将带钢冷轧过程中磨损量仅有微米或亚微米数量级的工作辊表面粗糙峰的轧制磨损,视作一种由更小尺度的微细颗粒质量脱落引起的不连续细观磨损行为,建立工作辊表面局部区域内粗糙峰轧制磨损的离散元仿真模型,模拟研究工作辊表面粗糙峰上质量脱落的变化过程和磨损规律。针对工业生产中使用电火花毛化机床加工制备的实际工作辊表面微观形貌,抽象建立若干种主要工作辊表面粗糙峰几何形状,研究不同几何形态粗糙峰的表面在相同的轧制工况条件下的不同磨损行为和抗磨损性能,仿真结果与工业生产中实测取得的工作表面粗糙峰磨损规律定性一致。研究也表明,模拟工作辊表面粗糙峰的复杂细观磨损问题,离散元方法可能是一种值得关注的方法。
Based on the fact that the wear volume of rolls in cold rolling is caused only by the wear of the asperities in a micron or submicron magnitude, a discontinued mechanism is presented, in which wear is caused by the shedding mass of particles in a smaller scale. A model based on discrete element method (EDM) is established within a localized area of work roll surface, to simulate the mass shedding process of asperities and the laws of wear of work rolls. Aiming at the real surface topography of work rolls, which is created by electrical discharge texturing machines to control the microscopic surface quality of strip, several major shapes of asperities are abstracted used in the model, to study the different wear behavior and wear resistance of different work roll surfaces with different shaped asperities, under the same rolling condition. The simulating result shows great accordance with the wear laws of asperities of work roll surfaces in industry production. It also shows that, discrete element method can be a valued method which worthies concerns and developments to simulate the microscopic wear of asperities of work roll surface.
[1] 郭忠峰,龚殿尧,荆涛. 1700热连轧机CVC轧辊的磨损[J]. 钢铁研究学报,2008,20(1)：21-24.
GUO Zhongfeng,GONG Dianyao, JING Tao. CVC roll wear model for 1700 hot strip mill[J]. Journal of Iron and Steel Research,2008,20(1)：21-24.
[2] 李长生,张晓明,刘相华,等. 轧制过程轧辊磨损数学模型试验研究[J]. 机械工程学报,2002,38(7)：28-30.
LI Changsheng,ZHANG Xiaoming,LIU Xianghua,et al. Experiment investigation of mathematic model on rolls wear in rolling[J]. Chinese Journal of Mechanical Engineering,2002,38(7)：28-30.
[3] 陈金山,李长生,曹勇．轧辊粗糙度对不锈钢板带表面和工艺参数的影响[J]．机械工程学报,2013,49(4)：30-36．
CHEN Jinshan,LI Changsheng,CAO Yong. Effects of roll roughness on surface and process parameters for stainless-steel strip[J]. Journal of Mechanical Engineering,2013,49(4)：30-36.
[4] 吴海淼,董建荣,刘志民. 轧辊磨损数学模型研究[J].润滑与密封,2009,34(8)：54-61．
WU Haimiao,DONG Jianrong,LIU Zhimin. Research on mathematical model of roll wear[J]. Lubrication Engineering,2009,34(8)：54-61.
[5] BOLT P H,BATAZZI D,BELFIORE N P. Damage resistance and roughness retention of work rolls in cold rolling mills[J]. Revue De Metallurgie-Cahiers D Informations Techniques,2010,107(6)：245-255.
[6] SHABANI M O,MAZAHERY A. Modeling of the wear behavior in A356-B4C composites[J]. Journal of Materials Science,2011,46(20)：6700-6708.
[7] WANG Z J,ZHOU Q H. Applying a population growth model to simulate wear of rough surfaces during running-in[J]. Wear,2012,294：356-363.
[8] 薛玉君,程先华,黄文振. 断裂力学和有限元法在疲劳磨损研究中的应用[J]. 机械强度,2001,23(3)：365-368.
