机械工程学报 >

2016 , Vol. 52 >Issue 8: 76 - 89

DOI: https://doi.org/10.3901/JME.2016.08.076

材料科学与工程

金属材料准静态断裂性能标准测试技术研究进展*

  • 包陈 ,
  • 蔡力勋 ,
  • 石凯凯 ,
  • 但晨 ,
  • 姚瑶
展开
  • 1. 西南交通大学力学与工程学院 成都 610031;
    2. 西南交通大学应用力学与结构安全四川省重点实验室 成都 610031
包陈,男,1982年出生,讲师。主要研究方向为结构完整性评价。E-mail：bchxx@163.com;蔡力勋(通信作者),男,1959年出生,教授。主要研究方向为结构疲劳与安全评估。E-mail：lix_cai@263.net;石凯凯,男,1989年出生,博士研究生。主要研究方向为材料疲劳与断裂行为评价。E-mail：shikai1000@163.com;但晨,男,1989年出生,硕士研究生。主要研究方向为材料断裂行为。E-mail：kvab2003@163.com;姚瑶,女,1988年出生,硕士研究生。主要研究方向为材料断裂行为。E-mail：yaoyao19881229@163.com

网络出版日期: 2016-04-15

基金资助

国家自然科学基金(11072205,11202174,11472228)和四川省青年科技创新团队(2013TD0004)资助项目

收起

Progress on the Standard Test Technology of Quasistatic Fracture Toughness for Metallic Materials

  • BAO Chen ,
  • CAI Lixun ,
  • SHI Kaikai ,
  • DAN Chen ,
  • YAO Yao
Expand
  • 1. School of Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031;
    2. Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, Southwest Jiaotong University, Chengdu 610031)

Online published: 2016-04-15

Fold

摘要

准静态断裂性能是评价含裂纹结构完整性的重要力学参量,其测试规范的制修订可反映国家在国际断裂测试领域的技术水平。由于较复杂的断裂力学理论背景以及长期经费投入乏力,我国的断裂性能测试规范自主创新修订工作严重落后于国际水平。自2011年立项至今,历经3年的不懈研究,完成了新版国家断裂测试规范GB/T 21143-2014的修订,且在原规范的基础上取得了许多新进展。主要包括：对基于柔度原理的裂纹长度计算公式进行了简化,完善了原有J积分和CTOD计算式;推荐了考虑断裂试样大角度转动影响的旋转修正新方法;借鉴ASTM E1820-11规范,引入了改良后的单试样规则化法。为了更好地促进新规范的推广应用,本文就新规范修订中涉及的上述技术的研究进展进行详细综述。

关键词： 准静态断裂性能; 测试规范修订; GB/T 21143-2014; 柔度法; 旋转修正; 单试样载荷分离法

本文引用格式

包陈 , 蔡力勋 , 石凯凯 , 但晨 , 姚瑶 . 金属材料准静态断裂性能标准测试技术研究进展*[J]. 机械工程学报, 2016 , 52(8) : 76 -89 . DOI: 10.3901/JME.2016.08.076

Abstract

The quasistatic fracture toughnesses are key parameters in the integrity assessment of structures containing cracks, so the revision of testing specification for these parameters can evidently reflect the technological level in the field of fracture toughness testing. In view of complicated fracture mechanics background and long-standing short of financial support, the national self-renovation in the revision of fracture toughness testing specification slips far behind international level. From the project determination in 2011, the revision of testing specification GB/T 21143-2014 has been completed in 3 years, and greatprogresses have been made in comparison with the original version. The main revision of the new specification contains a simplified formula of crack length estimation on the basis of compliance principle has been provided; the formulae for the calculation of J integral and CTOD have been improved; a new rotational correction method considering the large rotation effect on the fracture toughness determination has been recommended; by referring to ASTM E1820-11, a modified single specimen normalization method has been introduced. In order to promote the widespread application of this new specification, the progress of those related key techniques in this revision is reviewed in detail.

