激光熔覆陶瓷涂层研究现状与展望

王伟志, 马国政, 韩珩, 李洋, 周雳, 赵海朝, 许建峰, 郭伟玲, 王海斗

机械工程学报 ›› 2023, Vol. 59 ›› Issue (7) : 92-109.

PDF(1135 KB)
PDF(1135 KB)
机械工程学报 ›› 2023, Vol. 59 ›› Issue (7) : 92-109. DOI: 10.3901/JME.2023.07.092
绿色制造工艺与装备

激光熔覆陶瓷涂层研究现状与展望

  • 王伟志1,2, 马国政2, 韩珩1, 李洋3, 周雳4, 赵海朝4, 许建峰2, 郭伟玲2, 王海斗2,4
作者信息 +

Research Status and Prospect of Laser Cladding Ceramic Coatings

  • WANG Weizhi1,2, MA Guozheng2, HAN Heng1, LI Yang3, ZHOU Li4, ZHAO Haichao4, XU Jianfeng2, GUO Weiling2, WANG Haidou2,4
Author information +
文章历史 +

摘要

陶瓷材料具有高硬度、高熔点、高耐蚀等特性,常被应用于机械装备关键零部件的表面强化改性和再制造修复。随着装备服役工况日益苛刻,传统金属材料所制备的装备运动部件在服役过程中易于发生磨损、腐蚀、变形等失效,进而导致服役性能退化,严重时甚至引发装备恶性故障。激光熔覆作为一种高效的表面强化和再制造技术,在提升基材表面耐磨、耐蚀、耐热、抗高温氧化等性能方面具有重要应用前景。通过激光熔覆技术在零部件表面制备陶瓷涂层,对于延长关键零部件寿命、提高资源利用率、节约稀贵金属材料具有重要意义。首先按照陶瓷涂层的组织结构和成形机理对激光熔覆陶瓷涂层进行了分类介绍;然后结合激光熔覆制备陶瓷涂层的典型缺陷详细阐述了涂层质量优化的常用方法;而后综述了激光熔覆陶瓷涂层在提升零件耐腐蚀、耐磨损、耐高温性能和提高生物相容性等方面的应用情况;最后,总结了激光熔覆陶瓷涂层技术发展现状,并展望了激光熔覆陶瓷涂层技术的发展趋势。

Abstract

Ceramics materials have the characteristics of high hardness, high melting point, and high corrosion resistance. They are often used in the surface strengthening modification and remanufacturing repair of key parts of mechanical equipment. With the increasingly harsh service conditions of equipment, the moving parts of equipment made of traditional metal materials are prone to wear, corrosion, deformation, and other failures in the service process, which will lead to the degradation of service performance and even lead to malignant faults of equipment. As an efficient surface strengthening and remanufacturing technology, laser cladding has important application prospects in improving the wear resistance, corrosion resistance, heat resistance, and high-temperature oxidation resistance of substrate surface. The preparation of ceramic coating on the surface of parts by laser cladding technology is of great significance for prolonging the service life of key parts, improving resource utilization, and saving rare and precious metal materials. Firstly, laser cladding ceramic coatings are classified and introduced according to the microstructure and forming mechanism of ceramic coatings; Then, combined with the typical defects of the ceramic coating prepared by laser cladding, the common methods of coating quality optimization are described in detail; Then the application of laser cladding ceramic coating in improving the corrosion resistance, wear resistance, high-temperature resistance and biocompatibility of parts are reviewed; Finally, the development status of laser cladding ceramic coating technology is summarized, and the development trend of laser cladding ceramic coating technology prospects.

关键词

激光熔覆 / 陶瓷涂层 / 质量优化 / 功能涂层

Key words

laser cladding / ceramic coating / quality optimization / functional coating

引用本文

导出引用
王伟志, 马国政, 韩珩, 李洋, 周雳, 赵海朝, 许建峰, 郭伟玲, 王海斗. 激光熔覆陶瓷涂层研究现状与展望[J]. 机械工程学报, 2023, 59(7): 92-109 https://doi.org/10.3901/JME.2023.07.092
WANG Weizhi, MA Guozheng, HAN Heng, LI Yang, ZHOU Li, ZHAO Haichao, XU Jianfeng, GUO Weiling, WANG Haidou. Research Status and Prospect of Laser Cladding Ceramic Coatings[J]. Journal of Mechanical Engineering, 2023, 59(7): 92-109 https://doi.org/10.3901/JME.2023.07.092