XUE Yujun,CHENG Xianhua,HUANG Wenzhen. Applications of fracture mechanics and finite element method in fatigue wear[J]. Journal of Mechanical Strength,2001,23(3)：365-368.
[9] SHIPWAY P H．A mechanical model for particle motion in the micro-scale abrasion wear test[J]. Wear,2004,257(9-10)：984-991.
[10] FANG L,LIU W M,DU D S,et al. Predicting three-body abrasive wear using Monte Carlo methods[J]. Wear,2004,256(7-8)：685-694.
[11] HORA C,VESSELENYI T,DZITAC S,et al. Wear simulation through cellular automata method[C]//3rd International Workshop on Soft Computing Applications,2009,41-46.
[12] TONG J,MOHAMMAD M A,ZHANG J B,et al. DEM numerical simulation of abrasive wear characteristics of a bioinspired ridged surface[J]. Wear,2010,7(2)：175-181.
[13] HANNES D,ALFREDSSON B. A fracture mechanical life prediction method for rolling contact fatigue based on the asperity point load mechanism[J]. Wear,2012,83：62-74.
[14] KRIS D M,FARID A B,HENDRIK V B. A novel energy-based generic wear model at the asperity level[J]. Wear,2011,270(11-12)：760-770.
[15] LEONARD B D,SADEGHI F,SHINDE S,et al. Rough surface and damage mechanics wear modeling using the combined finite-discrete element method[J]. Wear,2013,305(1-2)：312-321.
[16] 姜增辉,王琳琳,石莉,等. 硬质合金刀具切削Ti6Al4V 的磨损机理及特征[J]. 机械工程学报,2014,50(1)：178-184.
JIANG Zenghui,WANG Linlin,SHI Li,et al. Study on tool wear mechanism and characteristics of carbide tools in cutting Ti6Al4V[J]. Journal of Mechanical Engineering,2014,50(1)：178-184.
[17] 张方宇,桂良进,范子杰. 销-盘试验的热-应力-磨损耦合模拟研究[J]. 机械工程学报,2015,51(8)：107-115.
ZHANG Fangyu,GUI Liangjin,FAN Zijie. Study on simulation of coupled heat transfer,stress and wear behavior in pin-on-disc experiments[J]. Journal of Mechanical Engineering,2015,51(8)：107-115.
[18] 温雪龙,巩亚东,程军,等. 电镀金刚石微磨具磨损机理分析与试验研究[J]. 机械工程学报,2015,51(11)：177-185.
WEN Xuelong,GONG Yadong,CHENG Jun,et al. Mechanism analysis and experimental research on wear of electroplated diamond micro-grinding tool[J]. Journal of Mechanical Engineering,2015,51(11)：177-185.
[19] ZHANG R,CGEN G M,FAN W F,et al. Simulation on the wear behavior of the wear-resistant surfaces using discrete element method[C]//2nd International Conference on Manufacturing Science and Engineering,2011：729-733.
[20] 赵永春,刘小君,王伟. 基于离散元法的表面形貌相互作用研究[J]. 合肥工业大学学报,2010,33(4)：487-490．
ZHAO Yongchun,LIU Xiaojun,WANG Wei. Study on the interaction of surface topography based on discrete element method[J]. Journal of Hefei University of Technology,2010,33(4)：487-490.
[21] 张成. 基于离散元法及实验的预应力切削刀具磨损研究[D]. 湘潭：湘潭大学,2013.
ZHANG Cheng. Research on tool wear of prestressed cutting based on discrete element method and experiment[D]. Xiangtan：Xiangtan University,2013.
[22] 刘国敏. 蚯蚓体表减粘降阻功能耦合仿生研究[D]. 长春：吉林大学,2009.
LIU Guomin. Coupling bionic research on the adhesion and resistance reduction of the earthworm surface[D]. Changchun：Jinlin University,2009.
[23] 卢智利. 蚶类表面形貌磨料磨损行为的试验与仿真研究[D]. 长春：吉林大学,2011.
LU Zhili. Experimental and simulation research on abrasive wear behavior of clam surface morphology[D]. Changchun：Jilin University,2011.
