机械工程学报 >

2016 , Vol. 52 >Issue 9: 165 - 375

DOI: https://doi.org/10.3901/JME.2016.09.165

制造工艺与装备

大中型光学元件高效精密磨削技术研究综述

  • 金滩 ,
  • 李平 ,
  • 肖航 ,
  • 吴耀
展开
  • 湖南大学国家高效磨削工程技术研究中心 长沙 410082

网络出版日期: 2016-05-05

基金资助

国家自然科学基金(751215083)和国家科技支撑计划(797102003)资助项目

收起

Research Summary on Precision Grinding Technology Oriented to Achieve High Process Efficiency for Large and Middle-scale Optic

  • JIN Tan ,
  • LI Ping ,
  • XIAO Hang ,
  • WU Yao
Expand
  • National Engineering Research Centre for High Efficiency Grinding, Hunan University, Changsha 410082

Online published: 2016-05-05

Fold

摘要

近年来,大中型光学元件(包括平面、球面、非球面及自由曲面)在大型天文望远镜、高功率激光核聚变装置及精密光学测量装置的应用日益广泛,其大批量生产需求驱动了高效精密磨削技术的长足发展。然而,超精密大中型光学元件的短周期、大批量生产对现阶段光学制造能力提出了巨大挑战,同时也推动着其磨削装备技术和磨削工艺技术向更高效率、更高精度及更高自动化水平的方向发展。系统总结大中型光学元件磨削装备技术中机床整机、主轴单元、进给工作台、数控系统和磨削工艺技术中脆性材料塑性去除机理、磨削工具、磨削液及其注入方式、工艺路线规划、检测、误差建模及补偿、环境监控等技术的研究现状,并对上述关键技术问题进行详尽的分析。同时,提出解决上述问题的可能性对策,预测和展望大中型光学元件高效精密磨削技术未来发展趋势。

关键词： 大中型光学元件; 高效精密磨削技术; 磨削装备; 磨削工艺

本文引用格式

金滩 , 李平 , 肖航 , 吴耀 . 大中型光学元件高效精密磨削技术研究综述[J]. 机械工程学报, 2016 , 52(9) : 165 -375 . DOI: 10.3901/JME.2016.09.165

Abstract

Precision grinding technology oriented to achieve high process efficiency has been developed largely in recent years, driven by the mass production requirements for making the large and middle-scale optics of plane, spherical, aspherical and freeform surfaces used in large astronomical telescopes, high power laser fusion devises and precision optical metrology devices. The grand challenge for providing extraordinary massive numbers of these large and middle-scale optics of ultra-precision in short time has pushed the grinding equipment and grinding process technology move towards much higher efficiency, higher precision and higher automation level. The research status of grinding equipment and grinding process for large and middle-scale optic are systematically summarized and detailed analyzed from the aspects of complete machine, spindle unit, feed table, NC system, brittle-ductile transition mechanism, grinding tools, grinding fluid and its injection, process route planning, measuring, error modeling and compensation, as well as environmental monitoring and so on. Meanwhile, the feasible countermeasures to solve the key technology problems mentioned are presented. And the future development tendency of precision grinding technology oriented to achieve high process efficiency for large and middle-scale optic is predicted and prospected.

Key words： large and middle-scale optic; precision grinding technology oriented to achieve high process efficiency; grinding equipment; grinding process

