研究频变、磁变效应下的磁流变悬置的力学模型建立问题。以某磁流变悬置为例,根据Bingham模型,将悬置恢复力分为库仑阻尼力、弹性恢复力,黏性阻尼力三部分;通过分析各部分力与频率、磁场的相关性分析,提出一种改进的多项式Bingham参数化模型。该模型以外部电流、外载频率为变量,通过推导外部位移激励的能量耗散、储存关系,提出该多项式模型中九个待识别参数的辨识方法。设计了试验方案,并通过真实试验测试各种工况下该挤压式磁流变悬置的恢复力-位移关系,根据所提方法,得到在不同工况下的磁流变悬置的恢复力随电流、外载频率变化的关系。对比试验结果表明,该参数化模型在动刚度、滞后角以及滞回曲线上能良好地反映悬置的宽频段动力学特性。
The present work is about the dynamic model and the experimental testing of the magnetorheological fluid(MRF) mounts, especially at wide frequency. A squeeze MRF mounts is adopted, according to Bingham model, the react force of the mounts is divided to three parts which contains coulomb damping force, viscous damping force and elastic force. An advanced polynomial Bingham parameterization model is built by analysing the relationship between the frequency, magnetic field and the each part force. The applied current and the excitation frequency in this model as variable, nine variable parameters of the second order polynomial are found by testing different operating conditions. A verification test shows the reliability and the performance of the proposed model.
[1] 陈世嵬, 蹇开林, 李锐, 等. 车辆动力总成悬置系统参数识别[J]. 机械工程学报,2011,47(16)：79-85.
CHEN Shiwei, JIAN Kailin, LI Rui, et al. Parameter identification of vehicle powertrain mounting system[J]. Journal of Mechanical Engineering, 2011, 47(16)：79-85.
[2] 潘孝勇, 上官文斌, 柴国钟, 等．橡胶隔振器动态特性计算方法的研究[J]. 振动工程学报, 2009, 22(4)：345- 351．
PAN Xiaoyong, SHANGGUAN Wenbin, CAI Guozhong, et al. An investigation of calculation methods for the dynamic characteristics of rubber isolator[J] Journal of Vibration Engineering, 2009, 22(4)：345 -351．
[3] CHEN Shiwei, JIAN Kailin, LI Rui. Model identification of vehicle powertrain mounting system[J]. Metalurgia International, 2013, 18(4)：289-297.
[4] BEHROOZ M, SUTRISNO J, WANG Xiaojie, et al. A new isolator for vibration control[C/CD]// Proc. of SPIE, 2011, 7977：79770.
[5] DELATTRE A, MÉO S, LACROIX F, et al. Experimental and constitutive modeling of a filled rubber with emphasis on the dynamical properties[J]. Constitutive Models for Rubber, 2013(8)：137-145.
[6] de LIMA E J, FERRY M, SULAIMAN O O, et al. Rubber as an effective vibration absorber of outboard engine at small traditional fishing boats from the human health and safety point of view[J]. Journal of Engineering Computers & Applied Sciences, 2013, 2(2)：7-12.
[7] WANG Xiaojie, GORDANINEJAD F. A new magnetorheological fluid-elastomer mount：Phenomenological modeling and experimental study[J]. Smart Materials and Structures, 2009, 18(9)：095045.
[8] 潘孝勇, 谢新星, 上官文斌. 变振幅激励下的液阻橡胶隔振器动态特性分析[J]．振动与冲击, 2012, 31(1)：144-149.
PAN Xiaoyong, XIE Xinxing, SHANGGUAN Wenbin. Dynamic properties analysis for a hydraulic rubber isolator under excitations with different amplitudes[J]. Journal of Vibration and Shock, 2012, 31(1)：144-149.
[9] HOANG N, ZHANG N, DU H. An adaptive tunable vibration absorber using a new magnetorheological elastomeric for vehicular powertrain transient vibration reduction[J]. Smart Materials and Structures, 2011, 20(1)：015019.
[10] 史文库, 侯锁军. 磁流变发动机悬置隔振性能与模糊 PID 控制[J]. 农业工程学报, 2012, 28(20)：50-57.
SHI Wenku, HOU Suojun. Vibration isolation performance and fuzzy PID control method of magneto-rheological fluid engine mount[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(20)：50-57.
[11] SHANGGUAN W B, LU Z H, SHI J J. Finite element analysis of static elastic characteristics of the rubber isolator sinuate motive dynamic systems[R]. SAE, 2003-01-0240, 2003.
[12] WANG L R, LU H. Modeling method of constitutive law of rubber hyper elasticity based on finite element simulations [J]. Rubber Chemistry and Technology, 2003, 76(l)：271-85.
[13] 朱俊涛, 徐赵东. 基于分数阶导数的磁流变弹性体参数模型[J]. 工程力学, 2012, 29(8)：45-49.
ZHU Juntao, XU Zhaodong. The parameter model of magnetorheological elastomers based on fractional derivtive[J]. Engineering Mechanics, 2012, 29(8)：45-49.
[14] SPAGGIARI A, DRAGONI E. Efficient dynamic modeling and characterization of a magnetorheological damper[J]. Meccanica, 2012,47：2041-2054.
[15] LI R, CHEN W M, LIAO C R. Hierarchical fuzzy control for engine isolation via magnetorheological fluid mounts[J]. Proceedings of the Institution of Mechanical Engineers, Part D：Journal of Automobile Engineering, 2010, 224(2)：175-187.
[16] CHOI S B, LEE S K, PARK Y P. A hysteresis model for the field-dependent damping force of a magneto-rheological damper[J]. Journal of Sound and Vibration, 2001, 245(2)：375-383.
[17] 付华,傅周东,吴根茂,等. 挤压式磁流变体减振器阻尼力分析[J]. 机械工程学报,2003, 39(2)：62-65.
FU Hua, FU Zhoudong, WU Genmao, et al. Analysis on squeeze-mode MR vibration isolator damper force[J]. Chinese Journal of Mechanical Engineering, 2003, 39(2)：62-65.
[18] SIMS N D, STANWAY R, JOHNSON A R, et al. Vibration isolation using a magnetorheological damper in the squeeze-flow mode[C]//1999 Symposium on Smart Structures and Materials. International Society for Optics and Photonics, 1999：520-526.
[19] JOLLY M R, CARLSON J D. Controllable squeeze film damping using magnetorheological fluid[C/CD]// Actuator 96, 5th Int. Conf. on New Actuators, 1996.
