647.
[17] 过增元. 换热器中的场协同原则及其应用[J]. 机械工程学报，2004，39(12)：1-9.
 GUO Zengyuan. Principle of field coordination in heat exchangers and its applications[J]. Chinese Journal of Mechanical Engineering，2004，39(12)：1-9.
[18] 冷学礼. 振动圆管外强化传热机理及污垢生长特性研究[D]. 济南：山东大学，2007.
 LENG Xueli. Heat transfer enhancement mechanism and fouling development outside vibrating pipe[D]. Jinan：Shandong University，2007.
[19] 何雅玲，雷勇刚，田丽亭，等. 高效低阻强化换热技术的三场协同性探讨[J]. 工程热物理学报，2009，30(11)：1904-1906.
 HE Yaling，LEI Yonggang，TIAN Liting，et al. An analysis of three-field synergy on heat transfer augmentation with low penalty of pressure drop[J]. Journal of Engineering Thermophysics，2009，30(11)：1904-1906.
Options
文章导航

/

〈 〉

版权所有 © 《机械工程学报》编辑部

技术支持：北京玛格泰克科技发展有限公司