双爪式爬杆机器人的夹持性能分析

江 励,管贻生,周雪峰,杨铁牛,苏满佳,吴鸿敏

doi:10.3901/JME.2016.03.034

机械工程学报 >

2016 , Vol. 52 >Issue 3: 34 - 40

DOI: https://doi.org/10.3901/JME.2016.03.034

机构学及机器人

双爪式爬杆机器人的夹持性能分析

展开

1. 五邑大学机电工程学院江门 529000；
2. 广东工业大学机电工程学院广州 510006；
3.广东省自动化研究所现代控制技术重点实验室广州 510075

江励，男，1984年出生，博士，讲师。主要研究方向为仿生机器人。 E-mail：jl198412516@163.com

收稿日期: 2015-02-26

修回日期: 2015-10-28

网络出版日期: 2016-02-05

基金资助

广东省自然科学基金(S2013020012797)、国家基金委-广东省联合基金(U1401240)和国家国际科技合作专项(2015DFA11700)资助项目

收起

Grasping Performance Analysis of a Biped-pole-climbing Robot

Expand

1. School of Mechanical Engineering, Wuyi University, Jiangmen 529000：
2. School of Mechanical Engineering, Guangdong University of Technology, Guangzhou 510006;
3. Key Laboratory of Modern Control Technology, Guangdong Institute of Automation, Guangzhou 510075

Received date: 2015-02-26

Revised date: 2015-10-28

Online published: 2016-02-05

Fold

摘要

双爪式攀爬机器人已成为一类重要的和主流的攀爬机器人，这类机器人中两端手爪对攀爬对象抓夹的安全性和可靠性是攀爬的前提条件和基本要求，也是一个关键问题。基于此，在介绍自行开发的双爪式爬杆机器人Climbot之后提出这类机器人抓夹圆杆时的夹持力封闭性问题，对封闭性进行论证。分别分析机器人进行平面攀爬和空间攀爬时对支撑端夹持器产生的负载形式，建立其力平衡模型。基于该模型，计算夹持器的各种尺寸参数对夹持性能的影响，并对计算结果进行系统的分析。通过几组攀爬夹持试验对提出的夹持模型进行验证。结果对夹持器的设计和攀爬安全性的保证具有重要的参考和指导意义。

关键词： 爬杆机器人; 抓夹安全性; 夹持力封闭; 力平衡模型; 夹持器设计

本文引用格式

江励,管贻生,周雪峰,杨铁牛,苏满佳,吴鸿敏 . 双爪式爬杆机器人的夹持性能分析[J]. 机械工程学报, 2016 , 52(3) : 34 -40 . DOI: 10.3901/JME.2016.03.034

Abstract

Biped climbing robots have become an important class of climbing robots, where the reliability of pole-grasping with the end grippers is a basic and critical requirement for safe climbing, and the analysis of grasping reliability is a key issue. A biped pole-climbing robot, the Climbot developed is first introduced. The problem of force-closure of grasping with the robot climbing on a round pole is presented and proved. The dynamic loads generated onto the base gripper when the robot climbs in different climbing gaits are analyzed, and the balance models are proposed, respectively, in 2D and 3D cases. Based on these models, the effect of geometric parameters of the gripper on grasping performance is analyzed. The correctness of the models and effectiveness of the corresponding analysis are verified with several grasping experiments. The results are helpful and valuable to gripper design for biped climbing robots and guarantee of grasp reliability.

Key words： biped pole-climbing robot; grasping safety; force-closure; force balance model; gripper design

参考文献

[1] ALMONACID M，SALTAREN R J，ARACIL R，et al. Motion planning of a climbing parallel robot[J]. IEEE Transactions on Robotics and Automation，2003，19(3)：485-489.
[2] BAGHANI A，AHMADABADI M，HARATI A. Kinematics modeling of a wheel-based pole climbing robot (ut-pcr)[C]// In Proc. IEEE International Conference on Robotics and Automation，Kobe，Japan：IEEE，2005：2111-2116.
[3] SPENKO M J. Biologically inspired climbing with a hexapedal robot[J]. Journal of Field Robotics，2008，25(4-5)：223-242.
[4] LAM T L，XU Y. Climbing strategy for a flexible tree climbing robot—Treebot[J]. IEEE Trasactions on Robotics，2011，26(4)：12-23.
[5] TAVAKOLI M，MARQUES L，ALMEIDA T D. 3DClimber：Climbing and manipulation over 3D structures[J]. The Journal of Mechatronics，2010，21：48-62.
[6] 江励，管贻生，蔡传武，等. 仿生攀爬机器人的步态分析[J]. 机械工程学报，2010，46(15)：17-22. JIANG Li，GUAN Yisheng，CAI Chuanwu，et al. Gait analysis of a novel biomimetic climbing robots[J]. Journal of Mechanical Engineering，2010，46(15)：17-22.
[7] NGUYEN V D. Constructing force-closure grasps[J]. International Journal of Robotics Research，1988，7(3)：3-16.
[8] TRINKLE J C. On the stability and instantaneous velocity of grasped frictlonless objects[J]. IEEE Transactions on Robotics and Automation，1992，8(5)：560-572.
[9] RICHARD M M，ZEXIANG. L，SASTRY S S. A mathematical introduction to robotic manipulation[M]. Florida：CRC Press，1994.
[10] GOLDMAN A J，TUCKER A W. Polyhedral convex cones in linear inequality and related systems[M]. Princeton：Princeton Univ. Press，1956.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献