参考文献

[1] STEPP L M,STROM S E. The thirty-meter telescope project design and development phase[C]//Proc. SPIE 5382,2004：67-75.
[2] GILMOZZI R,SPYROMILIO J. The European extremely large telescope (E-ELT)[J]. ESO Messenger,2007,127(11)：11-19.
[3] CAMPBELL J H,HAWLEY-FEDDER R,STOLZ C J,et al. NIF optical materials and fabrication technologies：An overview[C]//Proceeding of SPIE,2004：84-101.
[4] CAMPBELL J H. Laser glass：A key material in the search for fusion energy,UCRL-JC-134385[EB/OL]. California. UNT：Digital Library,1999. http：//digital.library.unt.edu/ark：/ 67531/metadc618897/.
[5] 李圣怡,戴一帆．大中型光学非球面镜制造与测量新技术[M]．北京：国防工业出版社,2011． LI Shengyi,DAI Yifan. New technology for manufacturing and measurement of large and Middle-scale aspheric surfaces[M]. Beijing：National Defense Industry Press,2011.
[6] BRINKSMEIER E,MUTLUGUNES Y,KLOCKE F,et al. Ultra-precision grinding[J]. CIRP Annals- Manufacturing Technology,2010,59(2)：652-671.
[7] SHORE P,MORANTZ P. Ultra-precision：Enabling our future[J]. Philosophical Transactions,2012,370(1973)：3993-4014.
[8] SHORE P,CUNNINGHAM C,DEBRA D,et al. Precision engineering for astronomy and gravity science[J]. CIRP Annals-Manufacturing Technology,2010,59(2)：694-716.
[9] LEADBEATER P B,CLARKE M,WILLS-MOREN W J,et al. A unique machine for grinding large,off-axis optical components：The OAGM 2500[J]. Precision Engineering,1989,11(4)：191-196.
[10] TONNELLIER X. Precision grinding for rapid manufacturing of large optics[D]. England：Cranfield University,2009.
[11] DÖHRING T. Polishers around the globe：An overview on the market of large astronomical mirrors[C]// Proc.SPIE,915110,2014：1-13.
[12] SCHNEIDER Co.. SCG 600 - grinding of large flats,spheres and aspheres[EB/OL]. http：//www.schneider-om. com/products/precision-optics/grinding/ scg-600.html.
[13] SATISLOH Co.. GI[EB/OL]. http：//www.satisloh.com/ home/precisionoptics/generating/gi/.
[14] OPTIPRO Co.. CNC optical grinding machines[EB/OL]. http：//www.optipro.com/cnc-grinding.html.
[15] MORANTZ P,SHORE P,STEPHENSON D J,et al. From tetrahedral to box：Design philosophy behind the Cranfield Big OptiX system[C]//In Proc. 5th Int. Euspen. Conf.,1．Montpellier,France,2005：17-20.
[16] SCHNEIDER Co.. SCG 500 - grinding of large aspheres and spheres[EB/OL]. http：//www.schneider-om.com/ products/precision-optics/grinding/scg-500.html.
[17] KOZO A,TOSHIHUMI I,YUTAKA K. Development of an ultra-precision grinding machine with trigonal prism type pentahedral structure for 400 mm Silicon water[C]//Proc. 1st Int. Euspen. Conf.．Bremen,Germany,1999：16-19.
[18] ZHAO Q,LIANG Y,STEPHENSON D,et al. Surface and subsurface integrity in diamond grinding of optical glasses on Tetraform ‘C’[J]. International Journal of Machine Tools & Manufacture,2007,47(14)：2091-2097.
[19] 王贵林,李圣怡,戴一帆．光学非球面复合加工机床的设计与精度分析[J]．中国机械工程,2004,15(2)：99-102． WANG Guilin,LI Shengyi,DAI Yifan. Design method and accuracy analysis of aspherical optical compound machine tool[J]. China Mechanical Engineering,2004,15(2)：99-102.
[20] 李勇,张向阳,谢晓丹．大口径光学镜面超精密加工机床的研制[J]．纳米技术与精密工程,2010,18(5)：428-432． LI Yong,ZHANG Xiangyang,XIE Xiaodan. Development of ultra-precision machine for large-sized mirror surface[J]. Nanotechnology and Precision Engineering,2010,18(5)：428-432.
[21] CORBETT J,MORANTZ P,STEPHENSON D J,et al. An advanced ultraprecision face grinding machine[J]. The International Journal of Advanced Manufacturing Technology,2002,20(9)：639-648.
[22] LUO X,CHENG K,WEBB D,et al. Design of ultraprecision machine tools with applications to manufacture of miniature and micro components[J]. Journal of Materials Processing Technology,2005,167(2)：515-528.
[23] PRECITECH Co.. Nanoform® 700 ultra[EB/OL]. http：//www.precitech.com/products/nanoform700ultra/nanoform_700_ultra.html.
[24] 郭隐彪,杨炜,王振忠,等．大口径光学元件超精密加工技术与应用[J]．机械工程学报,2013,49(19)：171-178． GUO Yinbiao,YANG Hui,WANG Zhenzhong,et al. Technology and application of ultra-precision machining for large size optic[J]. Journal of Mechanical Engineering,2013,49(19)：171-178.