参考文献

[1] 张文毓. 耐磨陶瓷涂层研究现状与应用[J]. 陶瓷,2013(11):12-15. ZHANG Wenyu. Research status and application of wear resistant ceramic coating[J]. Ceramics,2013(11):12-5.
[2] 张景德,尹衍升,李静,等. 陶瓷涂层材料的应用与发展[J]. 机械工程材料,2002(11):5-6. ZHANG Jingde,YIN Yansheng,LI Jing,et al. Application and development of ceramic coating materials[J]. Materials for Mechanical Engineering,2002(11):5-6+16.
[3] 姬梅梅,朱时珍,马壮. 航空航天用金属表面热防护涂层的研究进展[J]. 表面技术,2021,50(1):253-266. JI Meimei,ZHU Shizhen,MA Zhuang. Research progress of thermal protective coatings on metal surfaces used in aerospace[J]. Surface Technology,2021,50(1):253-266.
[4] 燕晓涛,吕耀辉,林建军,等. 高性能陶瓷涂层材料制备技术的综述[J]. 信息系统工程,2017(12):94-96. YAN Xiao Tao,LÜ Yaohui,LIN Jianjun,et al. Review on preparation technology of high-performance ceramic coating materials[J]. Information Systems Engineering,2017(12):94-96.
[5] 张继豪,宋凯强,张敏,等. 高性能陶瓷涂层及其制备工艺发展趋势[J]. 表面技术,2017,46(12):96-103. ZHANG Jihao,SONG Kaiqiang,ZHANG Min,et al. Development trend of high-performance ceramic coating and its preparation technology[J]. Surface Technology,2017,46(12):96-103.
[6] GAO Z,WANG L,WANG Y,et al. Crack defects and formation mechanism of FeCoCrNi high entropy alloy coating on TC4 titanium alloy prepared by laser cladding[J]. Journal of Alloys and Compounds,2022,903:163905.
[7] 杜学芸,许金宝,宋健. 激光熔覆再制造技术研究现状及发展趋势[J]. 表面工程与再制造,2020,20(6):18-22. DU Xueyun,XU Jinbao,SONG Jian. Research status and development trend of laser cladding remanufacturing technology[J]. Surface Engineering and Remanufacturing,2020,20(6):18-22.
[8] 李方义,李振,王黎明,等. 内燃机增材再制造修复技术综述[J]. 中国机械工程,2019,30(9):1119-1127. LI Fangyi,LI Zhen,WANG Liming,et al. Review of additive remanufacturing repair technology for internal combustion engine[J]. China Mechanical Engineering,2019,30(9):1119-1127.
[9] LIU Y,Ding Y,YANG L,et al. Research and progress of laser cladding on engineering alloys:A review[J]. Journal of Manufacturing Processes,2021,66:341-363.
[10] LER Y,SUN R,TANG Y,et al. Microstructure and phase transformations in laser clad CrxSy/Ni coating on H13 steel[J]. Optics and Lasers in Engineering,2015,66:181-186.
[11] 徐滨士,夏丹,谭君洋,等. 中国智能再制造的现状与发展[J]. 中国表面工程,2018,31(5):1-13. XU Binshi,XIA Dan,TAN Junyang,et al. Status and development of intelligent remanufacturing in China[J]. China Surface Engineering,2018,31(5):1-13.
[12] 徐滨士. 新时代中国特色再制造的创新发展[J]. 中国表面工程,2018,31(1):1-6. XU Binshi. Innovative development of remanufacturing with Chinese characteristics in the new era[J]. China Surface Engineering,2018,31(1):1-6.
[13] 徐滨士,李恩重,郑汉东,等. 我国再制造产业及其发展战略[J]. 中国工程科学,2017,19(3):61-65. Xu Binshi,LI Enzhong,ZHENG Handong,et al. Remanufacturing industry and its development strategy in China[J]. Engineering Science,2017,19(3):61-65.
[14] TOYSERKANI E,KHAJEPOUR A,CORBIN S F. Laser cladding[M]. Boca Raton:CRC Press,2004.
[15] 张万红. 激光熔覆陶瓷涂层的研究现状及发展[J]. 热加工工艺,2009,38(24):39-42. ZHANG Wanhong. Research status and development of laser cladding ceramic coatings[J]. Hot Working Technology,2009,38(24):39-42.
[16] MITTERER C,MAYRHOFER P H,BESCHLIESSER M,et al. Microstructure and properties of nanocomposite Ti-B-N and Ti-B-C coatings[J]. Surface and Coatings Technology,1999,120-121:405-411.
[17] CAI Y,LUO Z,FENG M,et al. The effect of TiC/Al2O3 composite ceramic reinforcement on tribological behavior of laser cladding Ni60 alloys coatings[J]. Surface and Coatings Technology,2016,291:222-229.
