基于橡胶哑铃形试件的疲劳试验结果，分别以最大主工程应变、最大主对数应变、最大主Green-Lagrange应变、八面体切应变、应变能密度、Luo等效应力、Saintier等效应力为损伤参量建立七种橡胶疲劳寿命预测模型。应用此七种模型预测某汽车动力总成橡胶悬置的疲劳寿命，对比不同寿命模型的预测效果。研究结果表明，以最大主工程应变、最大主对数应变、最大主Green-Lagrange应变、八面体切应变、应变能密度为损伤参量建立的寿命模型预测的疲劳寿命均在实测寿命的4倍分散线之内；以Luo应力、Saintiter应力为损伤参量建立的寿命预测模型的预测寿命落在实测寿命的2倍分散线之内。因此，以Luo应力、Saintiter应力为损伤参量建立的寿命预测模型预测效果更好，Luo应力、Saintier应力更适合作为疲劳损伤参量来预测橡胶隔振器的疲劳寿命。
上官文斌
,
段小成
,
刘泰凯
,
王小莉
,
郑国峰
,
俞斌
. 不同损伤参量对橡胶隔振器疲劳寿命预测结果影响的研究[J]. 机械工程学报, 2016
, 52(2)
: 116
-126
.
DOI: 10.3901/JME.2016.02.116
Based on the measured fatigue life of dumbbell cylindrical specimen, seven fatigue life prediction models using different damage parameters for predicting fatigue life of rubber isolators is presented. The damage parameters presented in this paper include the maximum principal engineering strain, maximum principal logarithmic strain, maximum principal Green-Lagrange strain, octahedral shear strain, strain energy density, Luo stress, Saintier stress. To investigate the effect of different damage parameters on the predicting fatigue life of rubber isolators, seven proposed prediction models are used to predict the fatigue life of a typical powertrain rubber mount. The fatigue life of the mount predicted by the seven models is estimated and is compared with the experimental fatigue life. The fatigue life calculated using the models with maximum principal engineering strain, maximum principal logarithmic strain, maximum principal Green-Lagrange strain, octahedral shear strain or strain energy density as the damage parameter is in agreement with the experimental fatigue life within a factor of four. The model using Luo stress or Saintier stress as damage parameter can predict the fatigue life within a factor of two, which is better than the other models. It’s concluded that the proposed model for fatigue life prediction with the Luo stress or Saintier stress can be used to estimate the fatigue life for rubber isolator.
[1] LIU Xiaoang，SHANGGUAN Wenbin. Elastomeric components for noise and vibration isolation and control in the automotive industry[M]//DAVID C，DAVID E F，TOSHIO K，et al. Encyclopedia of automotive engineering. New Jersey：John Wiley & Sons Ltd.，2014：1-17.
[2] AYOUB G，NAÏT-ABDELAZIZ，ZAÏRI M F. Multiaxial fatigue life predictors for rubbers：Application of recent developments to a carbon-filled SBR[J]. International Journal of Fatigue，2014，66：168-176.
[3] MARS W V，FATEMI A. A literature survey on fatigue analysis approaches for rubber[J]. International Journal of Fatigue，2002，24：949-961.
[4] MARS W V. Multiaxial fatigue of rubber[D]. Toledo：The University of Toledo，2001.
[5] MARS W V，FATEMI A. Multiaxial fatigue of rubber：Part I：Equivalence criteria and theoretical aspects[J]. Fatigue & Fracture of Engineering Materials & Structures，2005，28(6)：515-522.
[6] 王小莉，上官文斌，刘泰凯，等. 填充橡胶材料单轴拉伸疲劳试验及疲劳寿命模型研究[J]. 机械工程学报，2013，49(14)：65-73. WANG Xiaoli，SHANGGUAN Wenbin，LIU Taikai，et al. Experiment of uniaxial tension fatigue and modeling of fatigue life for filled natural rubbers[J]. Journal of Mechanical Engineering，2013，49(14)：65-73.
[7] MARS W V，FATEMI A. Multiaxial fatigue of rubber：Part II：Experimental observations and life predictions[J]. Fatigue & Fracture of Engineering Materials & Structures，2005，28(6)：523-538.
[8] LUO R K，COOK P W，WU W X. Fatigue life prediction and verification of rubber to metal bonded springs[J]. Constitutive Models For Rubber III，2003，55-57.
[9] LUO R K，MORTEL W J，WU X P. Fatigue failure investigation on anti-vibration springs[J]. Engineering Failure Analysis，2009，16：1366-1378.
[10] SAINTIER N，CAILLETAUD G，PIQUES R. Multiaxial fatigue life prediction for a natural rubber[J]. International Journal of Fatigue，2006，28(5)：530-539.
[11] BONET J. Nonlinear continuum mechanics for finite element analysis[M]. New York：Cambridge University Press，1997.
[12] MARCO A M，JAIME T P. Comparison among equivalent stress predictions based on spherical，ellipsoidal and prismatic hulls[C]//ABM Annual Congress，2011：2644-2655.
[13] 上官文斌，刘泰凯，王小莉，等. 汽车动力总成橡胶悬置的疲劳寿命实测与预测方法[J]. 机械工程学报，2014，50(12)：65-73. SHANGGUAN Wenbin，LIU Taikai，WANG Xiaoli，et al. Methods for measuring and prediction fatigue life rubber mounts of vehicle powertrain[J]. Journal of Mechanical Engineering，2014，50(12)：65-73.
[14] GENT A N，THOMAS A G. Forms for the stored (strain) energy function for vulcanized rubber[J]. Journal of Polymer Science，1958，28(118)：625-628.
[15] 林丹，寇纪松，李敏强. 遗传算法的基本理论与应用[M]. 北京：科学出版社，2002. LIN Dan，KOU Jisong，LI Minqiang. The fundamental theory and application of genetic algorithm[M]. Beijing：Science Press，2002.
[16] RONALD E W. Probability and statistics for engineers and scientists[M]. London：Pearson Prentice Hall，2007.
