Progress in Joint Forming Technology of Aviation Composites
LIU Jiaming1,2, QUAN Dong1,2, ZHAO Guoqun1,2
Author information+
1. School of Materials Science and Engineering, Shandong University, Jinan 250061; 2. National Key Laboratory of High-end Equipment and Advanced Technology in Metal Processing, Shandong University, Jinan 250061
Fiber reinforced composites have outstanding advantages such as high specific strength, high specific modulus, excellent structural performance and great designability, and are able to achieve components lightweight and integrated structural functional design. These composites have important strategic positions in the fields such as aerospace, transportation, energy, and national defense technology. With the widespread application of fiber reinforced composites in the aerospace and other fields, high-performance joining technology between the composites and lightweight alloys has become one of the important guarantees for the strength and stability of aviation structures. Focusing on the mechanical fastening, adhesive bonding, and welding between composites and the light alloys and composites, this paper reviews the latest research progress in the joining technology of fiber reinforced composites. The technical characteristics of various joining technologies of the composites were comprehensively discussed and analyzed. The advantages and disadvantages of various joining technologies, as well as the improvement ability of joining structure performance, were also summarized and compared. Furthermore, the future development and research trends of various joining technologies are proposed.
LIU Jiaming, QUAN Dong, ZHAO Guoqun.
Progress in Joint Forming Technology of Aviation Composites[J]. Journal of Mechanical Engineering, 2023, 59(20): 119-142 https://doi.org/10.3901/JME.2023.20.119
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] GENG Daxi，LIU Yihang，SHAO Zhenyu，et al. Delamination formation，evaluation and suppression during drilling of composite laminates:A review[J]. Composite Structures，2019，216:168-186. [2] LEE J M，MIN B J，PARK J H，et al. Design of lightweight CFRP automotive part as an alternative for steel part by thickness and lay-up optimization[J]. Materials，2019，12(14):2309. [3] RAJAK D K，PAGAR D D，MENEZES P L，et al. Fiber-reinforced polymer composites:Manufacturing，properties，and applications[J]. Polymers，2019，11(10):1667. [4] KELLY G，HALLSTR M S. Bearing strength of carbon fibre/epoxy laminates:Effects of bolt-hole clearance[J]. Composites Part B:Engineering，2004，35(4):331-343. [5] QUAN Dong，IVANKOVIC A. The curing behaviour and thermo-mechanical properties of core-shell rubber-modified epoxy nanocomposites[J]. Polymers and Polymer Composites，2019，27(3):168-175. [6] QUAN Dong，WANG Guilong，ZHAO Guoqun，et al. On the fracture behaviour of aerospace-grade Polyether-ether-ketone composite-to-aluminium adhesive joints[J]. Composites Communications，2022，30:101098. [7] QUAN Dong，LIU Jiaming，YAO Liaojun，et al. Interlaminar and intralaminar fracture resistance of recycled carbon fibre/PPS composites with tailored fibre/matrix adhesion[J]. Composites Science and Technology，2023，239:110051. [8] MIN Junying，HU Jiahao，SUN Chengcheng，et al. Fabrication processes of metal-fiber reinforced polymer hybrid components:A review[J]. Advanced Composites and Hybrid Materials，2022，5(2):651-678. [9] QUAN Dong，MISCHO Chiara，LI Xiping，et al. Improving the electrical conductivity and fracture toughness of carbon fibre/epoxy composites by interleaving MWCNT-doped thermoplastic veils[J]. Composites Science and Technology，2019，182:107775. [10] QUAN Dong，ALDERLIESTEN R，DRANSFELD C，et al. Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils[J]. Composite Structures，2020，252:112699. [11] QUAN Dong，BOLOGNA F，SCARSELLI G，et al. Interlaminar fracture toughness of aerospace-grade carbon fibre reinforced plastics interleaved with thermoplastic veils[J]. Composites Part A:Applied Science and Manufacturing，2020，128:105642. [12] QUAN Dong，BOLOGNA F，SCARSELLI G，et al. Mode-II fracture behaviour of aerospace-grade carbon fibre/epoxy composites interleaved with thermoplastic veils[J]. Composites Science and Technology，2020，191:108065. [13] QUAN Dong，DEEGAN B，ALDERLIESTEN R，et al. The influence of interlayer/epoxy adhesion on the mode-I and mode-II fracture response of carbon fibre/epoxy composites interleaved with thermoplastic veils[J]. Materials & Design，2020，192:108781. [14] QUAN Dong，MISCHO C，BINSFELD L，et al. Fracture behaviour of carbon fibre/epoxy composites interleaved by MWCNT-and graphene nanoplatelet-doped thermoplastic veils[J]. Composite Structures，2020，235:111767. [15] QUAN Dong，YUE Dongsheng，MA Yannan，et al. On the mix-mode fracture of carbon fibre/epoxy composites interleaved with various thermoplastic veils[J]. Composites Communications，2022，33:101230. [16] QUAN Dong，FLYNN S，ARTUSO M，et al. Interlaminar fracture toughness of CFRPs interleaved with stainless steel fibres[J]. Composite Structures，2019，210:49-56. [17] QUAN Dong，DEEGAN B，BINSFELD L，et al. Effect of interlaying UV-irradiated PEEK fibres on the mechanical，impact and fracture response of aerospace-grade carbon fibre/epoxy composites[J]. Composites Part B:Engineering，2020，191:107923. [18] QUAN Dong，FAROOQ U，ZHAO Guoqun，et al. Recycled carbon fibre mats for interlayer toughening of carbon fibre/epoxy composites[J]. Materials & Design，2022，218:110671. [19] QUAN Dong，URDANIZ J L，IVANKOVIĆ A. Enhancing mode-I and mode-II fracture toughness of epoxy and carbon fibre reinforced epoxy composites using multi-walled carbon nanotubes[J]. Materials & Design，2018，143:81-92. [20] QUAN Dong，MURPHY N，IVANKOVIĆ A，et al. Fatigue delamination behaviour of carbon fibre/epoxy composites interleaved with thermoplastic veils[J]. Composite Structures，2022，281:114903. [21] 杨苑铎，李洋，李一昂，等. 碳纤维增强热塑性复合材料超声波焊接研究进展[J]. 机械工程学报，2022，57(22):130-156. YANG Yuanduo，LI Yang，LI Yiang，et al. Advances in ultrasonic welding of carbon fiber reinforced thermoplastic composites[J]. Journal of Mechanical Engineering，2021，57(22):130-156. [22] SUBRAMANIAN K，COOK N H. Sensing of drill wear and prediction of drill life[J]. Journal of Manufacturing Science and Engineering，1977，99(2):295. [23] KUO Chunliang，WANG Chihying，KO Shunkai. Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites[J]. Wear，2018，398:1-12. [24] UHLMANN E，MULLANY B，BIERMANN D，et al. Process chains for high-precision components with micro-scale features[J]. CIRP Annals，2016，65(2):549-572. [25] STONE R，KRISHNAMURTHY K. A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy laminates[J]. International Journal of Machine Tools and Manufacture，1996，36(9):985-1003. [26] PORTEMONT G，BERTHE J，DEUDON A，et al. Static and dynamic bearing failure of carbon/epoxy composite joints[J]. Composite Structures，2018，204:131-141. [27] HAUSMANN J M，HELFRICH B，MOTSCH N. Aspects of preloaded bolted joints of fiber reinforced polymers and metals[J]. Key Engineering Materials，2017，742:401-407. [28] YANG Yu，CHENG Hui，DU Kunpeng，et al. Microscale damage modeling of bolt-hole contact interface during the bolt installation process of composite structure[J]. Composite Structures，2022，291:115561. [29] NASSAR S A，VIRUPAKSHA V L，GANESHMURTHY S. Effect of bolt tightness on the behavior of composite joints[J]. Journal of Pressure Vessel Technology，Transactions of the ASME，2007，129(1):43-51. [30] XU Guanhua，ZHANG Kaifu，CHENG Hui，et al. An efficient physically-based damage model for interface damage of composites sleeved interference joint and influence analysis of its