选择性激光熔化制造金属构件残余应力的研究进展

doi:10.11973/jxgccl201808001

PDF(848 KB)

机械工程材料 ›› 2018, Vol. 42 ›› Issue (8) : 1-6. DOI: 10.11973/jxgccl201808001

扫码查看或转发全文

综述

选择性激光熔化制造金属构件残余应力的研究进展

李九霄, 李鸣佩, 杨东野, 何博

作者信息 +

Research Progress on Residual Stress in Metal Component Manufactured by Selective Laser Melting

LI Jiuxiao, LI Mingpei, YANG Dongye, HE Bo

Author information +

文章历史 +

摘要

残余应力是导致选择性激光熔化（SLM）制造金属构件失效的关键因素之一。介绍了SLM制造过程中残余应力的产生机制和检测方法，综述了SLM工艺参数对残余应力的影响，展望了SLM制造构件残余应力研究的未来方向。

Abstract

Residual stress is one of the key factors leading to the failure of metal components manufactured by selective laser melting (SLM). The generation mechanism and the testing methods of residual stress during SLM manufacturing are described; the influence of SLM process parameters on residual stress is summarized; the future direction of residual stress research of SLM manufactured components is prospected.

导出引用

李九霄, 李鸣佩, 杨东野, 何博. 选择性激光熔化制造金属构件残余应力的研究进展[J]. 机械工程材料, 2018, 42(8): 1-6 https://doi.org/10.11973/jxgccl201808001

LI Jiuxiao, LI Mingpei, YANG Dongye, HE Bo. Research Progress on Residual Stress in Metal Component Manufactured by Selective Laser Melting[J]. Materials For Mechanical Engineering, 2018, 42(8): 1-6 https://doi.org/10.11973/jxgccl201808001