[18] GAO X,TIAN Z,LIU Z,et al. Interface characteristics of Al2O3-13%TiO2 ceramic coatings prepared by laser cladding[J]. Transactions of Nonferrous Metals Society of China,2012,22(10):2498-2503.
[19] MITTERER C,MAYRHOFER P H,BESCHLIESSER M,et al. Microstructure and properties of nanocomposite Ti-B-N and Ti-B-C coatings[J]. Surface and Coatings Technology,1999,120-121:405-411.
[20] 马宝霞,李金有. ZrC复相陶瓷表面等离子喷涂ZrB_2-SiC-ZrC陶瓷涂层的制备[J]. 材料保护,2019,52(11):91-96. MA Baoxia,LI Jinyou. Preparation of ZrB_2-SiC-ZrC ceramic coatings by plasma sspraying[J]. Journal of Materials Protection,2019,52(11):91-96.
[21] LI Z,WER M,XIAO K,et al. Microhardness and wear resistance of Al2O3-TiB2-TiC ceramic coatings on carbon steel fabricated by laser cladding[J]. Ceramics International,2019,45(1):115-121.
[22] WANG D,TIAN Z,WANG S,et al. Microstructural characterization of Al2O3-13wt.% TiO2 ceramic coatings prepared by squash presetting laser cladding on GH4169 superalloy[J]. Surface and Coatings Technology,2014,254:195-201.
[23] FAN P,ZHANG G. Study on process optimization of WC-Co50 cermet composite coating by laser cladding[J]. International Journal of Refractory Metals and Hard Materials,2020,87:105133.
[24] BUCHHOLZ S,FARHAT Z N,KIPOUROS G J,et al. The reciprocating wear behaviour of TiC-Ni3Al cermets[J]. International Journal of Refractory Metals and Hard Materials,2012,33:44-52.
[25] ALAM M S,DAS A K. Advancement in cermet based coating on steel substrate:A review[J]. Materials Today:Proceedings,2022,56:805-810.
[26] WANG X H,LIU A M. Microstructure and abrasive-wear behavior under high temperature of laser clad Ni-based WC ceramic coating[J]. Physics Procedia,2013,50:145-149.
[27] HU M,TANG J,CHEN X,et al. Microstructure and properties of WC-12Co composite coatings prepared by laser cladding[J]. Transactions of Nonferrous Metals Society of China,2020,30(4):1017-1030.
[28] JIN C,ONUOHA C C,FARHAT Z N,et al. Reciprocating wear behaviour of TiC-stainless steel cermets[J]. Tribology International,2017,105:250-263.
[29] 张蕾涛,刘德鑫,张伟樯,等. 钛合金表面激光熔覆涂层的研究进展[J]. 表面技术,2020,49(8):97-104. ZHANG Leitao,LIU Dexin,ZHANG Weiqiang,et al. Research progress of laser cladding coatings on Titanium alloy[J]. Surface Technology,2020,49(8):97-104.
[30] LIANG J,YIN X,LIN Z,et al. Microstructure and wear behaviors of laser cladding in-situ synthetic (TiBx+TiC)/(Ti2Ni+TiNi) gradient composite coatings[J]. Vacuum,2020,176.
[31] YANG Y,YAO W,ZHANG H. Phase constituents and mechanical properties of laser in-situ synthesized TiCN/TiN composite coating on Ti-6Al-4V[J]. Surface and Coatings Technology,2010,205(2):620-624.
[32] WU X. In situ formation by laser cladding of a TiC composite coating with a gradient distribution[J]. Surface and Coatings Technology,1999,115(2):111-115.
[33] YANG Y,YAN W,ZHANG D. Phase constituents and mechanical properties of laser in-situ synthesized TiCN/TiN composite coating on Ti-6Al-4V[J]. Surface and Coatings Technology,2010,205(2):620-624.
[34] YUE T M,HUANG K J,MAN H C. In situ laser cladding of Al2O3 bearing coatings on aluminium alloy 7075 for improvement of wear resistance[J]. Surface Engineering,2007,23(2):142-146.
[35] RICHARDSON P,CUSKELLY D,BRANDT M,et al. Microstructural analysis of in-situ reacted Ti2AlC MAX phase composite coating by laser cladding[J]. Surface and Coatings Technology,2020,385:125360.
[36] CHEN T,WU W,LI W,et al. Laser cladding of nanoparticle TiC ceramic powder:Effects of process parameters on the quality characteristics of the coatings and its prediction model[J]. Optics & Laser Technology,2019,116:345-355.