Key words： quasistatic fracture toughness; revision of testing specification; GB/T21143-2014; compliance method; rotation correction; single specimen load separation method

参考文献

[1] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. GB/T 21143-2007. 金属材料准静态断裂韧度的统一试验方法[S]. 北京：中国标准出版社,2007.
General Administration of Quality Supervision,Inspection and Quarantine of the People’s Republic of China,Standardization Administration of the People’s Republic of China. GB/T 21143-2007. Metallic materials—Unified method of test for determination of quasistatic fracture toughness[S]. Beijing：Standard Press of China,2007.
[2] International Organization for Standardization. ISO 12135-2002(E),International standard of unified method of test for the determination of quasistatic fracture toughness[S]. Switzerland：International Organization for Standardization,2002.
[3] American Society for Testing and Materials. ASTM E399-12. Standard test methods for linear-elastic plane-strain fracture toughness KIC of metallic materials[S]. Philadelphia,PA：American Society for Testing and Materials,2012.
[4] American Society for Testing and Materials.ASTM E1820-13. Standard test methods for measurement of fracture toughness[S]. Philadelphia,PA：American Society for Testing and Materials,2013.
[5] British Standard Institution. BS 7448-1:1991. Fracture mechanics toughness tests-Part 1：Method for determination of KIC,critical CTOD and critical J values of metallic materials[S]. Lodnon：Annual Book of British Standards. Technical Committee ISM/NFM/4,1991.
[6] British Standard Institution. BS 7448-2:1997. Fracture mechanics toughness tests-Part 1：Method for determination of KIC,critical CTOD and critical J values of welds in metallic materials[S]. Lodnon：Annual Book of British Standards. Technical Committee ISM/NFM/4,1997.
[7] British Standard Institution. BS 7448-3:2005. Fracture mechanics toughness tests-Part 4：Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa.m0.5s-1[S]. Lodnon：Annual Book of British Standards. Technical Committee ISM/NFM/4,2005.
[8] British Standard Institution. BS 7448-4：1997. Fracture mechanics toughness tests-Part 4：Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials[S]. Lodnon：Annual Book of British Standards. Technical Committee ISM/NFM/4,1997.
[9] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. GB/T 6398-2000. 金属材料疲劳裂纹扩展速率试验方法[S]. 北京：中国标准出版社,2000.
General Administration of Quality Supervision,Inspection and Quarantine of the People’s Republic of China,Standardization Administration of the People’s Republic of China. GB/T 6398-2000. Metallic materials—method of test for determination of fatigue crack growth[S]. Beijing：Standard Press of China,2000.
[10] 蔡力勋,包陈,金蕾. 金属材料断裂力学柔度测试技术的问题与发展[J]. 中国测试,2009,35(1)：9-18.
CAI Lixun,BAO Chen,JIN Lei. Compliance testing technology used for fracture properties of metallic materials：Problems and development[J]. China Measurement & Test,2009,35(1)：9-18.
[11] ZHANG Zhiliang,XU Jie,NYHUS B,et al. SENT methodology for pipeline applications[C/CD]//18th European Conference on Fracture,2010.
[12] SHENANIGANS G,GIANETTO J A,TYSON W R. Measurement of J-R curves using single specimen technique on clamped SE(T) specimens[C/CD]// Proceedings of 18th International Conference on Offshore and Polar Engineering,Osaka,Japan,June 21-26,2009.
[13] CRAVERO S,RUGGIERI C. Estimation procedure of J-resistance curves for SE(T) fracture specimens using unloading compliance[J]. Engineering Fracture Mechanics,2007,74：2735-2757.
[14] RUGGIERI C. Further results in J and CTOD estimation procedures for SE(T) fracture specimens- Part I：homogeneous materials[J]. Engineering Fracture Mechanics,2012,79：245-265.
[15] 姚瑶. 用于获取金属材料延性断裂韧性的非标准试样测试方法研究[D]. 成都：西南交通大学,2013.
YAO Yao. The fracture toughness testing methods of non-standard specimens and their application[D]. Chengdu：Southwest Jiaotong University,2013.