interface friction[J]. Composite Structures，2021，275:114425. [31] ZHANG Kaifu，LI Hailin，CHENG Hui，et al. Combined effects of seawater ageing and fatigue loading on the bearing performance and failure mechanism of CFRP/CFRP single-lap bolted joints[J]. Composite Structures，2020，234:111677. [32] KHAN S A，KHAN H A，AWAIS R，et al. Classification of progressive failure and mechanical behavior of dissimilar material hybrid joints at varying temperatures[J]. Thin-Walled Structures，2023，182:110212. [33] COELHO A M G，MOTTRAM J T. A review of the behaviour and analysis of bolted connections and joints in pultruded fibre reinforced polymers[J]. Materials & Design，2015，74:86-107. [34] LEE C J，LEE J M，RYU H Y，et al. Design of hole-clinching process for joining of dissimilar materials–Al6061-T4 alloy with DP780 steel，hot-pressed 22MnB5 steel，and carbon fiber reinforced plastic[J]. Journal of Materials Processing Technology，2014，214(10):2169-2178. [35] LEE S H. Effect of tool shape on hole clinching for CFRP with steel and aluminum alloy sheet[C]//Key Engineering Materials. Switzerland:Trans Tech Publications，2014，476-483. [36] LAMBIASE F，DI I A. Joining Aluminum with Titanium alloy sheets by mechanical clinching[J]. Journal of Manufacturing Processes，2018，35:457-465. [37] LAMBIASE F，DURANTE M，DI I A. Fast joining of aluminum sheets with glass fiber reinforced polymer (GFRP) by mechanical clinching[J]. Journal of Materials Processing Technology，2016，236:241-251. [38] LI Dezhi，HAN Li，THORNTON M，et al. Influence of edge distance on quality and static behaviour of self-piercing riveted aluminium joints[J]. Materials & Design，2012，34:22-31. [39] VORDERBRUEGGEN J，MESCHUT G. Investigations on a material-specific joining technology for CFRP hybrid joints along the automotive process chain[J]. Composite Structures，2019，230:111533. [40] BORBA N Z，BLAGA L，DOS S J F，et al. Direct-friction riveting of polymer composite laminates for aircraft applications[J]. Materials Letters，2018，215:31-34. [41] MOURITZ A P. Review of z-pinned laminates and sandwich composites[J]. Composites Part A:Applied Science and Manufacturing，2020，139:106128. [42] JIANG Hao，SUN Liqiang，LIANG Jusong，et al. Shear failure behavior of CFRP/Al and steel/Al electromagnetic self-piercing riveted joints subject to high-speed loading[J]. Composite Structures，2019，230:111500. [43] 程晖，樊新田，徐冠华，等. 航空复合材料结构精密干涉连接技术综述[J]. 航空学报，2021，42(10):55-73. CHENG Hui，FAN Xintian，XU Guanhu，et al. State of the art of precise interference-fit technology for composite structures in aircraft[J]. Acta Aeronautica et Astronautica Sinica，2021，42(10):55-73. [44] LIU Yang，ZHUANG Weimin，WU Shijie. Effects of hole diameter and ply angle on the mechanical behaviour of hole-clinched joints in carbon fibre reinforced polymers and aluminium alloy sheets[J]. The International Journal of Advanced Manufacturing Technology，2020，106:5345-5352. [45] LEE S H，LEE C J，LEE K H，et al. Influence of tool shape on hole clinching for carbon fiber-reinforced plastic and SPRC440[J]. Advances in Mechanical Engineering，2014，6:810864. [46] WANG Jian，YU Yue，FU Changyun，et al. Experimental investigation of clinching CFRP/aluminum alloy sheet with prepreg sandwich structure[J]. Journal of Materials Processing Technology，2020，277:116422. [47] LAMBIASE F，KO D C. Feasibility of mechanical clinching for joining aluminum AA6082-T6 and Carbon Fiber Reinforced Polymer sheets[J]. Materials & Design，2016，107:341-352. [48] WAGNER J，WILHELM M，BAIER H，et al. Experimental analysis of damage propagation in riveted CFRP-steel structures by thermal loads[J]. The International Journal of Advanced Manufacturing Technology，2014，75:1103-1113. [49] DI F G，FRATINI L，PASTA A. Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks[J]. International Journal of Adhesion and Adhesives，2013，41:24-32. [50] DI F G，FRATINI L，PASTA A，et al. On the self-piercing riveting of aluminium blanks and carbon fibre composite panels[J]. International journal of material forming，2013，6:137-144. [51] UCSNIK S，SCHEERER M，ZAREMBA S，et al. Experimental investigation of a novel hybrid metal–composite joining technology[J]. Composites Part A:Applied Science and Manufacturing，2010，41(3):369-374. [52] JIANG Hao，ZENG Chaochao，LI Guangyao，et al. Effect of locking mode on mechanical properties and failure behavior of CFRP/Al electromagnetic riveted joint[J]. Composite Structures，2021，257:113162. [53] FENG Ziwei，ZHAO Hongyun，TAN Caiwang，et al. Nanosecond laser ablation for improving the strength of CFRTP and aluminum alloy adhesively bonded joints[J]. Composite Structures，2021，274:114369. [54] 汤祖阳，王亚强，董红刚. 轻质异种材料搅拌摩擦点焊技术研究进展[J]. 机械工程学报，2020，56(6):147-158. TANG Zuyang，WANG Yaqiang，DONG Honggang. Progress of the friction stir spot welding in lightweight dissimilar materials[J]. Journal of Mechanical Engineering，2020，56(6):147-158. [55] DMITRUK A，MAYER P，PACH J. Pull-off strength of thermoplastic fiber-reinforced composite coatings[J]. Journal of Adhesion Science and Technology，2018，32(9):997-1006. [56] PARK R，JANG J. The effect of surface roughness on the adhesion properties of ceramic/hybrid FRP adhesively bonded systems[J]. Journal of Adhesion Science and Technology，1998，12(7):713-729. [57] PARK S M，ROY R，KWEON J H，et al. Strength and failure modes of surface treated CFRP secondary bonded single-lap joints in static and fatigue tensile loading regimes[J]. Composites Part A:Applied Science and Manufacturing，2020，134:105897. [58] LIM S J，CHEON J，KIM M. Effect of laser surface treatments on a thermoplastic PA 6/carbon composite to enhance the bonding strength[J]. Composites Part A:Applied Science and Manufacturing，2020，137:105989. [59] QUAN Dong，ALDERLIESTEN R，DRANSFELD C，et al. Co-cure joining of epoxy composites with rapidly UV-irradiated PEEK and PPS composites to achieve high structural integrity[J]. Composite Structures，2020，251:112595. [60] QUAN Dong，ALDERLIESTEN R，DRANSFELD C，et al. Significantly enhanced structural integrity of adhesively bonded PPS and PEEK composite joints by rapidly UV-irradiating the substrates[J]. Composites Science and Technology，2020，199:108358. [61] QUAN Dong，DEEGAN B，BYRNE L，et al. Rapid surface activation of carbon fibre reinforced PEEK and PPS composites by high-power UV-irradiation for the adhesive joining of dissimilar materials[J]. Composites Part A:Applied Science and Manufacturing，2020，137:105976. [62] SCARSELLI G，QUAN Dong，MURPHY N，et al. Adhesion improvement of thermoplastics-based composites by atmospheric plasma and UV treatments[J]. Applied Composite Materials，2021，28:71-89. [63] QUAN Dong，ZHAO Guoqun，WANG Guilong，et al. The development of high performance hybrid joints between epoxy composites and PEEK/PPS composites:The mode-II and mix mode-I/II fracture behaviour[J]. Composite Structures，2022，292:115638. [64] QUAN Dong，WANG Guilong，ZHAO Guoqun，et al. On the interlayer toughening of carbon fibre/epoxy composites using surface-activated ultra-thin PEEK films[J]. Composite Structures，2023，303:116309. [65] MENNINGEN M，WEISS H. Application of fracture mechanics to the adhesion of metal coatings on CFRP[J]. Surface and Coatings Technology，1995，76:835-840. [66] ZHANG Juan，Souza M D，CREIGHTON C，et al. New approaches to bonding thermoplastic and thermoset polymer composites[J]. Composites Part A:Applied Science and Manufacturing，2020，133:105870. [67] 邹田春，刘志浩，李晔，等. 等离子体表面处理对碳纤维增强树脂基复合材料(CFRP)胶接性能及表面特性的影响[J]. 