机械工程学报 >

2018 , Vol. 54 >Issue 15: 41 - 51,59

DOI: https://doi.org/10.3901/JME.2018.15.041

机构学及机器人

基于变胞机构的性能可变机械臂研制

  • 荣誉 ,
  • 曲梦可
展开
  • 1. 河北科技师范学院机电工程学院 秦皇岛 066000;
    2. 中信戴卡股份有限公司工程技术研究院 秦皇岛 066000

收稿日期: 2017-10-24

  修回日期: 2017-12-21

  网络出版日期: 2018-08-05

基金资助

国家科技支撑计划（2015BAI06B01）、河北省高等学校科学技术研究青年基金（QN2015185）、秦皇岛市科技计划（201703A003）和河北科技师范学院博士启动基金（2015YB004）资助项目。

收起

Design of Manipulator with Variable Performances Based on Metamorphic Mechanism

  • RONG Yu ,
  • QU Mengke
Expand
  • 1. College of Mechanical and Electrical Engineering, Hebei Normal University of Science and Technology, Qinhuangdao 066000;
    2. Engineering and Technology Research Institute, CiTiC Dicastal Wheel Manufacturing Co., Ltd., Qinhuangdao 066000

Received date: 2017-10-24

  Revised date: 2017-12-21

  Online published: 2018-08-05

Fold

摘要

为研制一种用于铝合金铸件打磨、抛光的机械臂，将3-UPS机构作为初始构型，通过定义运动灵活性和静力承载能力评价指标，揭示出3-UPS机构的尺寸参数与其运动学、静力学评价指标之间的关系，表明：随着尺寸参数的取值变化，3-UPS机构的运动灵活性和静力承载能力变化规律相反，如果要追求其中一种性能，就必然导致另一种性能降低。为了使机械臂的构型、最优机构学性能可以根据不同工况而实时改变，在3-UPS机构每个分支与固定平台之间增加1个移动驱动副，提出一种基于3-PUPS机构的超冗余机械臂，该机械臂可以通过对各分支电动机抱闸锁定的组合实现变胞而得到31种新构型，当其处于3-UPS构型时还可以通过改变固定平台万向副分布半径数值，实时选择性调整运动灵活性最好、或静力承载能力最强。对超冗余3-PUPS机构进行了运动学和静力学建模与分析，揭示了其运动灵活性和静力学传递性能的分布规律。结合打磨、抛光工艺制定出机械臂在不同工况的变胞规则、变尺寸规则，实现了机械臂在不同工况具有不同的自由度状态和最优性能。研制出超冗余机械臂的试验样机，通过一套综合试验系统验证了其变胞构型的可实现性，并测量出其处于3-UPS构型时的定位误差，试验表明：机械臂的运动平台的位置误差均小于0.4 mm，姿态误差均小于0.45°，基本达到了通用式工业机器人的精度水平。

关键词： 冗余; 变胞; 并联机械臂; 试验样机

本文引用格式

荣誉 , 曲梦可 . 基于变胞机构的性能可变机械臂研制[J]. 机械工程学报, 2018 , 54(15) : 41 -51,59 . DOI: 10.3901/JME.2018.15.041

Abstract

In order to develop a manipulator for aluminum alloy castings' grinding and polishing, 3-UPS mechanism is selected as the initial mechanism. Its kinematic and static evaluation indexes are established, and the relationship between 3-UPS mechanism's parameters and its kinematic and static evaluation indexes is revealed. Relationship shows:with the change of 3-UPS mechanism's parameters, the kinematic flexibility and the static load capacity change in the opposite directions. Therefore, if one of the performances is chosen as optimal, it will inevitably lead to the other performance degradation. In order to make the manipulator's configuration and the optimal mechanism performance can be changed in real time according to different working conditions, a mobile driving joint is added between 3-UPS mechanism's each branch and its fixed platform. A hyper-redundant manipulator based on 3-PUPS mechanism is proposed. It can achieve 31 new configurations through the combination lock on the motor brake. Its kinematic flexibility, or static load capacity, can be chosen as optimal performance, by changing the universal joints' distribution radius of the fixed platform. Then, the hyper-redundant manipulator's metamorphic and variable dimensions for different working conditions are formulated based on grinding and polishing processes. Finally, the hyper-redundant metamorphic parallel manipulator's experimental prototype is manufactured, and its metamorphic ability is proved to be possible by experiment. Experiments show that the position error of the manipulator's moving platform is less than 0.4 mm, and the attitude error is less than 0.45°. The manipulator's precision has reached the level of general industrial robot.

