机械工程学报 >

2018 , Vol. 54 >Issue 10: 117 - 123

DOI: https://doi.org/10.3901/JME.2018.10.117

材料科学与工程

缺口件p-S-N曲线的随机有限元法与试验应用

  • 金甲 ,
  • 张书明 ,
  • 李五一 ,
  • 薛卫军
展开
  • 北京飞机强度研究所飞机力学与载荷实验室 北京 100083
金甲,男,1991年出生,工程师。主要研究方向为疲劳可靠性。E-mail:615427096@qq.com

收稿日期: 2017-06-12

  修回日期: 2018-01-22

  网络出版日期: 2018-05-20

基金资助

国家自然科学基金资助项目（50135010）。

收起

SFEM for p-S-N Curve of Notched Specimens and Test Application

  • JIN Jia ,
  • ZHANG Shuming ,
  • LI Wuyi ,
  • XUE Weijun
Expand
  • Lab of Aircraft Mechanics and Loads, Beijing Aircraft Strength Institution, Beijing 100083

Received date: 2017-06-12

  Revised date: 2018-01-22

  Online published: 2018-05-20

Fold

摘要

p-S-N曲线是结构疲劳可靠性分析的重要依据之一，获取最可靠的p-S-N曲线的方法是基于试验数据。由于耗时长，缺口形式多变等原因，缺口件p-S-N曲线往往难以全部通过试验获得。使用随机有限元法（stochastic finite element method，SFEM）计算疲劳寿命与疲劳强度得到了一定研究，但参数常常比较复杂。考虑光滑件p-S-N曲线和缺口几何参数，使用随机有限元法模拟缺口分散性，与表示光滑件疲劳寿命分散性的p-S-N曲线结合起来，通过蒙特卡洛抽样得到相应的局部应力应变的随机样本，获取了缺口件的p-S-N曲线，并将其用于疲劳可靠性研究的一部分，低载删除的试验研究。试验表明该方法可行，可以用于缺口件p-S-N曲线的拟合折算。

关键词： 缺口件; p-S-N曲线; 随机有限元; 可靠性; 场强法

本文引用格式

金甲 , 张书明 , 李五一 , 薛卫军 . 缺口件p-S-N曲线的随机有限元法与试验应用[J]. 机械工程学报, 2018 , 54(10) : 117 -123 . DOI: 10.3901/JME.2018.10.117

Abstract

The p-S-N curve is one of the most important basis of fatigue reliability analysis, and the test approach is the most reliable method to obtain p-S-N curve. Due to the long time, the variety of the notch form and other reasons, the p-S-N curve of notched specimens is often difficult to get by means of test. Calculating the fatigue life and fatigue strength is studied by using the stochastic finite element method(SFEM), but the parameters are often complex. Considering the p-S-N curve of smooth specimens and the notch geometry parameters, Dispersion of stress and strain caused by notch dispersion is combined with the p-S-N curve that indicate fatigue life dispersion by stochastic finite element method. The p-S-N curve of the notched specimens is obtained by Monte Carlo sampling, and is used for part of the study of fatigue reliability, experimental study on small load omitting. The experimental results show that the approach is feasible and can be used to fit the p-S-N curve of notched specimens.

Key words： notched specimens; p-S-N curve; stochastic finite element method; reliability; field strength method