[25] SHORE P,LUO X,JIN T,et al. Grinding mode of the "BOX" ultra-precision free-form grinder[C]// Proceedings of ASPE,2005：1-4.
[26] 张明亮,解旭辉．一种适合于超精密加工的特殊精密曲线插补算法[J]．中国机械工程,2000,11(8)：883-885． ZHANG Mingliang,XIE Xuhui. An interpolation algorithm for Ultra-precision CNC machining[J]. China Mechanical Engineering,2000,11(8)：883-885.
[27] JAYAKUMAR T,MUKHOPADHYAY C K,VENUGOPAL S,et al. A review of the application of acoustic emission techniques for monitoring forming and grinding processes[J]. Journal of Materials Processing Technology,2005,159(1)：48-61.
[28] YOSHINO M,OGAWA Y,ARAVINDAN S. Machining of hard-brittle materials by a single point tool under external hydrostatic pressure[J]. Journal of Manufacturing Science and Engineering,2005,127(4)：837-845.
[29] SCHINKER M G. Subsurface damage mechanisms at high-speed ductile machining of optical glasses[J]. Precision Engineering,1991,13(3)：208-218.
[30] VENKATACHALAM S. Predictive modeling for ductile machining of brittle[D]. Georgia：Georgia Institute of Technology,2007.
[31] BIFANO T G,DOW T A,SCATTERGOOD R O. Ductile-Regime grinding：A new technology for machining brittle materials[J]. Journal of Manufacturing Science and Engineering,1991,113(2)：184-189.
[32] WILLS-MOREN W J,CARLISLE K,MCKEOWN P A,et al. Ductile regime grinding of glass and other brittle materials by the use of ultra-stiff machine tools[C]// Proc.SPIE,1990：126-135.
[33] PARKS R E,LAM P,KUHN W. The large optical generator：A progress report[C]// Proc.SPIE,1985：28-31.
[34] KOCH N. Duktile bearbeitung optischer gläser ZUR herstellung asphärischer optischer linsen[J]. Industrial Diamond Review,1992,2(1)：118-126.
KOCH N. Ductile processing of optical glasses FOR manufacture aspheric lenses optical[J]. Industrial Diamond Review,1992,2(1)：118-126.
[35] NAMBA Y,ABE M,KOBAYASHI A. Ultraprecision grinding of optical glasses to produce super-smooth surfaces[J]. CIRP Annals-Manufacturing Technology,1993,42(1)：417-420.
[36] SCHINKER M G,DÖLL W. Plasticity and fracture of inorganic glasses at high speed grinding[J]. LE Journal DE Physique Colloques,1982,43(C9)：603-606.
[37] KOVACH J A,BLAU P J,MALKIN S,et al. A feasibility investigation of high speed,low damage grinding for advanced ceramics[C]//5th International Grinding Conference,1993：1-16.
[38] HUANG H,YIN L. Grinding characteristics of engineering ceramics in high speed regime[J]. International Journal of Abrasive Technology,2007,1(1)：78-93.
[39] MALKIN S,HWANG T W. Grinding mechanisms for ceramics[J]. CIRP Annals-Manufacturing Technology,1996,45(2)：569-580.
[40] SUZUKI K,IWAI M,NINOMIYA S,et al. A new diamond wheel containing boron doped diamond abrasives enabling electrically conductive cutting edge and high thermal stability[J]. Key Engineering Materials,2005,291：57-62.
[41] CHEN X,ROWE W B,CAI R. Precision grinding using CBN wheels[J]. International Journal of Machine Tools & Manufacture,2002,42(5)：585-593.
[42] YIN S,MORITA S,OHMORI H,et al. ELID precision grinding of large special Schmidt plate for fibre multi-object spectrograph for 8.2 m Subaru telescope[J]. International Journal of Machine Tools & Manufacture,2005,14(4)：1598-1604.
[43] YIN S,OHMORI H,DAI Y,et al. ELID grinding characteristics of glass-ceramic materials[J]. International Journal of Machine Tools & Manufacture,2009,49(3)：333-338.
[44] HEINZEL C,RICKENS K. Engineered wheels for grinding of optical glass[J]. CIRP Annals- Manufacturing Technology,2009,58：315-318.
[45] PAULSEN G,ZACNY K,DREYER C B,et al. Robotic instrument for grinding rocks into thin sections (grits)[J]. Advances in Space Research,2013,51(1)：2181-2193.
[46] WALTER C,KOMISCHKE T,KUSTER F,et al. Laser-structured grinding tools-generation of prototype patterns and performance evaluation[J]. Journal of Materials Processing Technology,2014,214(4)：951-961.