[37] KUMAR DAS A. Recent advancements in nanocomposite coating manufactured by laser cladding and alloying technique:A critical review[J]. Materials Today:Proceedings,2022,57:1852-1857.
[38] FABIJANIC T A,ALAR Ž,CORIC D. Influence of consolidation process and sintering temperature on microstructure and mechanical properties of near nano- and nano-structured WC-Co cemented carbides[J]. International Journal of Refractory Metals and Hard Materials,2016,54:82-89.
[39] LI W,XU P,WANG Y,et al. Laser synthesis and microstructure of micro- and nano-structured WC reinforced Co-based cladding layers on titanium alloy[J]. Journal of Alloys and Compounds,2018,749:10-22.
[40] FARAHMAND P,LIU S,ZHANG Z,et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International,2014,40(10,Part A):15421-15438.
[41] WANG D,TIAN Z,WANG S,et al. Preparation technology of nanometer ceramic particles reinforced metal-matrix graded coating by laser multi-layer cladding[J]. Applied Mechanics and Materials,2012,217-219:1006-1009.
[42] 周佳良,舒凤远,赵洪运,等. 激光熔覆在AlN陶瓷表面制备铜基金属覆层缺陷分析及控制[J]. 焊接学报,2019,40(11):133-138. ZHOU Jialiang,SHU Fengyuan,ZHAO Hongyun,et al. Analysis and control of defects of copper-based coatings prepared by laser cladding on AlN ceramic surface[J]. Transactions of the China Welding Institution,2019,40(11):133-138.
[43] GAO Y X,YI J Z,LEE P D,et al. A micro-cell model of the effect of microstructure and defects on fatigue resistance in cast aluminum alloys[J]. Acta Materialia,2004,52(19):5435-5449.
[44] 刘贵仲,钟文华,高原. 激光熔覆涂层缺陷的形成及防治[J]. 表面技术,2012,41(5):89-92. LIU Guizhong,ZHONG Wenhua,GAO Yuan. Formation and prevention of defects in laser cladding coatings[J]. Surface Technology,2012,41(5):89-92.
[45] 郭华锋,李志,熊永超,等. 激光熔覆成形Ni基合金层的缺陷分析及控制[J]. 热加工工艺,2008(19):126-129. GUO Huafeng,LI Zhi,XIONG Yongchao,et al. Defect analysis and control of Ni-base alloy layer formed by laser cladding[J]. Hot Working Technology,2008(19):126-9.
[46] ZENG C,TIAN W,LIAO W H,et al. Microstructure and porosity evaluation in laser-cladding deposited Ni-based coatings[J]. Surface and Coatings Technology,2016,294:122-130.
[47] FAN Q,CHEN C,FAN C,et al. Ultrasonic suppression of element segregation in gas tungsten arc cladding AlCoCuFeNi high-entropy alloy coatings[J]. Surface and Coatings Technology,2021,420:127364.
[48] BARR C,DA S,EASTO M,et al. Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels[J]. Surface and Coatings Technology,2018,340:126-136.
[49] FU F,ZHANG Y,CHANG G,et al. Analysis on the physical mechanism of laser cladding crack and its influence factors[J]. Optik,2016,127(1):200-202.
[50] TECHEL A,BERGE L,NOWOTNY S. Microstructure of advanced TiC-Based coatings prepared by laser cladding[J]. Journal of Thermal Spray Technology,2007,16(3):374-380.
[51] ZHU L,XUE P,LAN Q,et al. Recent research and development status of laser cladding:A review[J]. Optics & Laser Technology,2021,138:106915.
[52] ZHAO Y,GUAN C,CHEN L,et al. Effect of process parameters on the cladding track geometry fabricated by laser cladding[J]. Optik,2020,223:165447.
[53] CHEN L,YU T,CHEN X,et al. Process optimization,microstructure and microhardness of coaxial laser cladding TiC reinforced Ni-based composite coatings[J]. Optics & Laser Technology,2022,152:108129.