Key words： redundant; metamorphic; parallel manipulator; experimental prototype

参考文献

[1] 熊有伦. 智能制造[J]. 科技导报,2013,31(10):1-3. XIONG Youlun. Intelligent manufacturing[J]. Science and Technology Review,2013,31(10):1-3.
[2] 蔡鹤皋. 对我国机器人产业发展的思考[J]. 集成技术,2015,4(5):1-4. CAI Hegao. Thinking about the development of robot industry in China[J]. Integration Technology,2015,4(5):1-4.
[3] 黄田,陈闯,王辉. 一种新型并联动力头动力学参数辨识方法研究[J]. 机械工程学报,2013,49(19):31-39. HUANG Tian,CHEN Chuang,WANG Hui. Identification of dynamic parameters of a novel 3-DOF spindle head[J]. Journal of Mechanical Engineering,2013,49(19):31-39.
[4] SONG Jianfeng,YAO Yingxue. Material removal model considering influence of curvature radius in bonnet polishing convex surface[J]. Chinese Journal of Mechanical Engineering,2015,28(6):1109-1116.
[5] 刘斐,王伟,王雷,等. 接触轮变形对机器人砂带磨削深度的影响[J]. 机械工程学报,2017,53(5):87-93. LIU Fei,WANG Wei,WANG Lei,et al. Effect of contact wheel's deformation on cutting depth for robotic belt grinding[J]. Journal of Mechanical Engineering,2017,53(5):87-93.
[6] 刘建春,陈雄风,廖妮兰. 小型异构件抛光机运动系统分析[J]. 中国机械工程,2016,27(16):1039-1052. LIU Jianchun,CHEN Xiongfeng,LIAO Nilan. Motion system analysis of small heterogeneous parts polishing machine[J]. China Mechanical Engineering,2016,27(16):1039-1052.
[7] ZHA Jun,WANG Zhiwei,XUE Fei. Effect of working position on vertical motion straightness of open hydrostatic guideways in grinding machine[J]. Chinese Journal of Mechanical Engineering,2017,30(1):46-52.
[8] 张治民,张星,王强. 重型车辆传动行动构件轻量化设计研究[J]. 机械工程学报,2012,48(18):67-71. ZHANG Zhimin,ZHANG Xing,WANG Qiang. Research on lightweight design of heavy vehicle transmission and action components[J]. Journal of Mechanical Engineering,2012,48(18):67-71.
[9] 尹咸. 整体螺旋桨机器人砂带磨削加工工艺技术及试验研究[D]. 重庆:重庆大学,2015. YIN Xian. Research on technology and control scheme of robotic abrasive belt polishing for integrated propeller[D]. Chongqing:Chongqing University,2015.
[10] 刘星. 铝合金轮毂局部难加工表面砂带抛磨方法研究[D]. 武汉:华中科技大学,2009. LIU Xing. Research on a method of belt-polishing for partial hard-to-polish surface of al-alloy wheel[D]. Wuhan:Huazhong University of Science and Technology,2009.
[11] 崔宝军. 新型上海大众轮毂制造工艺优化及实践[D]. 秦皇岛:燕山大学,2015. CUI Baojun. New manufacturing process optimization and practice for hub of shanghai volkswagen[D]. Qinhuangdao:Yanshan University,2015.
[12] 杨仲升,黄云,邹莱. 铝合金轮毂机器人光整加工控制技术研究[J]. 中国机械工程,2016,27(14):1857-1862. YANG Zhongsheng,HUANG Yun,ZOU Lai. Analysis of gas flow mechanism and pressure characteristics between plates in micro scale[J]. China Mechanical Engineering,2016,27(14):1857-1862.
[13] 赵菀. 汽车轮毂数控抛光机床的设计与研究[D]. 武汉:华中科技大学,2014. ZHAO Yuan. Research and design for NC polishing machine of vehicle wheels[D]. Wuhan:Huazhong University of Science and Technology,2014.
[14] 王旭. 五轴数控抛光机CAM技术研究[D]. 秦皇岛:燕山大学,2011. WANG Xu. Researching of five-axis Nc polishing machining CAM[D]. Qinhuangdao:Yanshan University,2011.
[15] 陈义. 铝轮毂曲面成套机械抛光技术研究[D]. 武汉:华中科技大学,2010. CHEN Yi. Research on complete of mechanical polishing technology for aluminum wheel hub surface[D]. Wuhan:Huazhong University of Science and Technology,2010.
[16] 余皡. 铝合金汽车轮毂的机械化学抛光方法研究[D]. 武汉:华中科技大学,2009. YU Hao. Automotive Al-wheel mechanical-chemical polishing research[D]. Wuhan:Huazhong University of Science and Technology,2009.
[17] 景胜春. 铝及铝镁合金轮毂的抛磨工艺及其数字化实现[D]. 武汉:华中科技大学,2007. JING Chunsheng. Polishing technical process of the aluminum-magnesium alloy motor wheel and its digital realization[D]. Wuhan:Huazhong University of Science and Technology,2007.