[47] BUTLER-SMITH P,AXINTE D,DAINE M,et al. Mechanisms of surface response to overlapped abrasive grits of controlled shapes and positions：An analysis of ductile and brittle materials[J]. CIRP Annals- Manufacturing Technology,2014,63(1)：321-324.
[48] TONNELLIER X,SHORE P,LUO X,et al. Wheel wear investigations when precision grinding of optical materials using the BoX grinding mode[C]//Proceedings of 5th International Conf. on HSM,2006：177-187.
[49] KLOCKE F,BAUS A,BECK T. Coolant induced forces in CBN high speed grinding with shoe nozzles[J]. CIRP Annals-Manufacturing Technology,2000,49(1)：241-244.
[50] IRANI R A,BAUER R J,WARKENTIN A. A review of cutting fluid application in the grinding process[J]. International Journal of Machine Tools & Manufacture,2005,45(15)：1696-1705.
[51] XIE G Z,HUANG H. An experimental investigation of temperature in high speed deep grinding of partially stabilized zirconia[J]. International Journal of Machine Tools & Manufacture,2008,48(14)：1562-1568.
[52] GAO Y,TSE S,MAK H. An active coolant cooling system for applications in surface grinding[J]. Applied Thermal Engineering,2003,23(5)：523-537.
[53] RAMESH K,HUANG H,YIN L. Analytical and experimental investigation of coolant velocity in high speed grinding[J]. International Journal of Machine Tools & Manufacture,2004,44(10)：1069-1076.
[54] COMLEY P,MORANTZ P,SHORE P,et al. Grinding metro scale mirror segments for the E-ELT ground based telescope[J]. CIRP Annals-Manufacturing Technology,2011,60(1)：379-382.
[55] 李洁,雷向阳,钟波,等．大口径方形非球面镜的高效磨削技术研究[J]．金刚石与磨料磨具工程,2011,31(2)：74-78． LI Jie,LEI Xiangyang,ZHONG Bo,et al. Research of high efficiency grinding technology for large square aspheric lens[J]. Diamond & Abrasives Engineering,2011,31(2)：74-78.
[56] ZOBRIST T L,BURGE J H,DAVISON W B,et al. Measurements of large optical surfaces with a laser tracker[C]// Proc. SPIE,2008：70183U-701701.
[57] GEYL R,CAYREL M. REOSC contribution to VLT and Gemini[C]//Proc. SPIE,1999：40-46.
[58] SU T,PARK W H,PARKS R E,et al. Scanning long-wave optical test system：A new ground optical surface slope test system[C]// Proc. SPIE,2011：1-10.
[59] COLE G C,GARFIELD R,PETERS T,et al. An overview of optical fabrication of the JWST mirror segments at Tinsley[C]//Proc. SPIE,6265,2006：1-9.
[60] WANG Y,SU P,PARKS R E,et al. Swing arm optical coordinate-measuring machine：High precision measuring ground aspheric surfaces using a laser triangulation probe[J]. Optical Engineering,2012,51(7)：1-8.
[61] JIAN Wang,LI Yaguo,HAN Jinghua,et al. Evaluating subsurface damage in optical glasses[J]. Journal of the European Optical Society-Rapid PUBL,2011,6：1-16.
[62] ESMAEILZARE A,RAHIMI A,REZAEI S M. Investigation of subsurface damages and surface roughness in grinding process of Zerodur ® glass- ceramic[J]. Applied Surface Science,2014,313：67-75.
[63] FINE K R,GARBE R,GIP T,et al. Non-destructive real-time direct measurement of subsurface damage[C]// Proc. SPIE,5799,2005：105-110.
[64] LAMBROPOULOS J C. From abrasive size to subsurface damage in grinding[J]. Convergence,2000,8：1-3.
[65] RANDI J A,LAMBROPOULOS J C,JACOBS S D. Subsurface damage in some single crystalline optical materials[J]. Applied Optics,2005,44(12)：2241-2249.
[66] HUANG H,CHEN W K,KURIYAGAWA T. Profile error compensation approaches for parallel nanogrinding of aspherical mould inserts[J]. International Journal of Machine Tools & Manufacture,2007,47(5)：2237-2245.
[67] 康念辉,李圣怡,郑子文．基于多体系统理论的非球面磨削误差模型与补偿技术[J]．机械工程学报,2008,44(4)：143-149． KANG Nianhui,LI Shengyi,ZHENG Ziwen. Error model and compensation technology of aspheric grinding based on multibody system theory[J]. Chinese Journal of Mechanical Engineering,2008,44(4)：143-149.
[68] 林晓辉,郭隐彪,王振忠,等．大尺寸轴对称非球面磨削精度建模和分析[J]．机械工程学报,2013,49(17)：65-72． LIN Xiaohui,GUO Yinbiao,WANG Zhenzhong,et al. Precision model and analysis of large axisymmetric aspheric grinding[J]. Journal of Mechanical Engineering,2013,49(17)：65-72.
Options
文章导航

/

〈 〉

版权所有 © 《机械工程学报》编辑部

技术支持：北京玛格泰克科技发展有限公司