中国表面工程，2022，35(1):125-134. ZOU Tianchun，LIU Zhihao，LI Ye，et al. Effect of plasma surface treatment on bonding properties and surface properties of CFRP[J]. China Surface Engineering，2022，35(1):125-134. [68] GULTEKIN K，AKPINAR S，ÖZEL A，et al. Effects of unbalance on the adhesively bonded composites-aluminium joints[J]. The Journal of Adhesion，2017，93(9):674-687. [69] CHOWDHURY N M，WANG J，CHIU W K，et al. Experimental and finite element studies of thin bonded and hybrid carbon fibre double lap joints used in aircraft structures[J]. Composites Part B:Engineering，2016，85:233-242. [70] ZENG Qinggang，SUN C T. Novel design of a bonded lap joint[J]. AIAA Journal，2001，39(10):1991-1996. [71] DA S L F，ADAMS R. Techniques to reduce the peel stresses in adhesive joints with composites[J]. International Journal of Adhesion and Adhesives，2007，27(3):227-235. [72] CHENG Xiaoquan，BAIG Y，HU Renwei，et al. Study of tensile failure mechanisms in scarf repaired CFRP laminates[J]. International Journal of Adhesion and Adhesives，2013，41:177-185. [73] MATOUŠ K，DVORAK G J. Analysis of tongue and groove joints for thick laminates[J]. Composites Part B:Engineering，2004，35(6-8):609-617. [74] KUPSKI J，FREITAS S T D. Design of adhesively bonded lap joints with laminated CFRP adherends:Review，challenges and new opportunities for aerospace structures[J]. Composite Structures，2021，268:113923. [75] 冯闯，赵广慧. 复合材料胶接接头力学性能的研究进展[J]. 中国塑料，2021，35(11):144. FENG Chuang，ZHAO Guanghui. Research progress on mechanical properties of adhesive joints in composite materials[J]. China Plastics，2021，35(11):144-160. [76] QUAN Dong，IVANKOVIC A. Effect of core–shell rubber (CSR) nano-particles on mechanical properties and fracture toughness of an epoxy polymer[J]. Polymer，2015，66:16-28. [77] QUAN Dong，MURPHY N，IVANKOVIC A. Fracture behaviour of epoxy adhesive joints modified with core-shell rubber nanoparticles[J]. Engineering Fracture Mechanics，2017，182:566-576. [78] QUAN Dong，MURPHY N，IVANKOVIC A. Fracture behaviour of a rubber nano-modified structural epoxy adhesive:Bond gap effects and fracture damage zone[J]. International Journal of Adhesion and Adhesives，2017，77:138-150. [79] QUAN Dong，CARDIFF P，MURPHY N，et al. Damage behaviour of nano-modified epoxy adhesives subject to high stress constraint[J]. The Journal of Adhesion，2018，94(5):387-405. [80] QUAN Dong，MURPHY N，CARDIFF P，et al. The intrinsic fracture property of a rubber-modified epoxy adhesive:Geometrical transferability[J]. Engineering Fracture Mechanics，2018，203:240-249. [81] QUAN Dong，PEARSON R A，IVANKOVIC A. Interaction of toughening mechanisms in ternary nanocomposites[J]. Polymer Composites，2018，39(10):3482-3496. [82] QUAN Dong，CAROLAN D，ROUGE C，et al. Mechanical and fracture properties of epoxy adhesives modified with graphene nanoplatelets and rubber particles[J]. International Journal of Adhesion and Adhesives，2018，81:21-29. [83] QUAN Dong，CAROLAN D，ROUGE C，et al. Carbon nanotubes and core-shell rubber nanoparticles modified structural epoxy adhesives[J]. Journal of Materials Science，2017，52:4493-4508. [84] QUAN Dong，MOLONEY P，CAROLAN D，et al. Synergistic toughening and electrical functionalization of an epoxy using MWCNTs and silane‐/plasma‐activated basalt fibers[J]. Journal of Applied Polymer Science，2021，138(1):49605. [85] QUAN Dong，URD N J L，ROUGE C，et al. The enhancement of adhesively-bonded aerospace-grade composite joints using steel fibres[J]. Composite Structures，2018，198:11-18. [86] TAO Ran，LI Xiaole，YUDHANTO A，et al. Toughening adhesive joints through crack path engineering using integrated polyamide wires[J]. Composites Part A:Applied Science and Manufacturing，2022，158:106954. [87] LIU Jinsong，LI Yibo，HUANG Minghui，et al. The effect of transverse low-velocity pre-impact on the residual strength of Al/PEEK/CFRTP adhesive joints[J]. International Journal of Impact Engineering，2022，168:104295. [88] ARGOUD N，ROUSSEAU J，PIEZEL B，et al. Multi-axial testing of