[54] ZHOU C,ZHAO S,WANG Y,et al. Mitigation of pores generation at overlapping zone during laser cladding[J]. Journal of Materials Processing Technology,2015,216:369-374.
[55] CHEN C,LIAN G,JIANG J,et al. Simplification and experimental investigation of geometrical surface smoothness model for multi-track laser cladding processes[J]. Journal of Manufacturing Processes,2018,36:621-628.
[56] DEVOJNO O G,FELDSHTEIN E,KARDAPOLAVA M A,et al. On the formation features,structure,microhardness and tribological behavior of single tracks and coating layers formed by laser cladding of Al-Fe powder bronze[J]. Surface and Coatings Technology,2019,358:195-206.
[57] RIQUELME A,RODRIGO P,ESCALER-RODRIGUEZ M D,et al. Analysis and optimization of process parameters in Al-SiCp laser cladding[J]. Optics and Lasers in Engineering,2016,78:165-173.
[58] LIU J,YU H,CHEN C,et al. Research and development status of laser cladding on magnesium alloys:A review[J]. Optics and Lasers in Engineering,2017,93:195-210.
[59] LINA G,LIU Z,ZHANG Y,et al. The forming control method of multi-track laser cladding on curved surface[J]. METALS,2020,10(8).
[60] LIAN G,YAO M,ZHANG Y,et al. Analysis and prediction on geometric characteristics of multi-track overlapping laser cladding[J]. International Journal of Advanced Manufacturing Technology,2018,97(5-8):2397-2407.
[61] CHEN T,WU W,LI W,et al. Laser cladding of nanoparticle TiC ceramic powder:Effects of process parameters on the quality characteristics of the coatings and its prediction model[J]. Optics & Laser Technology,2019,116:345-355.
[62] MARZBAN J,GHASEMINEJAD P,AHMADZADEH M H,et al. Experimental investigation and statistical optimization of laser surface cladding parameters[J]. International Journal of Advanced Manufacturing Technology,2015,76(5-8):1163-1172.
[63] HU Y,CONG W. A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites[J]. Ceramics International,2018,44(17):20599-20612.
[64] 周雳,邢志国,王海斗,等. 等离子喷涂金属/陶瓷梯度热障涂层研究进展[J]. 表面技术,2020,49(1):122-131. ZHOU Li,XING Zhiguo,WANG Haidou,et al. Research progress of plasma sprayed metal/ceramic gradient thermal barrier coatings[J]. Surface Technology,2020,49(1):122-131.
[65] LU M,MCCORMICK P,ZHAO Y,et al. Laser deposition of compositionally graded titanium oxide on Ti6Al4V alloy[J]. Ceramics International,2018,44(17):20851-20861.
[66] LIN Y,LER Y,LI X,et al. A study of TiB2/TiB gradient coating by laser cladding on titanium alloy[J]. Optics and Lasers in Engineering,2016,82:48-55.
[67] 刘海青,刘秀波,孟祥军,等. 金属基体激光熔覆陶瓷基复合涂层的裂纹成因及控制方法[J]. 材料导报,2013,27(11):60-63. LIU Haiqing,LIU Xiubo,MENG Xiangjun,et al. Crack formation,and control method of laser cladding ceramic matrix composite coating on metal matrix[J]. Materials Review,2013,27(11):60-63.
[68] ZANG C,WANG Y,ZHANG Y,et al. Microstructure and wear-resistant properties of NiCr-Cr3C2 coating with Ni45 transition layer produced by laser cladding[J]. Rare Metals,2015,34(7):491-497.
[69] WANG D,TIAN Z,SHEN L,et al. Preparation of thick ceramic coating by laser multi-layer cladding I-Crack control[J]. Advanced Materials Research,2013,785-786,901-905.
[70] WENG F,CHEN C,YU H. Research status of laser cladding on titanium and its alloys:A review[J]. Materials & Design,2014,58:412-425.
[71] 赵亚凡,陈传忠. 激光熔覆金属陶瓷涂层材料对裂纹的影响及控制[J]. 材料导报,2005(6):64-66. ZHAO Yafan,CHEN Chuanzhong. Influence of laser cladding cermet coating material on crack and its control[J]. Materials Review,2005(6):64-66.