参考文献

[1] 刘德昆, 李强, 王曦, 等. 动车组轴箱轴承基于实测载荷的寿命预测方法[J]. 机械工程学报, 2016, 52(22):45-54. LIU Dekun, LI Qiang, WANG Xi, et al. Life prediction method for EMU axle box bearings based on actual measured loadings[J]. Journal of Mechanical Engineering, 2016, 52(22):45-54.
[2] 夏天翔. 考虑材料分散性后Miner理论在多轴两级阶梯谱下的适用性研究[J]. 机械工程学报, 2015, 51(14):38-45. XIA Tianxiang. Study on the applicability of Miner's law under multiaxial 2-stage step loading spectra with consideration of material dispersion[J]. Journal of Mechanical Engineering,2015,51(14):38-45.
[3] 薛鸿祥, 唐文勇, 张圣坤. 建立海洋平台管节点p-S-N曲线的模糊统计方法[J]. 上海交通大学学报, 2006, 40(8):1339-1342, 1347. XUE Hongxiang, TANG Wenyong, ZHANG Shengkun. Fuzzy statistical method for establishing p-S-N curves of tubular joints of offshore platform[J]. Journal of Shanghai Jiaotong University, 2006, 40(8):1339-1342, 1347.
[4] 张家新, 王自力, 朱安庆. 建立船体结构疲劳设计曲线的贝叶斯方法[J]. 华东船舶工业学院学报, 2000, 14(6):1-4. ZHANG Jiaxin, WANG Zili, ZHU Anqing. Bayesian method for establishing fatigue design curves of ship structures[J]. Journal of East China Shipbuilding Institute, 2000, 14(6):1-4.
[5] JING L, JWO P. A maximum likelihood method for estimating P-S-N curves[J]. International Journal of Fatigue, 1997, 19(5):415-419.
[6] 苏彦江. 寿命服从Weibull分布时求P-S-N曲线的极大似然法[J]. 兰州铁道学院学报, 2002, 21(3):6-8. SU Yanjiang. The likelihood method for getting the p-S-N curve when fatigue life follow Weibull distribution[J]. Journal of Lanzhou Railway Institute, 2002, 21(3):6-8.
[7] JI F X, YAO W X. Weighted least square method for S-N curve fitting[J]. Transactions of Nanjing University of Aeronautics & Astronautics, 2004, 21(1):53-57.
[8] 李洪双, 吕震宙. 估计疲劳寿命三参数P-S-N曲线的新方法[J]. 机械强度, 2007, 29(2):300-304. LI Hongshuang, LÜ Zhenzhou. New method for estimating fatigue life three-paraneter P-S-N curves[J]. Journal of Mechanical Strength, 2007, 29(2):300-304.
[9] 白鑫, 谢里阳, 钱文学. 基于样本集聚原理的疲劳可靠性评估方法及其在零部件上的应用[J]. 机械工程学报, 2016, 52(6):206-212. BAI Xin, XIE Liyang, QIAN Wenxue. Fatigue probability evaluation method based on the principle of sample-polymerization[J]. Journal of Mechanical Engineering, 2016, 52(6):206-212.
[10] 谢里阳, 刘建中. 样本信息聚集原理与P-S-N曲线拟合方法研究[J]. 机械工程学报, 2013, 49(15):96-104. XIE Liyang, LIU Jianzhong. Principle of sample polymerization and method of P-S-N curve fitting[J]. Journal of Mechanical Engineering, 2013, 49(15):96-104.
[11] 谢金标, 姚卫星. 建立P-S-N曲线的双加权最小二乘法[J]. 实验力学, 2010, 25(5):611-616. XIE Jinbiao, YAO Weixing. Double weighted least square method for P-S-N curve regression[J]. Journal of Experimental Mechanics, 2010, 25(5):611-616.
[12] BUCAR T, NAGODE M, FAJDIGA M. An improved neural computing method for describing the scatter of S-N curves[J]. International Journal of Fatigue, 2007, 29:2125-2137.
[13] RAMU P, ARUL S. Estimating probabilistic fatigue of Nitinol with scare samples[J]. International Journal of Fatigue, 2016, 85:31-39.
[14] 李铭, 谢里阳, 张宇, 等. 齿轮的概率寿命预测与弯曲疲劳试验[J]. 机械工程学报, 2017, 53(18):169-175. LI Ming, XIE Liyang, ZHANG Yu, et al. Probabilistic life prediction and bending fatigue test for gear[J]. Journal of Mechanical Engineering, 2017, 53(18):169-175.
[15] 谢里阳, 刘建中, 吴宁祥, 等. 风电装备传动系统及零部件疲劳可靠性评估方法[J]. 机械工程学报, 2014, 50(11):1-8. XIE Liyang, LIU Jianzhong, WU Ningxiang, et al. Fatigue reliability evaluation method for gearbox component and system of wind turbine[J]. Journal of Mechanical Engineering, 2014, 50(11):1-8.
[16] 李应波, 姚卫星. 基于SFEM的结构元件疲劳可靠性分析[J]. 南京航空航天大学学报, 2007, 39(4):461-464. LI Yingbo, YAO Weixing. Fatigue reliability analysis on structural elements based on SFEM[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2007, 39(4):461-464.