[16] 金蕾. 基于数值分析的金属材料断裂力学柔度测试方法研究[D]. 成都：西南交通大学,2009.
JIN Lei. Research on fracture mechanics compliance test method of metallic materials based on numerical analysis[D]. Chengdu：Southwest Jiaotong University,2009.
[17] 包陈,蔡力勋,陈燕. 柔度发研究镍铬合金焊材的高温疲劳裂纹扩展行为[J]. 固体力学学报,2010,31(1)：8-15.
BAO Chen,CAI Lixun,CHEN Yan. Estimation of fatigue crack growth rates for nickel-chromium alloy welding materials at high temperature using the compliance method[J]. Chinese Journal of Solid Mechanics,2010,31(1)：8-15.
[18] 但晨. 小尺寸试样材料断裂性能测试方法与应用[D]. 成都：西南交通大学,2014.
DAN Chen. The fracture toughness testing methods for small size specimens and their application[D]. Chengdu：Southwest Jiaotong University,2014.
[19] GRAY R A,Jr LOSS F J,MENKE B H. Development of J-R curve procedures[R]. NRL-EPRI RP 886.2,1979.
[20] LOSS F J. Structural integrity of water reactor pressure boundary components[R]. NRL-Memo-4112,1979.
[21] JOYCE J A,LINK R E. Effects of tensile loading on upper shelf fracture toughness[R]. AD-A284 364,1994.
[22] JOYCE J A,LINK R E. Effects of constraint on upper shelf fracture toughness[J]. ASTM Special Technical Publication,1995(1256)：142-177.
[23] CRAVERO S,RUGGIERI C. Estimation procedure of J-resistance curves for SE(T) fracture specimens using unloading compliance[J]. Engineering Fracture Mechanics,2007(74)：2735-2757.
[24] BAO Chen,CAI Lixun,SHI Kaikai,et al. Estimation of J-resistance curves for CT specimen based on unloading compliance method and CMOD data[J]. Journal of Testing and Evaluation,2015,43(3)：1-12.
[25] BAO Chen,CAI Lixun. Investigation on compliance rotation correction for compact tensile specimen in unloading compliance method[J]. Acta Mechanica Solida Sinica,2011,24(2)：144-152.
[26] 蔡力勋,包陈. 金属材料延性断裂韧度测试中的柔度方法研究[J]. 航空学报,2010,31(10)：1974-1984.
CAI Lixun,BAO Chen. Investigation on compliance test method for ductile fracture toughness of metallic materials[J]. Acta Aeronautica et Astronautica Sinica,2010,31(10)：1974-1984.
[27] 石凯凯,蔡力勋,包陈,等. 断裂韧性测试的量纲一载荷分离法及应用[J]. 浙江大学学报,2012,46(7)：1201-1206.
SHI Kaikai,CAI Lixun,BAO Chen,et al. Fracture toughness test by dimensionless load separation method and application[J]. Journal of Zhejiang University,2012,46(7)：1201-1206.
[28] YAO Yao,CAI Lixun,BAO Chen,et al. The fined COD transform formula for CT specimens to investigate material fracture toughness[J]. Applied Mechanics and Materials,2012,188：11-16.
[29] 姚瑶,蔡力勋,包陈. 用于弯曲型试样断裂韧性计算的COD转换公式精解[J]. 中国测试,2013,39(1)：25-30.
YAO Yao,CAI Lixun,BAO Chen. Refined COD transform formulas of bending-type specimens for material fracture toughness testing[J]. China Measurement & Test,2013,39(1)：25-30.
[30] American Society for Testing and Materials. ASTM E1290-09. Standard test methods for crack-tip opening displacement (CTOD) fracture toughness measurement[S]. Philadelphia,PA：American Society for Testing and Materials,2009.
[31] American Society for Testing and Materials. ASTM E1820-99a. Standard test methods for measurement of fracture toughness[S]. Philadelphia,PA：American Society for Testing and Materials,1999.
[32] ERNST H A,PARIS P C,LANDES J D. Estimations on J-integral and tearing modulus T from a single specimen test record[J]. Fracture Mechanics,ASTM STP 743,American Society for Testing and Materials,1981：476-502.
[33] ERNST H A,PARIS P C,ROSSOW M,et al. Analysis of load-displacement relationships to determine J-R curve and tearing instability material properties[J]. Fracture Mechanics,ASTM STP 677,American Society for Testing and Materials,1979：581-599.
[34] HERRERA R,LANDES J D. A direct J-R curve analysis of fracture toughness tests[J]. Journal of Test and Evaluation,1988,16(5)：427-449.
[35] LANDES J D,HERRERA R. A new look at J-R curve analysis[J]. International Journal of Fracture,1988,36：9-14.
[36] WAINSTAIN J,VEDIA L A,CASSANELLI A N. A study to estimate crack length using the separability parameter Spb in steels[J]. Engineering Fracture Mechanics,2003,70：2489-2496.