[72] WANG Y,LIU X,LIU Y,et al. Microstructure and tribological performance of Ni60-based composite coatings on Ti6Al4V alloy with different Ti3SiC2 ceramic additions by laser cladding[J]. Ceramics International,2020,46(18,Part A):28996-29010.
[73] SHEN X,HE X,GAO L,et al. Study on crack behavior of laser cladding ceramic-metal composite coating with high content of WC[J]. Ceramics International,2022,48(12):17460-17470.
[74] QUAZI M M,FAZAL M A,HASEEB A S M A,et al. Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings:A review[J]. Journal of Rare Earths,2016,34(6):549-564.
[75] LIANG C J,WANG C L,ZHANG K X,et al. Nucleation and strengthening mechanism of laser cladding aluminum alloy by Ni-Cr-B-Si alloy powder based on rare earth control[J]. Journal of Materials Processing Technology,2021,294:117145.
[76] WANG D,LIANG E,Chao M,et al. Investigation on the microstructure and cracking susceptibility of laser-clad V2O5/NiCrBSiC alloy coatings[J]. Surface and Coatings Technology,2008,202(8):1371-1378.
[77] WANG C,GAO Y,ZENG Z,et al. Effect of rare-earth on friction and wear properties of laser cladding Ni-based coatings on 6063Al[J]. Journal of Alloys and Compounds,2017,727:278-285.
[78] YANAN L,RONGLU S,WEI N,et al. Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings[J]. Optics and Lasers in Engineering,2019,120:84-94.
[79] CONG W,NING F. A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping of stainless steel[J]. International Journal of Machine Tools and Manufacture,2017,121:61-69.
[80] LIU X,OSAWA Y,TAKAMOR S,et al. Microstructure and mechanical properties of AZ91 alloy produced with ultrasonic vibration[J]. Materials Science and Engineering:A,2008,487(1):120-123.
[81] ZHANG M,ZHAO G L,WANG X H,et al. Microstructure evolution and properties of in-situ ceramic particles reinforced Fe-based composite coating produced by ultrasonic vibration assisted laser cladding processing[J]. Surface and Coatings Technology,2020,403:126445.
[82] LI M,HAN B,WANG Y,et al. Investigation on laser cladding high-hardness nano-ceramic coating assisted by ultrasonic vibration processing[J]. Optik,2016,127(11):4596-4600.
[83] WU D,GUO M,MA G,et al. Dilution characteristics of ultrasonic assisted laser clad yttria-stabilized zirconia coating[J]. Materials Letters,2015,141:207-209.
[84] LI M,ZHANG Q,HAN B,et al. Microstructure and property of Ni/WC/La2O3 coatings by ultrasonic vibration-assisted laser cladding treatment[J]. Optics and Lasers in Engineering,2020,125:105848.
[85] ZHAI L L,BAN C Y,ZHANG J W. Microstructure,microhardness and corrosion resistance of NiCrBSi coatings under electromagnetic field auxiliary laser cladding[J]. Surface and Coatings Technology,2019,358:531-538.
[86] HU Y,WANG L,YAO J,et al. Effects of electromagnetic compound field on the escape behavior of pores in molten pool during laser cladding[J]. Surface and Coatings Technology,2020,383:125198.
[87] ZHANG Q,ZHANG P,YAN H,et al. Magnetic-field-assisted laser cladding in the preparation of a crack-free Fe-Cr-Mo-C-Y-B amorphous coating on steel[J]. PHILOSOPHICAL MAGAZINE LETTERS,2020,100(2):86-93.
[88] ZHAI L L,BAN C Y,ZHANG J W. Investigation on laser cladding Ni-base coating assisted by electromagnetic field[J]. Optics & Laser Technology,2019,114:81-88.
[89] ZHOU S,ZENG X,HU Q,et al. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization[J]. Applied Surface Science,2008,255(5,Part 1):1646-1653.