参考文献

[1] SING S L, AN J, YEONG W Y, et al. Laser and electron-beam powder-bed additive manufacturing of metallic implants:A review on processes, materials and designs[J]. Journal of Orthopaedic Research, 2016, 34(3):369-385.
[2] GIBSON I, ROSEN D W, STUCKER B. Additive manufacturing technologies:Rapid prototyping to direct digital manufacturing[M]. Boston:Springer, 2010:30-35.
[3] 刘威,刘婷婷,廖文和, 等. 选择性激光熔融钴铬合金成形工艺研究[J]. 中国激光, 2015, 42(5):0503001.
[4] CHUA C K, WONG C H, YEONG W Y. Standards, quality control, and measurement sciences in 3D printing and additive manufacturing[M].[S.l.]:Elsevier Ltd., 2017:1-12.
[5] 肖振楠,刘婷婷,廖文和, 等. 激光选区熔化成形TC4钛合金热处理后微观组织和力学性能[J]. 中国激光, 2017, 44(9):0902001.
[6] LI Y, ZHOU K, TAN P, et al. Modeling temperature and residual stress fields in selective laser melting[J]. International Journal of Mechanical Sciences, 2018, 136:24-35.
[7] DEBROY T, WEI H L, ZUBACK J S, et al. Additive manufacturing of metallic components:Process, structure and properties[J].Progress in Materials Science,2018,92:112-224.
[8] WITHERS P J, BHADESHIA H. Residual stress. Part 2-Nature and origins[J]. Materials Science and Technology, 2001, 17(4):366-375.
[9] LEUDERS S, THÖNE M, RIEMER A, et al. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting:Fatigue resistance and crack growth performance[J]. International Journal of Fatigue, 2013, 48:300-307.
[10] SALMI A, ATZENI E. History of residual stresses during the production phases of AlSi10Mg parts processed by powder bed additive manufacturing technology[J]. Virtual and Physical Prototyping, 2017, 12(2):153-160.
[11] LIU M Z, XIONG L S, LIN B. An approach of tool-chip friction coefficient estimate for the simulation of machining residual stress[J]. Advanced Materials Research, 2012, 510:827-834.
[12] KHURSHID M, LEITNER M, BARSOUM Z, et al. Residual stress state induced by high frequency mechanical impact treatment in different steel grades:Numerical and experimental study[J]. International Journal of Mechanical Sciences, 2017, 123:34-42.
[13] 王秋成. 航空铝合金残余应力消除及评估技术研究[D]. 杭州:浙江大学, 2003:6-8.
[14] CASAVOLA C, CAMPANELLI S L, PAPPALETTERE C. Experimental analysis of residual stresses in the selective laser melting process[C]//Proccedings of the XIth International Congress and Exposition. Orlando, Florida:Society for Experimental Mechanics Inc., 2008, 68:95-99.
[15] WITHERS P J, BHADESHIA H. Residual stress. Part 1-Measurement techniques[J]. Materials Science and Technology, 2001, 17(4):355-365.
[16] MERCELIS P, KRUTH J P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 2006, 12(5):254-265.
[17] 杨健, 黄卫东, 陈静, 等. 激光快速成形金属零件的残余应力[J]. 应用激光, 2004, 24(1):5-8.
[18] PUYMBROECK E V, NAGY W, FANG H, et al. Determination of residual weld stresses with the incremental hole-drilling method in tubular steel bridge joints[J]. Procedia Engineering, 2018, 213:651-661.
[19] LE ROUX S, SALEM M, HOR A. Improvement of the bridge curvature method to assess residual stresses in selective laser melting[J]. Additive Manufacturing, 2018, 22:320-329.
[20] DREIER S, DENKENA B. Determination of residual stresses in plate material by layer removal with machine-integrated measurement[J]. Procedia CIRP, 2014, 24:103-107.
[21] AHMED I I, ADEBISI J A, ABDULKAREEM S, et al. Investigation of surface residual stress profile on martensitic stainless steel weldment with X-ray diffraction[J]. Journal of King Saud University (Engineering Sciences), 2018, 30(2):183-187.
[22] OLIVEIRA J P, FERNANDES F M B, MIRANDA R M, et al. Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction[J]. Materials & Design, 2016, 100:180-187.
[23] JIANG W, CHEN W, WOO W, et al. Effects of low-temperature transformation and transformation-induced plasticity on weld residual stresses:Numerical study and neutron diffraction measurement[J]. Materials & Design, 2018, 147:65-79.
[24] RABUNG M, ALTPETER I, BOLLER C, et al. Non-destructive evaluation of the micro residual stresses of Ⅲrd order by using micro magnetic methods[J]. NDT & E International, 2014, 63:7-10.
[25] ZHAN Y, LIU C, KONG X, et al. Experiment and numerical simulation for laser ultrasonic measurement of residual stress[J]. Ultrasonics, 2017, 73:271-276.
[26] 王庆明, 孙渊. 残余应力测试技术的进展与动向[J]. 机电工程, 2011, 28(1):11-15.
[27] SIMSON T, EMMEL A, DWARS A, et al. Residual stress measurements on AISI 316L samples manufactured by selective laser melting[J]. Additive Manufacturing, 2017, 17:183-189.