[37] WAINSTAIN J,FRONTINI P M,CASSANELLI A N. J-R curve determination using the load separation parameter Spb method for ductile polymers[J]. Polymer Test,2004,23：591-598.
[38] SALAZAR A,RODRIGUEZ J. The use of the load separation parameter Spb method to determine the J-R curves of polypropylenes [J]. Polymer Test,2008,27：1-8.
[39] ZHU X K,LAM P S,CHAO Y J. Application of normalization method to fracture resistance testing for storage tank A285 carbon steel[J]. International Journal of Pressure Vessel Pip,2009,86：669-676.
[40] CASSANELLI A N,ORTIZ H,WAINSTEIN J E,et al. Separability property and load normalization in AA 6061-T6 aluminum alloy[J]. Fatigue and Fracture Mechanics,ASTM STP 1406,American Society for Testing and Materials,2001：49-72.
[41] BALDI F,RICCO T. High-rate J-testing of toughened polyamide 6/6：Applicability of the load separation criterion and the normalization method[J]. Engineering Fracture Mechanics,2005,72：2218-2231.
[42] VARADARAJAN R,DAPP E K,RIMNAC C M. Static fracture resistance of ultra high molecular weight polyethylene using the single specimen normalization method[J]. Ploymer Test,2008,27：260-268.
[43] MORHAIN C,VELASCO J I. Determination of J-R curve of polypropylene copolymers using the normalization method[J]. Journal of Material Science,2001,36：1487-1499.
[44] DZUGAN J,VIEHRIG H W. Application of the normalization method for the determination of J-R curves[J]. Material Science Engineering,2004,A387-389：307-311.
[45] ZHU X K,JOYCE J A. J-resistance curve testing of HY80 steel using SE(B) specimens and normalization method[J]. Engineering Fracture Mechanics,2007,74：2263-2281.
[46] CHRISTOPHER D W,PRABHU M. Plastic J-integral calculations using the load separation method for the center cracked tension specimen[J]. Engineering Fracture Mechanics,2002,69：887-898.
[47] CHRISTOPHER D W,PRABHU M. Plastic J-integral calculations using the load separation method for the double edge notch tension specimen[J]. Engineering Fracture Mechanics,2008,75(18)：5177-5186.
[48] SCIBETTA M,LUCON E,SCHUURMANS J,et al. Numerical simulations to support the normalization data reduction technique[J]. Engineering Fracture Mechanics,2006,73：524-534.
[49] BAO Chen,CAI Lixun. Estimation of J-resistance curve for Cr2Ni2MoV steel using the modified load separation parameter Spb method[J]. Journal of Zhejiang University-SCIENCE A：Applied Physics & Engineering,2010,11(10)：782-788.
[50] 包陈,蔡力勋,石凯凯. 无量纲载荷分离法在延性断裂韧性测定中的应用[J]. 固体力学学报,2013,34(1)：20-30.
BAO Chen,CAI Lixun,SHI Kaikai. Application of nondimensional load separation method in the ductile fracture toughness estimation[J]. Chinese Journal of Solid Mechanics,2013,34(1)：20-30.
[51] 蔡力勋,包陈. 用于延性断裂韧性测试的载荷分离方法与应用[J]. 北京科技大学学报,2011,33(7)：868-875.
CAI Lixun,BAO Chen. Load separation method used to determine ductile fracture toughness of materials and its application[J]. Journal of University of Science and Technology Beijing,2011,33(7)：868-875.
[52] BAO Chen,CAI Lixun. Investigation on Spb method based on nondimensional load separation principle for SEB and CT specimens[J]. Applied Mechanics and Materials,2012,117-119：480-488.
[53] BAO Chen,CAI Lixun,SHI Kaikai. Improved normalization method for ductile fracture toughness determination based on dimensionless load separation principle[J]. Acta Mechanica Solida Sinica,2015,28(2)：168-181.
[54] 武晓勇. 国产A508-3钢中子辐照脆化效应研究[D]. 成都：四川大学,2005.
WU Xiaoyong. Effect of neutron irradiation on brittlement for national A508-3 steel[D]. Chengdu：Sichuan University,2005.
[55] 贾琦. 异型试样疲劳与断裂性能测试方法研究与应用[D]. 成都：西南交通大学,2011.
JIA Qi. Research and application of fatigue and fracture properties test method of non-conventional samples[D]. Chengdu：Southwest Jiaotong University,2011.
Options
文章导航

/

〈 〉

版权所有 © 《机械工程学报》编辑部

技术支持：北京玛格泰克科技发展有限公司