thick adhesive bonded joints of fibre reinforced thermoplastic polymers[J]. International Journal of Adhesion and Adhesives，2018，84:37-47. [89] QUAN Dong，FAROOQ U，ZHAO Guoqun，et al. Co-cured carbon fibre/epoxy composite joints by advanced thermoplastic films with excellent structural integrity and thermal resistance[J]. International Journal of Adhesion and Adhesives，2022，118:103247. [90] LIU Jiaming，LIU Jia，YUE Dongsheng，et al. The mix-mode fracture behaviour of aerospace composite joints co-cured by different forms of advanced thermoplastics[J]. Composites Communications，2023，38:101519. [91] QUAN Dong，MA Yannan，YUE Dongsheng，et al. On the application of strong thermoplastic–thermoset interactions for developing advanced aerospace-composite joints[J]. Thin-Walled Structures，2023，186:110671. [92] SALOM O G R，GOJZEWSKI H，ERARTSIN O，et al. Novel co-bonded thermoplastic elastomer-epoxy/glass hybrid composites:The effect of cure temperature on the interphase morphology[J]. Polymer Testing，2022，115:107736. [93] van den AKKER B P H，DONADON M V，LOENDERSLOOT R，et al. The influence of hygrothermal aging on the fatigue behavior and residual strength of post-buckled co-bonded stiffened panels subjected to compressive loading[J]. Composites Part B:Engineering，2020，194:108023. [94] GOLEWSKI P，SADOWSKI T. Investigation of the effect of chamfer size on the behaviour of hybrid joints made by adhesive bonding and riveting[J]. International Journal of Adhesion and Adhesives，2017，77:174-182. [95] CUI Junjia，GAO Song，JIANG Hao，et al. Adhesive bond-electromagnetic rivet hybrid joining technique for CFRP/Al structure:Process，design and property[J]. Composite Structures，2020，244:112316. [96] MARIAM M，AFENDI M，MAJID M S A，et al. Tensile and fatigue properties of single lap joints of aluminium alloy/glass fibre reinforced composites fabricated with different joining methods[J]. Composite Structures，2018，200:647-658. [97] PIZZORNI M，PARMIGGIANI A，PRATO M. Adhesive bonding of a mixed short and continuous carbon-fiber-reinforced Nylon-6 composite made via fused filament fabrication[J]. International Journal of Adhesion and Adhesives，2021，107:102856. [98] LOUTAS T，TSOKANAS P，KOSTOPOULOS V，et al. Mode I fracture toughness of asymmetric metal-composite adhesive joints[J]. Materials Today:Proceedings，2021，34:250-259. [99] KARAKAYA N，PAPILA M，ÖZKO G. Effects of hot melt adhesives on the interfacial properties of overmolded hybrid structures of polyamide-6 on continuous carbon fiber/epoxy composites[J]. Composites Part A:Applied Science and Manufacturing，2020，139:106106. [100] 田亚南. 环氧基复合材料共固化胶接的界面结构及其性能研究[D]. 哈尔滨:黑龙江省科学院石油化学研究院，2022. TIAN Yanan. Structure and properties of the co-curing bonding interface of epoxy-matrix composites[D]. Harbin:Institute of Petrochemistry Heilongjiang Academy of Sciences，2022. [101] QUAN Dong，ZHAO Guoqun，SCARSELLI G，et al. Co-curing bonding of carbon fibre/epoxy composite joints with excellent structure integrity using carbon fibre/PEEK tapes[J]. Composites Science and Technology，2022，227:109567. [102] LEONE C，GENNA S. Effects of surface laser treatment on direct co-bonding strength of CFRP laminates[J]. Composite Structures，2018，194:240-251. [103] JIANG Qingbin，WANG Xiaolin，YAN Jiuchun. Welding of thermoplastic composites[J]. Materials Science and Technology，2005，13(3):247-250. [104] 王家锋，苏佳煜，朱姝，等. 基于导热板的碳纤维增强聚醚醚酮复合材料感应焊接温度调控[J]. 复合材料学报，2021，38(8):2625-2634. WANG Jiafeng，SU Jiayu，ZHU Shu，et al. Temperature control for induction welding of carbon fiber reinforced polyetheretherketone (CF/PEEK) composite material via thermal conduction plate[J]. Acta Materiae Compositae Sinica，2021，38(8):2625-2634. [105] 韩志勇，陈栋，路鹏程. 碳纤维增强聚苯硫醚复合材料感应焊接研究[J]. 