为研究高速动车组车下悬吊系统在车轮磨耗下的振动特性演变规律,建立考虑车体弹性振动和车下悬吊设备的刚柔耦合动力学模型,分析一个镟轮周期内车轮磨耗对车体和车下悬吊设备振动响应的影响。研究结果表明：车轮磨耗主要影响车下悬吊系统的横向振动,对垂向振动影响较小;在前5万km运营里程下,车体和车下设备的振动特性基本保持不变,随着里程的增加,车体和悬吊设备的振动特性不断恶化,当运营里程达到19.1万km时,车体和悬吊设备的振动加速度幅值达到了新轮下的2倍;车辆运行速度不高于140 km/h时,车轮磨耗对车体和设备的振动影响甚微,随着速度的增加,车轮磨耗对车体和悬吊设备的影响逐渐增大;通过选取合理的横向悬吊刚度可以有效抑制车轮磨耗对悬吊系统的影响,其取值范围在0.7~1.5 MN/m内比较合适。
To study the evolution rule of carbody underneath suspended system vibration behavior under wheel wear, a rigid-flexible coupling dynamic model of high-speed EMUs is established considering the carbody elastic vibration. The influence of profile wear on vibration characteristic of carbody and its suspended equipment during one re-profile period is analyzed. The results show that wheel wear mainly effects of the lateral vibration of suspended system and has little influence on virtual vibration. The vibration of carbody and suspended equipment changes little during the first 50 thousand kilometers. With the growth of the railway running mileage, the vibration characteristics of carbody and suspended equipment continue deteriorates. At the point of 191 thousand kilometers, the acceleration amplitude can be twice of the new car. When the speed is less than 140 km/h, the wheel wear has little influence on vibration of the suspended system, and the influence increases with the speed raising. The influence of wheel profile wear on suspended system can be restrained by choosing a reasonable lateral suspended parameter and the range of the suitable lateral stiffness can be 0.7-1.5 MN/m.
[1] WU P B,ZENG J,DAI H Y. Dynamic response analysis of railway passenger car with flexible carbody model based on semi-active suspensions[J]. Vehicle System Dynamics,2004,41：774-783.
[2] ZHOU J,GOODAL R,REN L,et al. Influence of carbody vertical flexibility on ride quality of passenger railway vehicles[J]. Journal of Rail and Rapid Transit,2009,223(5)：461-471.
[3] 曾京,罗仁. 考虑车体弹性效应的铁道客车系统振动分析[J]. 铁道学报,2007,28(6)：19-25.
ZENG Jing,LUO Ren. Vibration analysis of railway passenger car system by considering flexible carbody effect[J]. Journal of the China Railway Society,2007,29(6)：19-25.
[4] 王文静,惠晓龙,马纪军. 高速列车设备舱支架疲劳裂纹机理研究[J]. 机械工程学报,2015,51(6)：142-147.
WANG Wenjing,HUI Xiaolong,MA Jijun. Fatigue crack mechanism research on high speed train equipment cabin frame[J]. Journal of Mechanical Engineering,2015,51(6)：142-147.
[5] 吴会超,邬平波,曾京,等. 车下设备对车体振动的影响[J]. 交通运输工程学报,2012,12(5)：50-56.
WU Huichao,WU Pingbo,ZENG Jing,et al. Influence of equipment under car on carbody vibration[J]. Journal of Traffic and Transportation Engineering,2012,12(5)：50-56.
[6] 周劲松,张伟,孙文静,等. 铁道车辆弹性车体动力吸振器减振分析[J]. 中国铁道科学,2009,30(3)：86-90.
ZHAO Jinsong,ZHANG Wei,SUN Wenjing,et al. Vibration reduction analysis of the dynamic vibration absorber on the flexible carbody of railway vehicles[J]. China Railway Science,2009,30(3)：86-90.
[7] 石怀龙,罗仁,邬平波,等. 基于动力吸振原理的动车组车下设备悬挂参数设计[J]. 机械工程学报,2014,50(14)：155-161.
SHI Huailong,LUO Ren,WU Pingbo,et al. Suspension parameters designing of equipment for electric multiple units based on dynamic vibration absorber theory[J]. Journal of Mechanical Engineering,2014,50(14)：155-161.
[8] 石怀龙,邬平波,罗仁. 高速动车组弹性车体和设备耦合振动特性[J]. 西南交通大学学报,2014,49(4)：693-699.
SHI Huailong,WU Pingbo,LUO Ren. Coupled vibration characteristics of flexible car body and equipment of EMU[J]. Journal of Southwest Jiaotong University,2014,49(4)：693-699.
[9] 罗光兵,曾京. 车下设备的连接方式及悬挂参数匹配研究[J]. 现代制造工程,2013(5)：1-6.
LUO Guangbing,ZENG Jing. Study on carbody flexible vibrations with considering underframe suspended equipment[J]. Modern Manufacturing Engineering,2013(5)：1-6.
[10] LUO G B,ZENG J,WANG Q S. Identifying the relationship between suspension parameters of underframe equipment and carbody modal frequency[J]. Journal of Modern Transportation,2014,22(4)：206-213.
[11] POMBO J,AMBROSIO J,PEREIRA M,et al. A study on wear evaluation of railway wheels based on multibody dynamics and wear computation[J]. Multibody System Dynamics,2010,24：347-366.
[12] 王忆佳,曾京,罗仁,等. 高速列车车轮磨耗与轮轨接触几何关系的研究[J]. 振动与冲击,2014,33(7)：45-50.
WANG Yijia,ZENG Jing,LUO Ren,et al. Wheel profile wear and wheel/rail geometric relation for a high-speed train[J]. Journal of Vibration and Shock,2014,33 (7)：45-50.
[13] 张铁,张军,盛友艺,等. 重载铁路不同磨耗阶段车轮与曲线钢轨的接触分析[J]. 机械工程学报,2014,50(18)：142-147.
ZHANG Tie,ZHANG Jun,SHENG Youyi,et al. Analysis of contact between wheel and rail with different wear profiles in curve on heavy haul railway[J]. Journal of Mechanical Engineering,2014,50(18)：142-147.
[14] 李艳,张卫华,周文祥. 车轮型面磨耗对车辆服役性能的影响[J]. 西南交通大学学报,2010,45(4)：549-554.
LI Yan,ZHANG Weihua,ZHOU Wenxiang. Influence of wear of wheel profile on dynamic performance of EMU[J]. Journal of Southwest Jiaotong University,2010,45(4)：549-554.
[15] WICKENS A H. Fundamentals of railway vehicle dynamics[M]. Lisse：Swets & Zeitlinger Publishers,2003.
