机械工程学报 >

2018 , Vol. 54 >Issue 10: 78 - 84

DOI: https://doi.org/10.3901/JME.2018.10.078

材料科学与工程

MAG-TIG双电弧共熔池热源打底焊接自由成形研究

  • 周彦彬 ,
  • 史吉鹏 ,
  • 刘黎明
展开
  • 大连理工大学材料科学与工程学院 大连 116024
周彦彬,男,1982年出生,博士研究生。主要研究方向为双电弧共熔池热源高效焊接技术。E-mail:yanbinocean@mail.dlut.edu.cn

收稿日期: 2017-06-22

  修回日期: 2017-12-21

  网络出版日期: 2018-05-20

基金资助

国家自然科学基金面上（11375038）和国家自然科学基金创新研究群体（51621064）资助项目。

收起

Study on the Back Formation of Root Welding by MAG-TIG Twin-arc Welding in Thick Plate

  • ZHOU Yanbin ,
  • SHI Jipeng ,
  • LIU Liming
Expand
  • School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024

Received date: 2017-06-22

  Revised date: 2017-12-21

  Online published: 2018-05-20

Fold

摘要

打底焊接是中厚板多层多道焊接中的关键环节，对接头性能有着至关重要的影响。基于船舶制造、海洋工程、重型机械等行业中厚板结构件打底焊接时存在的自动化程度低，生产效率低等问题，本试验采用熔化极活性气体保护焊-钨极氩弧焊（Metal active gas-tungsten inert gas，MAG-TIG）双电弧共熔池热源焊接技术对厚度为20 mm的Q235-B板材进行打底焊接自由成形工艺研究及机制分析，采用高速摄像系统对TIG电弧作用前后电弧等离子体行为和熔池流动形态进行观察。试验结果表明：MAG-TIG双电弧共熔池热源打底焊接时，TIG电弧对MAG电弧有电磁排斥作用的同时还对熔池流动及热量传递有调控作用；结合焊接电弧等离子体行为与熔池流动形态分析发现，打底成形稳定性最佳时，TIG电弧加速焊接熔池中液态金属向后上方流动，促进热量向后传递，使得熔池前端底部及板材钝边处液态金属减少，受力易于平衡及稳定，可获得熔透均匀、连续、稳定的打底背面成形。

关键词： MAG-TIG双电弧; 中厚板; 打底焊接; 单面焊双面成形; 高效焊接

本文引用格式

周彦彬 , 史吉鹏 , 刘黎明 . MAG-TIG双电弧共熔池热源打底焊接自由成形研究[J]. 机械工程学报, 2018 , 54(10) : 78 -84 . DOI: 10.3901/JME.2018.10.078

Abstract

Backing welding is a key procedure in thick plate multi-pass welding and has a crucial impact on the performance of weld joints. Due to the low degree of automation and low production efficiency for back welding, among shipbuilding, marine engineering, heavy machinery and other industries, the metal active gas-tungsten inert gas (MAG-TIG) twin-arc tandem root welding process on thick plate with 20 mm is carried out, welding process and weld seam forming mechanism are investigated. Furthermore, arc plasma behaviors and molten pool state are studied during interaction between metal active gas (MAG) arc and tungsten inert gas (TIG) arc plasma. The results indicate that TIG arc has regulation effect on MAG arc heat distribution when arc discharges. Combined with arc plasma behaviors and molten pool state, a result can be found that, when the bead back formation is optimum, TIG arc accelerates the weld pool to flow backwards. Thus the quantity of liquid metal is reduced at the bottom of the molten pool and at the blunt edge of the plate. At this condition, molten pool with balance stress and steady state is obtained, and a sound, uniform and stable surface appearance back weld is acquired.

Key words： MAG-TIG double arc tandem welding; mild steel thick plate; root/backing welding; one-side welding with back formation; high efficient welding