[28] CHENG B, SHRESTHA S, CHOU K. Stress and deformation evaluations of scanning strategy effect in selective laser melting[J]. Additive Manufacturing, 2016, 12:240-251.
[29] MUGWAGWAA L, DIMITROVA D, MATOPEA S, et al. Influence of process parameters on residual stress related distortions in selective laser melting[J]. Procedia Manufacturing, 2018, 21:92-99.
[30] NGUYEN Q B, LUU D N, NAI S M L, et al. The role of powder layer thickness on the quality of SLM printed parts[J]. Archives of Civil and Mechanical Engineering, 2018, 18(3):948-955.
[31] KHAIRALLAH S A, ANDERSON A. Mesoscopic simulation model of selective laser melting of stainless steel powder[J]. Journal of Materials Processing Technology, 2014,214(11):2627-2636.
[32] LI X P, KANG C W, HUANG H, et al. The role of a low-energy-density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting[J]. Materials & Design, 2014, 63:407-411.
[33] BRVCKNER F, LEPSKI D, BEYER E. Modeling the influence of process parameters and additional heat sources on residual stresses in laser cladding[J]. Journal of Thermal Spray Technology, 2007, 16(3):355-373.
[34] LIVERANI E, TOSCHI S, CESCHINI L, et al. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel[J]. Journal of Materials Processing Technology, 2017, 249:255-263.
[35] LOH L E, CHUA C K, YEONG W Y, et al. Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061[J]. International Journal of Heat and Mass Transfer, 2015, 80:288-300.
[36] LI Y, GU D. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder[J]. Materials & Design, 2014, 63:856-867.
[37] FU C H, GUO Y B. Three-dimensional temperature gradient mechanism in selective laser melting of Ti-6Al-4V[J]. Journal of Manufacturing Science and Engineering, 2014, 136(6):061004.
[38] 龚丞, 王丽芳, 朱刚贤, 等. 激光增材制造工艺参数对熔覆层残余应力影响[J/OL]. 激光技术:1-10[2018-04-08].http://kns.cnki.net/kcms/detail/51.1125.TN.20180605.1722.004.html.
[39] MANVATKAR V, DE A, DEBROY T. Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process[J]. Materials Science and Technology, 2015, 31(8):924-930.
[40] HUSSEIN A, HAO L, YAN C, et al. Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting[J]. Materials & Design, 2013, 52:638-647.
[41] POHL H, SIMCHI A, ISSA M, et al. Thermal stresses in direct metal laser sintering[C]//Proceedings of the 12th Solid Freeform Fabrication Symposium. Austin, TX:[s.n.], 2001,60:78-85.
[42] NADAMMAL N, CABEZA S, MISHUROVA T, et al. Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718[J]. Materials & Design, 2017, 134:139-150.
[43] VAN BELLE L, VANSTEENKISTE G, BOYER J C. Investigation of residual stresses induced during the selective laser melting process[J].Key Engineering Materials, 2013, 554:1828-1834.
[44] QIU C, ADKINS N J E, ATTALLAH M M. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V[J]. Materials Science and Engineering:A, 2013, 578:230-239.
[45] ZAEH M F, BRANNER G. Investigations on residual stresses and deformations in selective laser melting[J]. Production Engineering, 2010, 4(1):35-45.
[46] KRUTH J P, FROYEN L, VAN VAERENBERGH J, et al. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 2004, 149(1/2/3):616-622.
[47] PARRY L, ASHCROFT I A, WILDMAN R D. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation[J]. Additive Manufacturing, 2016, 12:1-15.
[48] CATCHPOLE-SMITH S, ABOULKHAIR N, PARRY L, et al. Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys[J]. Additive Manufacturing, 2017, 15:113-122.
[49] NICKEL A H, BARNETT D M, PRINZ F B. Thermal stresses and deposition patterns in layered manufacturing[J]. Materials Science and Engineering:A,2001,317(1/2):59-64.
[50] QIAN B, SHI Y S, WEI Q S, et al. The helix scan strategy applied to the selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 2012, 63(5/6/7/8):631-640.
[51] VORA P, MUMTAZ K, TODD I, et al. AlSi12 in-situ alloy formation and residual stress reduction using anchorless selective laser melting[J]. Additive Manufacturing, 2015, 7:12-19.
[52] ALI H, GHADBEIGI H, MUMTAZ K. Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V[J]. Materials Science and Engineering:A, 2018, 712:175-187.
[53] 刘延辉,瞿伟成,朱小刚,等. 激光3D打印TC4钛合金工件根部裂纹成因分析[J]. 理化检验-物理分册,2016, 52(10):682-685.
[54] ABE F, OSAKADA K, SHIOMI M, et al. The manufacturing of hard tools from metallic powders by selective laser melting[J]. Journal of Materials Processing Technology, 2001, 111(1/2/3):210-213.
[55] OSAKADA K, SHIOMI M. Flexible manufacturing of metallic products by selective laser melting of powder[J]. International Journal of Machine Tools and Manufacture,2006,46(11):1188-1193.