[17] 崔海涛, 温卫东. 一种基于SFEM的构件振动疲劳强度可靠性的分析方法[J]. 航空动力学报, 1999, 14(3):323-325. CUI Haitao, WEN Weidong. A SFEM for analyzing reliability of vibrating structural components[J]. Journal of Aerospace Power, 1999, 14(3):323-325.
[18] 靳慧, 王金诺. 等幅载荷下含缺口零件系统的疲劳可靠性[J]. 西南交通大学学报, 2003, 38(3):294-296. JIN Hui, WANG Jinnuo. Fatigue reliability of notched parts from viewpoint of structural system[J]. Journal of Southwest Jiaotong University, 2003, 38(3):294-296.
[19] 王立彬, 靳慧, 徐步青. 概率局部应力应变法[J]. 工程力学, 2003, 20(4):188-191. WANG Libin, JIN Hui, XU Buqing. Probabilistic method for local stress and strain analysis[J]. Engineering Mechanics, 2003, 20(4):188-191.
[20] 奚蔚. 缺口件疲劳寿命分布的敏度分析[J]. 科学技术与工程, 2015, 15(14):97-101. XI Wei. Sensitivity analysis of fatigue life distribution of notched specimen[J]. Science Technology and Engineering, 2015, 15(14):97-101.
[21] KAM TY, TSAI SY, CH KH. Fatigue reliability analysis of composite laminates under spectrum stress[J]. International Journal of Solids & Structures, 1997, 34(12):1441-1461.
[22] KLESNIL M, LUKAS P. Fatigue of metallic materials[M]. Amsterdam:Elsevier Scientific Pubilishing Company, 1980.
[23] BURBACH J. On the physical justification of the term "State of Fatigue of Materials under Cyclic Loading", cyclic stress-strain behavior-analysis, experimentation and failure[S]. ASTM STP 519, 1973:185-212.
[24] 谢里阳. 疲劳损伤状态的等效性[J]. 机械强度, 1995, 17(2):100-104. XIE Liyang. On the equivalence of fatigue damage states[J]. Journal of Mechanical Strength, 1995, 17(2):100-104.
[25] ZHANG Junhong, YANG Shuo, LIN Jiewei. Fatigue crack growth rate of Ti-6Al-4V considering the effects of fracture toughness and crack closure[J]. Chinese Journal of Mechanical Engineering, 2015, 28(2):1-7.
[26] GHANEM R G, SPANOS P D. Soectral stochastic finite element formulation for reliability analysis[J]. Journal of Engineering Mechanics, ASCE, 1991, 117(10):2351-2372.
[27] 奚蔚, 姚卫星. 一种新的缺口件疲劳寿命分布计算模型[J]. 科学技术与工程, 2013, 13(10):2676-2681. XI Wei, YAO Weixing. A new computational model for fatigue life distribution of notched specimen. Science Technology and Engineering[J]. Engineering Mechanics, 2013, 13(10):2676-2681.
[28] 姚卫星. 结构疲劳寿命分析[M]. 北京:国防工业出版社, 2003. YAO Weixing. Fatigue life prediction of structures[M]. Beijing:National Defence Industry Press, 2003.
[29] 翟银秀. 改进疲劳损伤模型与基于P-S-N的疲劳可靠性研究[D]. 长沙:湖南大学, 2014. ZHAI Yinxiu. The research on improved fatigue damage model and fatigue reliability based-on P-S-N curve[D]. Changsha:Hunan University, 2014.
[30] 王东锋, 汪定江, 王新坤. 构件安全疲劳寿命估算中的p-S-N曲线修正[C]//中国航空学会:探索创新交流(第2集):第二届中国航空学会青年科技论坛论文集. 北京:航空工业出版社, 2006:507-513. WANG Dongfeng, WANG Dingjiang, WANG Xinkun. Correction of p-S-N curve in estimating part's safe fatigue life[C]//CSAA:Discovery, innovation and communication- 2nd CSAA science and technique youth forum. Beijing:Aviation Industry Press, 2006:507-513.
[31] 金甲, 姚卫星, 谢飞, 等. 疲劳载荷谱B氏等效与试验验证[J]. 航空科学技术, 2016, 27(7):57-63. JIN Jia, YAO Weixing, XIE Fei, et al. Equivalence of fatigue load spectra based on B-distance with experimental verification[J]. Aeronautical Science & Technology, 2016, 27(7):57-63.
[32] WANG C J, YAO W X XIA T X. A small-load-omitting criterion based on probability fatigue[J]. International Journal of Fatigue, 2014(68):224-230.
[33] 吴学仁. 飞机结构金属材料力学性能手册[M]. 北京:航空工业出版社, 1997. WU Xueren. Mechanical performance manual of metal material for aircraft strcture[M]. Beijing:Aviation Industry Press, 1997.
[34] 姚卫星, 顾怡. 结构可靠性设计[M]. 北京:航空工业出版社, 1997. YAO Weixing, GU Yi. Structure reliability design[M]. Beijing:Aviation Industry Press, 1997.
Options
文章导航

/

〈 〉

版权所有 © 《机械工程学报》编辑部

技术支持：北京玛格泰克科技发展有限公司