参考文献

[1] 马晓丽,华学明,沈甘迪,等. 高效弧焊设备与方法在船舶制造中的应用现状[J]. 焊接技术,2008,37(1):1-4. MA Xiaoli,HUA Xueming,SHEN Gandi,et al. Application status of highly efficient arc welding equipments and methods in shipbuilding[J]. Welding Technology,2008,37(1):1-4.
[2] 陈彦宾,冯杰才,李俐群. 高强钢厚板激光-GMAW复合双面同步横焊特性研究[J]. 机械工程学报,2016,52(2):47-55. CHEN Yanbin,FENG Jiecai,LI Liqun. Research on the characteristics of double-sided hybrid laser-GMAW synchronous horizontal welding of high-strength thick steel plates[J]. Journal of Mechanical Engineering,2016,52(2):47-55.
[3] 刘殿宝,张广军,吴林. 大厚板双面双TIG电弧打底焊熔池成形特性[J]. 焊接学报,2012,33(3):37-40. LIU Dianbao, ZHANG Guangjun, WU Lin. Characteristics of pool formation in backing weld for large and thick plates using double-sided double TIG arc welding[J]. Transactions of the China Welding Institution,2012,33(3):37-40.
[4] 杨东青,李大用,张广军. 坡口预留间隙对高强度钢厚板打底焊缝成形的影响[J]. 焊接学报,2015,36(11):57-60. YANG Dongqing,LI Dayong,ZHANG Guangjun. Effect of reserved groove gap on backing welding of high-strength steel thick plates[J]. Transactions of the China Welding Institution,2015,36(11):57-60.
[5] KIM C. Back bead characteristics during butt welding of a thick plate for various backing conditions[J]. Materials Science Forum,2010,654(6):350-353.
[6] SUGITANI Y,MAO W. Automatic simultaneous control of bead height and back bead shape utilizing arc sensor in semi-automatic MAG welding with backing plate[J]. Quarterly Journal of the Japan Welding Society,1994,12(4):468-476.
[7] YAMANE S,YAMAMOTO H,ISHIHARA T,et al. Adaptive control of back bead in V groove welding without backing plate[J]. Science and Technology of Welding and Joining,2004,9(2):138-148.
[8] YAMANE S,YAMAMOTO H,KANEKO Y,et al. Sensing and seam tracking of welding line in backingless V groove welding[J]. Science and Technology of Welding and Joining,2006,11(5):586-592.
[9] YAMANE S,UJI K,NAKAJIMA T,et al. Application of switch back welding to V groove MAG welding[J]. Welding International,2015,29(2):103-109.
[10] YANG Chengdong,ZHONG Jiyong,CHEN Yuxi,et al. The realization of no back chipping for thick plate welding[J]. International Journal of Advanced Manufacture and Technology,2014,74(1):79-88.
[11] ZHANG Huajun,ZHANG Guangjun,CAI Chunbo,et al. Fundamental studies on in-process controlling angular distortion in asymmetrical double-sided double arc welding[J]. Journal of Materials Processing Technology,2008,205(1):214-223.
[12] WATANABE T,NAGAI Y,KITAZAWA Y K. Back bead control system for gas shielded arc one side welding[J]. Research and Development Kobe Steel Engineering Reports,1987,37(4):77-80.
[13] WU Chuansong,JIA Chuanbao,CHEN Maoai. A controlsystem for keyhole plasma arc welding of stainless steel with medium thickness[J]. Welding Journal,2010,89(11):225s-231s.
[14] WAHBA M,MIZUTANI M,KATAYAMA S. Single pass hybrid laser-arc welding of 25 mm thick square groove butt joints[J]. Materials and Design,2016,97(5):1-6.
[15] LI Kehai,ZHANG Yuming. Consumable doubleelectrode GMAW part I:the process[J]. Welding Journal,2008,87(1):11s-17s.
[16] KANEMARU S,SASAKI T,SATO T,et al. Study for TIG-MIG hybrid welding process[J]. Welding in the World,2014,58(1):11-18.
[17] MENG Xiangmeng,QIN Guoliang,ZHANG Yuqi,et al. High speed TIG-MAG hybrid arc welding of mild steel plate[J]. Journal of Materials Processing Technology,2014,214(11):2417-2424.
[18] 杨涛,张生虎,高洪明,等. TIG-MIG复合焊电弧特性机理分析[J]. 焊接学报,2012,33(7):25-28. YANG Tao,ZHANG Shenghu,GAO Hongming,et al. Analysis of mechanism for TIG-MIG hybrid arc properties[J]. Transactions of the China Welding Institution,2012,33(7):25-28.
[19] MIAO Yugang,XU Xiangfang,WU Bintao,et al. Effects of bypass current on the stability of weld pool during double sided arc welding[J]. Journal of Materials Processing Technology,2014,214(8):1590-1596.
[20] 王新鑫,樊丁,黄健康,等. TIG焊电弧-熔池传热与流动数值模拟[J]. 机械工程学报,2015,51(10):69-78. WANG Xinxin,FAN Ding,HUANG Jiankang,et al. Numerical simulation of heat transfer and fluid flow for arc-weld pool in TIG welding[J]. Journal of Mechanical Engineering,2015,51(10):69-78.
[21] 彭远江,马崇山. 手工电弧焊单面焊双面成形的机理及成形控制的探讨[J]. 焊接技术,1989,18(5):37-41. PENG Yuanjiang,MA Chongshan. Discussion on the mechanism and forming control of single side welding of manual arc welding[J]. Welding Technology,1989,18(5):37-41.
[22] 周方明,于治水,王宇,等. TIG-MIG双面对称焊焊缝成形机理研究[J]. 机械工程学报,2004,40(4):58-61. ZHOU Fangming,YU Zhishui,WANG Yu,et al. Study on shaping mechanism of weld for TIG-MIG double-sided symmetric arc welding[J]. Chinese Journal of Mechanical Engineering,2004,40(4):58-61.
[23] 陈姬,宗然,武传松,等. TIG-MIG复合焊电弧间相互作用对焊接过程的影响[J]. 机械工程学报,2016,52(6):59-64. CHEN Ji,ZONG Ran,WU Chuansong,et al. Influence of arcs interaction on TIG-MIG hybrid welding process[J]. Journal of Mechanical Engineering,2016,52(6):59-64.
[24] SAHOO P,DEBROY T,MCNALLAN M J. Surface tension of binary metal-surface active solute systems under conditions relevant to welding metallurgy[J]. Metallurgical Transactions B,1988,19(3):483-491.
[25] ZHAO Y Z,ZHAO H Y,LEI Y P,et al. Theoretical study of Marangoni convection and weld penetration under influence of high oxygen content in base metal[J]. Science and Technology of Welding and Joining,2007,12(5):410-417.
[26] 赵琳,塚本进,荒金吾郎,等. 激光-电弧复合焊接保护气体O2含量对焊缝均匀性和熔池流动的影响[J]. 中国激光,2015,42(6):130-136. ZHAO Lin,TSUKAMOTO Susumu,ARAKANE Goro,et al. Influence of shielding oxygen content on weld homogeneity and fluid flow in laser-arc hybrid welding[J]. Chinese Journal of Lasers,2015,42(6):130-136.
Options
文章导航

/

〈 〉

版权所有 © 《机械工程学报》编辑部

技术支持：北京玛格泰克科技发展有限公司