[90] JANG J,CHIU Y. Numerical and experimental thermal analysis for a metallic hollow cylinder subjected to step-wise electro-magnetic induction heating[J]. Applied Thermal Engineering,2007,27(11):1883-1894.
[91] BIDRON G,DOGHRI A,MALOT T,et al. Reduction of the hot cracking sensitivity of CM-247LC superalloy processed by laser cladding using induction preheating[J]. Journal of Materials Processing Technology,2020,277:116461.
[92] ZHOU S,HUANG Y,ZENG X,et al. Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding[J]. Materials Science and Engineering:A,2008,480(1):564-572.
[93] WANG Q,XI Y,ZHAO Y,et al. Effects of laser re-melting and annealing on microstructure,mechanical property and corrosion resistance of Fe-based amorphous/crystalline composite coating[J]. Materials Characterization,2017,127:239-247.
[94] GAO W,ZHAO S,WANG Y,et al. Effect of re-melting on the cladding coating of Fe-based composite powder[J]. Materials & Design,2014,64:490-496.
[95] MA Q,LI Y,WANG J,et al. Homogenization of carbides in Ni60/WC composite coatings made by fiber laser remelting[J]. Materials and Manufacturing Processes,2015,30(12):1417-1424.
[96] ZHOU S,XU Y,LIAO B,et al. Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding[J]. Optics & Laser Technology,2018,103:8-16.
[97] XU P,LIN C,ZHOU C,et al. Wear and corrosion resistance of laser cladding AISI 304 stainless steel/Al2O3 composite coatings[J]. Surface and Coatings Technology,2014,238:9-14.
[98] XU P,LIN C,ZHOU C,et al. Wear and corrosion resistance of laser cladding AISI 304 stainless steel/Al2O3 composite coatings[J]. Surface and Coatings Technology,2014,238:9-14.
[99] ABIOYE T E,FARAYIBI P K,MCCARTNEY D G,et al. Effect of carbide dissolution on the corrosion performance of tungsten carbide reinforced Inconel 625 wire laser coating[J]. Journal of Materials Processing Technology,2016,231:89-99.
[100] ZHANG Z,YU T,KOVACEVIC R. Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VC[J]. Applied Surface Science,2017,410:225-240.
[101] SOLEIMANIPOUR Z,BAGHSHAHI S,SHOJA-RAZAV R,et al. Hot corrosion behavior of Al2O3 laser clad plasma sprayed YSZ thermal barrier coatings[J]. Ceramics International,2016,42(15):17698-17705.
[102] DIAO Y,ZHANG K. Microstructure and corrosion resistance of TC2 Ti alloy by laser cladding with Ti/TiC/TiB2 powders[J]. Applied Surface Science,2015,352:163-168.
[103] BALYANOV A,KUTNYAKOVA J,AMIRKHANOVA N A,et al. Corrosion resistance of ultra fine-grained Ti[J]. Scripta Materialia,2004,51(3):225-229.
[104] XU Z,WANG Z,CHEN J,et al. Effect of rare earth oxides on microstructure and corrosion behavior of laser-cladding coating on 316L stainless steel[J]. Coatings,2019,9(10):636.
[105] 路世盛,周健松,王凌倩,等. 钛合金表面激光熔覆陶瓷涂层的研究进展[J]. 表面技术,2019,48(11):82-90. LU Shisheng,ZHOU Jiansong,WANG Lingqian,et al. Research progress of laser cladding ceramic coating on titanium alloy surface[J]. Surface Technology,2019,48(11):82-90.
[106] GUO C,ZHOU J,CHEN J,et al. High temperature wear resistance of laser cladding NiCrBSi and NiCrBSi/WC-Ni composite coatings[J]. Wear,2011,270(7):492-498.
[107] CHEN Z,YAN H,ZHANG P,et al. Microstructural evolution and wear behaviors of laser-clad Stellite 6/NbC/h-BN self-lubricating coatings[J]. Surface and Coatings Technology,2019,372:218-228.
[108] TORRES H,VUCHKOV T,RODRIGUEZ RIPOLL M,et al. Tribological behaviour of MoS2-based self-lubricating laser cladding for use in high temperature applications[J]. Tribology International,2018,126:153-165.
