运载工程

高速车轮非圆化磨耗对轴箱端盖异常振动影响初探

  • 刘佳 ,
  • 韩健 ,
  • 肖新标 ,
  • 刘晓龙 ,
  • 金学松 ,
  • 王鹏
展开
  • 1. 西南交通大学牵引动力国家重点实验室 成都 610031;
    2. 核反应堆系统设计技术重点实验室 成都 610213
刘佳,女,1992年出生.主要研究方向为振动噪声控制.E-mail:15281066876@163.com

收稿日期: 2016-09-26

  修回日期: 2017-04-19

  网络出版日期: 2017-10-20

基金资助

国家重点基础研究发展计划(973计划,2011CB711103)和国家自然科学基金(U1134202,U1434201,51475390)资助项目。

Influence of Wheel Non-circular Wear on Axle Box Cover Abnormal Vibration in High-speed Train

  • LIU Jia ,
  • HAN Jian ,
  • XIAO Xinbiao ,
  • LIU Xiaolong ,
  • JIN Xuesong ,
  • WANG Peng
Expand
  • 1. State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031;
    2. Science and Technology on Reactor System Design Technology Laboratory, Chengdu 610213

Received date: 2016-09-26

  Revised date: 2017-04-19

  Online published: 2017-10-20

摘要

国内现有某高速列车在运营一段时间后,轴箱端盖的连接螺栓经常发生松动现象。为寻找轴箱端盖螺栓松动的原因,分别对车轮表面磨耗状态及列车关键部件振动特性进行测试,系统地分析轴箱显著频率振动与车轮非圆化磨耗之间的相关性;根据车轮多边形及关键部件的振动特征,对轴箱端盖和一系减振器进行模态测试,对轮对和构架进行有限元模态分析,并通过观察轴箱振动显著频段内轴箱端盖变形,初步分析了轴箱端盖螺栓易松动的原因。结论如下:轴箱振动能量主要集中在314~372 Hz和514~600 Hz的频率范围内,该频率段分别对应车轮的11~13阶多边形磨耗和18~21阶多边形磨耗产生的激励频率范围。轴箱在314~372 Hz的振动显著频率与减振器在221~436 Hz的固有模态群相互耦合,轮对和构架在514~600 Hz的固有模态群相互耦合,这两种模态耦合关系是导致轴箱端盖异常振动,后期发展为螺栓松动的主要原因。

本文引用格式

刘佳 , 韩健 , 肖新标 , 刘晓龙 , 金学松 , 王鹏 . 高速车轮非圆化磨耗对轴箱端盖异常振动影响初探[J]. 机械工程学报, 2017 , 53(20) : 98 -105 . DOI: 10.3901/JME.2017.20.098

Abstract

After a certain period of operation of a high-speed train, the bolts of the axle box cover of the train get loosened. To analyze the problem, the wheel wear status and the key components of the bogie vibration are monitored focusing on the relationship between the abnormal vibration of axle box and non-circular wear of the wheels. Meanwhile, the modes of the axle box cover and the primary damper are measured, the modes of the wheelset and the bogie frame are calculated by using finite element method, the deformation shapes of the axle box cover are analyzed in the frequencies which axle box vibrate evidently. The causes of the loosening of these bolts are discussed. The results of the tests show that vibrations in the axle box are concentrated in the 314-372 Hz range and the 514-600 Hz range, which respectively correspond to the 11th to 13th polygonal wear of the wheel and to the 18th to 21th polygonal wear of the wheel. The 314-372 Hz range is close to the natural frequency of the primary damper, which falls in the 221-436 Hz range. The 514-600 Hz range is also close to the natural frequency of the bogie frame and wheelset. These two cases are the main causes of the abnormal vibration of the axle box cover of a high-speed train, which in turn leads to bolts loosening.

参考文献

[1] 陈光雄,金学松,邬平波,等. 车轮多边形磨耗 机理的有限元研究[J]. 铁道学报,2011,33(1):14-18. CHEN Guangxiong,JIN Xuesong,WU Pingbo,et al. Finite element study on the generation mechanism of polygonal wear of railway wheels[J]. Journal of the China Railway Society,2011,33(1):14-18.
[2] JOHANSSON A,NIELSEN J C O. Out-of-round railway wheels-wheel-rail contact forces and track response derived from field tests and numerical simulations[J]. Proceedings of Institution of Mechanical Engineers,Part F:Journal of Rail and Rapid Transit,2003,217(2):135-146.
[3] MORYS B. Enlargement of out-of-round wheel profiles on high speed trains[J]. Journal of Sound and Vibration,1999,227(5):965-978.
[4] JOHANSSON A,ANDERSSON C. Out-of-round railway wheels—a study of wheel polygonalization through simulation of three-dimensional wheel–rail interaction and wear[J]. Vehicle System Dynamics,2005,43(8):539-559.
[5] CLAUS H,SCHIEHLEN W. System dynamics of railcars with radial-and lateralelastic wheels[M]. Berlin and Heidelberg:Springer-verlag,2003.
[6] CLAUS H,SCHIEHLEN W. KRUSE. Dynamic stability and random vibrations of rigid and elastic wheelsets[J]. Nonlinear Dynamics,2004,36(4):299-311.
[7] JIN Xuesong,WU Lei,FANG Jianying,et al. An investigation into the mechanism of the polygonal wear of metro train wheels and its effect on the dynamic behavior of a wheel/rail system[J]. Vehicle System Dynamics,2012,50(12):1817-1834.
[8] 李伟,李言义,张雄飞,等. 地铁车辆车轮多边形的机理分析[J]. 机械工程学报,2012,49(18):17-22. LI Wei,LI Yanyi,ZHANG Xiongfei,et al. Mechanism of the polygonal wear of metro train wheels[J]. Journal of Mechanical Engineering,2013,49(18):17-22.
[9] 韩光旭,张捷,肖新标,等. 高速动车组车内异常振动噪声特性与车轮非圆化关系研究[J]. 机械工程学报,2014,50(22):113-121. HAN Guangxu,ZHANG Jie,XIAO Xinbiao,et al. Study on high-speed train abnormal interior vibration and noise related to wheel roughness[J]. Journal of Mechanical Engineering,2014,50(22):113-121.
[10] ZHANG Jie,HAN Guangxu,XIAO Xinbiao,et al. Influence of wheel polygonal wear on interior noise of high-speedtrains[J]. Zhejiang University-Science,2014,15(12):1002-1018.
[11] SHIH C Y,TSUEI Y G,ALLEMANG R J,et al. A frequency domain global parameter estimation method for multiple reference frequency response measurements[J]. Mechanical Systems and Signal Processing,1988,2(4):349-365.
[12] SHIH C Y,TSUEI Y G,ALLEMANG R J,et al. Complex mode indication function and its applications to spatial domain parameter estimation[J]. Mechanical System and Signal Processing,1988,2(4):367-377.
[13] 吴吉平. 多输入多输出频域正交多项式模态参数识别方法[D]. 长沙:中南大学,2009. WU Jiping. The modal parameter identification of multi-input multi-output orthogonal polynomial method[D]. Changsha:Changsha Central South University,2009.
文章导航

/