塑料工业，2019，47(11):134-140. HAN Zhiyong，CHEN Dong，LU Pengcheng. Study on induction welding of carbon fiber reinforced polyphenylenesulfide composites[J]. China Plastics Industry，2019，47(11):134-140. [106] SHI Huajie，VILLEGAS I F，BERSEE H E. Analysis of void formation in thermoplastic composites during resistance welding[J]. Journal of Thermoplastic Composite Materials，2017，30(12):1654-1674. [107] VILLEGAS I F，BERSEE H E. Characterisation of a metal mesh heating element for closed-loop resistance welding of thermoplastic composites[J]. Journal of Thermoplastic Composite Materials，2015，28(1):46-65. [108] ZWEIFEL L，BRAUNER C. Investigation of the interphase mechanisms and welding behaviour of fast-curing epoxy based composites with co-cured thermoplastic boundary layers[J]. Composites Part A:Applied Science and Manufacturing，2020，139:106120. [109] DEVINE J. Ultrasonic plastics welding basics[J]. Welding Journal，2001，80(1):29-33. [110] VILLEGAS I F. In situ monitoring of ultrasonic welding of thermoplastic composites through power and displacement data[J]. Journal of Thermoplastic Composite Materials，2015，28(1):66-85. [111] TUTUNJIAN S，EROGLU O，DANNEMANN M，et al. A numerical analysis of an energy directing method through friction heating during the ultrasonic welding of thermoplastic composites[J]. Journal of Thermoplastic Composite Materials，2020，33(11):1569-1587. [112] ZHANG Zongbo，WANG Xiaodong，LUO Yi，et al. Study on heating process of ultrasonic welding for thermoplastics[J]. Journal of Thermoplastic Composite Materials，2010，23(5):647-664. [113] PALARDY G. Smart ultrasonic welding of thermoplastic composites[C/CD]//Proceedings of the American Society for Composites-31st Technical Conference. Williamsburg:ASC，2016. [114] ZHAO Tian，BROEK C，PALARDY G，et al. Towards robust sequential ultrasonic spot welding of thermoplastic composites:Welding process control strategy for consistent weld quality[J]. Composites Part A:Applied Science and Manufacturing，2018，109:355-367. [115] VILLEGAS I F. Strength development versus process data in ultrasonic welding of thermoplastic composites with flat energy directors and its application to the definition of optimum processing parameters[J]. Composites Part A:Applied Science and Manufacturing，2014，65:27-37. [116] JONGBLOED B. Improving weld uniformity in continuous ultrasonic welding of thermoplastic composites[C/CD]//Proceedings of the 18th European Conference on Composite Materials. Athens:Proceedings of the European Conference on Composite Materials-ECCM，June24-28，2018. [117] TAKEDA S I，TANKS J D，SUGIMOTO S，et al. Application of sheet-like energy directors to ultrasonic welding of carbon fibre-reinforced thermoplastics[J]. Advanced Composite Materials，2021，30(2):192-204. [118] YANG Yuanduo，LI Yang，LIU Zeguang，et al. Ultrasonic welding of short carbon fiber reinforced PEEK with spherical surface anvils[J]. Composites Part B:Engineering，2022，231:109599. [119] FERNANDEZ V I，VALLE G B，BERSEE H E N，et al. A comparative evaluation between flat and traditional energy directors for ultrasonic welding of CF/PPS thermoplastic composites[J]. Composite Interfaces，2015，22(8):717-729. [120] SENDERS F，VAN B M，PALARDY G，et al. Zero-flow:A novel approach to continuous ultrasonic welding of CF/PPS thermoplastic composite plates[J]. Advanced Manufacturing:Polymer & Composites Science，2016，2(3-4):83-92. [121] VILLEGAS I F，PALARDY G. Ultrasonic welding of CF/PPS composites with integrated triangular energy directors:melting，flow and weld strength development[J]. Composite Interfaces，2017，24(5):515-528. [122] PALARDY G，VILLEGAS I F. On the effect of flat energy directors thickness on heat generation during ultrasonic welding of thermoplastic composites[J]. Composite Interfaces，2017，24(2):203-214. [123] TAO Wang，SU Xuan，WANG Haohan，et al. Influence mechanism of welding time and energy director to the thermoplastic composite joints by ultrasonic welding[J]. Journal of Manufacturing Processes，2019，37:196-202. [124] BHUDOLIA S K，GOHEL G，FAI L K，et al. Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites[J]. Materials Letters，2020，264:127362. [125] KÖHLER F，VILLEGAS I，DRANSFELD C，et al. Static ultrasonic welding of carbon fibre unidirectional thermoplastic materials and the influence of heat generation and heat transfer[J]. Journal of Composite Materials，2021，55(15):2087-2102. [126] VILLEGAS I F，VAN M R. Ultrasonic welding of carbon/epoxy and carbon/PEEK composites through a PEI thermoplastic coupling layer[J]. Composites Part A:Applied Science and Manufacturing，2018，109:75-83. [127] TSIANGOU E，KUPSKI J，DE F S T，et al. On the sensitivity of ultrasonic welding of epoxy-to polyetheretherketone (PEEK)-based composites to the heating time during the welding process[J]. Composites Part A:Applied Science and Manufacturing，2021，144:106334. [128] GOHEL G，SOH C Z，LEONG K F，et al. Effect of PMMA coupling layer in enhancing the ultrasonic weld strength of novel room temperature curable acrylic thermoplastic to epoxy based composites[J]. Polymers，2022，14(9):1862. [129] TSIANGOU E，FREITAS S T D，BENEDICTUS R，et al. On the sensitivity of the ultrasonic welding process of epoxy-to polyetheretherketone (PEEK)-based composites to the welding force and amplitude of vibrations[J]. Composites Part C:Open Access，2021，5:100141. [130] TSIANGOU E，TEIXEIRA D F S，VILLEGAS I F，et al. Ultrasonic welding of epoxy-to polyetheretherketone-based composites:Investigation on the material of the energy director and the thickness of the coupling layer[J]. Journal of Composite Materials，2020，54(22):3081-3098. [131] TSIANGOU E，FREITAS S T D，VILLEGAS I F，et al. Investigation on energy director-less ultrasonic welding of polyetherimide (PEI)-to epoxy-based composites[J]. Composites Part B:Engineering，2019，173:107014. [132] TSIANGOU E，TEIXEIRA D F S，VILLEGAS I，et al. Ultrasonic welding of CF/Epoxy to CF/PEEK composites:Effect of the energy director material on the welding process[C]//Proceedings of the 18th European Conference on Composite Materials. Athens:Proceedings of the European Conference on Composite Materials-ECCM，June24-28，2018. [133] VILLEGAS I F，RUBIO P V. High-temperature hybrid welding of thermoplastic (CF/Peek) to thermoset (CF/Epoxy) composites[C]//20th International Conference on Composite Materials，Copenhagen，Denmark，2015:19-24. [134] LIONETTO F，BALLE F，MAFFEZZOLI A. Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites[J]. Journal of Materials Processing Technology，2017，247:289-295. [135] BALLE F，WAGNER G，EIFLER D. Ultrasonic metal welding of aluminium sheets to carbon fibre reinforced thermoplastic composites[J]. Advanced Engineering Materials，2009，11(1-2):35-39. [136] WAGNER G，BALLE F，EIFLER D. Ultrasonic welding of aluminum alloys to fiber reinforced polymers[J]. Advanced Engineering Materials，2013，15(9):792-803. [137] LIONETTO F，MELE C，LEO P，et al. Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum:Mechanical and electrochemical characterization[J]. Composites Part B:Engineering，2018，144:134-142. [138] STAAB F，BALLE F. Ultrasonic torsion welding of ageing-resistant Al/CFRP joints:Properties，microstructure and joint formation[J]. Ultrasonics，2019，93:139-144. [139] TANG Shenhung，CHENG Chungwei，YEH R，et al. Direct joining of 3D-printed thermoplastic parts to SLM-fabricated metal cellular structures by ultrasonic welding[J]. The International Journal of Advanced Manufacturing Technology，2018，99:729-736. [140] DAL C U F，VILLEGAS I F，TACHON J. Ultrasonic plastic welding of CF/PA6 composites to aluminium:process and mechanical performance of welded joints[J]. Journal of Composite Materials，2019，53(18):2607-2621.
PDF(1047 KB)