[109] TORRES H,SLAWIKlK S,GACHOT C,et al. Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications[J]. Surface and Coatings Technology,2018,337:24-34.
[110] QU C C,LI J,JUAN Y F,et al. Effects of the content of MoS2 on microstructural evolution and wear behaviors of the laser-clad coatings[J]. Surface and Coatings Technology,2019,357:811-821.
[111] TAO W,NING W,YANG L,et al. Study on preparation technologies of thermal barrier coatings[J]. Surface Review and Letters,2017,24(4).
[112] AFRASISBI A,SAREMI M,KOBAYASHI A. A comparative study on hot corrosion resistance of three types of thermal barrier coatings:YSZ,YSZ+Al2O3 and YSZ/Al2O3[J]. Materials Science and Engineering:A,2008,478(1):264-269.
[113] YANG X,ZHANG J,LU Z,et al. Removal and repair techniques for thermal barrier coatings:A review[J]. Transactions of the Institute of Metal Finishing. 2020,98(3):121-128.
[114] 陈守东. MCrAlY粘结层的微观组织及制备方法研究进展[J]. 材料导报,2019,33(15):2582-2588. CHEN Shoudong. Research progress on microstructure and preparation methods for MCrAlY bond coats[J]. Materials Review,2019,33(15):2582-2588.
[115] HUANG K J,LI W,PAN K,et al. High temperature oxidation and thermal shock properties of La2Zr2O7 thermal bbarrier coatings deposited on Nickel-based superalloy by laser-cladding[J]. Coatings,2020,10(4):370.
[116] SONG M,GUO H,ABBAS M,et al. Thermal deformation of Y2O3 partially stabilized ZrO2 coatings by digital image correlation method[J]. Surface and Coatings Technology,2013,216:1-7.
[117] SOLEIMANIPOUR Z,BAGHSHAHI S,SHOIA-RAZAVI R. Improving the thermal shock resistance of thermal barrier coatings through formation of an in situ YSZ/Al2O3 composite via laser cladding[J]. Journal of Materials Engineering and Performance,2017,26(4):1890-1899.
[118] LI H C,WANG D G,CHEN C Z,et al. Effect of CeO2 and Y2O3 on microstructure,bioactivity and degradability of laser cladding CaO-SiO2 coating on titanium alloy[J]. Colloids and Surfaces B:Biointerfaces,2015,127:15-21.
[119] WANG Y,LI Y,YU H,et al. In situ fabrication of bioceramic composite coatings by laser cladding[J]. Surface and Coatings Technology,2005,200(7):2080-2084.
[120] LI H C,WANG D G,HU C,et al. Microstructure,mechanical and biological properties of laser cladding derived CaO-SiO2-MgO system ceramic coatings on titanium alloys[J]. Applied Surface Science,2021,548:149296.
[121] XU X,HAN J G,WANG C M,et al. Laser cladding of composite bioceramic coatings on Titanium alloy[J]. Journal of Materials Engineering and Performance,2016,25(2):656-667.
[122] CHIEN C S,LIAO T Y,HONG T F,et al. Investigation into microstructural properties of fluorapatite Nd-YAG laser clad coatings with PVA and WG binders[J]. Surface and Coatings Technology,2011,205(10):3141-3146.
[123] ING Z,CAO Q,JUN H. Corrosion,wear and biocompatibility of hydroxyapatite bio-functionally graded coating on titanium alloy surface prepared by laser cladding[J]. Ceramics International,2021,47(17):24641-24651.
[124] MORKS M F,KOBAYASHI A. Development of ZrO2/SiO2 bioinert ceramic coatings for biomedical application[J]. Journal of the Mechanical Behavior of Biomedical Materials,2008,1(2):165-171.
[125] CHEN T,DENG Z,LIU D,et al. Bioinert TiC ceramic coating prepared by laser cladding:Microstructures,wear resistance,and cytocompatibility of the coating[J]. Surface and Coatings Technology,2021,423:127635.
PDF(1135 KB)

870

Accesses

0

Citation

Detail

段落导航
相关文章

/