[18] 李研彪,金振林,计时鸣. 一种新型3-DOF串并混联拟人机械臂的研制[J]. 中国科学E辑,2009,39(12):1983-1991. LI Yanbiao,JIN Zhenlin,JI Shiming. Design of a novel 3-DOF hybrid manipulator[J]. Science in China,Ser. E,2009,52(12):3592-3600.
[19] 黄田,李亚,李思维. 一种三自由度并联机构几何误差建模、灵敏度分析及装配工艺设计[J]. 中国科学E辑,2002,32(5):628-635. HUANG Tian,LI Ya,LI Siwei. Criteria for conceptual design of reconfigurable PKM modules theory and application[J]. Science in China,Ser. E,2002,32(5):628-635.
[20] 刘海涛,黄田. 5自由度大工作空间/支链行程比混联机械手的概念设计与尺度综合[J]. 机械工程学报,2007,43(6):14-20. LIU Haitao,HUANG Tian. Kinematic design of 5-DOF hybrid robot with large workspace/limb stroke ratio[J]. Chinese Journal of Mechanical Engineering,2007,43(6):14-20.
[21] 李彬,黄田,刘海涛. Exechon混联机器人的三自由度并联机构模块位置分析[J]. 中国机械工程,2010,21(11):2785-2789. LI Bin,HUANG Tian,LIU Haitao. Position analysis of a 3-DOF PKM module for a 5-DOF hybrid robot Exechon[J]. China Mechanical Engineering,2010,21(11):2785-2789.
[22] 李曚. 可重构混联机械手模块TriVariant的设计理论与方法[D]. 天津:天津大学,2005. LI Meng. Design theory and methodology of the Trivariant a 5-DOF reconfigurable PKM module[D]. Tianjin:Tianjin University,2005.
[23] 刘海涛. 少自由度机器人机构一体化建模理论、方法及工程应用[D]. 天津:天津大学,2010. LIU Haitao. Unified parameter modeling of lower mobility robotic manipulators:Theory,methodology and application[D]. Tianjin:Tianjin University,2010.
[24] 李研彪. 新型6-DOF串并混联拟人机械臂的性能分析与设计[D]. 秦皇岛:燕山大学,2009. LI Yanbiao. Analysis and design of a novel 6-DOF hybrid cechanical arm[D]. Qinhuangdao:Yanshan University,2009.
[25] 金振林,曹舜,高峰. 新型机器人肩关节及其运动学分析[J]. 中国机械工程,2009,20(14):1639-1642. JIN Zhenlin,CAO Shun,GAO Feng. Arc spline tool path generation for triangular mesh surface machining[J]. China Mechanical Engineering,2009,20(14):1639-1642.
[26] 李研彪,金振林,计时鸣. 一种并联结构拟人肩关节的误差分析[J]. 应用基础与工程科学学报,2009,17(3):446-451. LI Yanbiao,JIN Zhenlin,JI Shiming. Error analysis of a parallel anthropopathic shoulder[J]. Journal of Basic Science and Engineering,2009,17(3):446-451.
[27] 秦利. 考虑重力效应的空间机器人系统建模与控制研究[D]. 秦皇岛:燕山大学,2014. QIN Li. Research on modeling and control for space robot system with gravity effect consideration[D]. Qinhuangdao:Yanshan University,2014.
[28] 王跃灵,金振林,李研彪. 球面3-RRR并联机构动力学建模与鲁棒-自适应迭代学习控制[J]. 机械工程学报,2010,46(1):68-73. WANG Yueling,JIN Zhenlin,LI Yanbiao. Dynamic modeling and robust-adaptive iterative learning control of 3-RRR spherical parallel mechanism[J]. Journal of Mechanical Engineering,2010,46(1):68-73.
[29] HAO F,MERLET J P. Multi-criteria optimal design of parallel manipulators based on interval analysis[J]. Mechanism and Machine Theory,2005,40(2):157-171.
[30] TSAIL W. Solving the inverse dynamics of a stewart-gough manipulator by the principle of virtual work[J]. ASME Journal of Mechanical Design,2000(122):3-9.
[31] SAMAK S M,GUPTA K C. Parametric uncertainty on manipulators dynamics[J]. Mechanism and Machine Theory,1998,33(7):945-956.
[32] 黄真,赵永生,赵铁石. 高等空间机构学[M]. 北京:高等教育出版社,2006. HUANG Zhen,ZHAO Yongsheng,ZHAO Tieshi. Advanced spatial mechanism[M]. Beijing:Higher Education Press,2006.
[33] 曾达幸,黄真. 基于螺旋理论的转动解耦并联机构型综合[J]. 中国科学E辑,2011,41(5):585-591. ZENG Daxing,HUANG Zhen. Type synthesis of the rotational decoupled parallel mechanism based on screw theory[J]. Science in China,Ser. E,2011,41(5):585-591. 通信作者:荣誉,男,1981年出生,博士,副教授。主要研究方向为新构型工业机器人。E-mail:lixiangcg@126.com
Options
文章导航

/

〈 〉

版权所有 © 《机械工程学报》编辑部

技术支持：北京玛格泰克科技发展有限公司