误差交互作用对齿轮分扭传动系统静力学均载特性的影响研究

doi:10.16578/j.issn.1004.2539.2021.05.001

PDF(7972 KB)

机械传动 ›› 2021, Vol. 45 ›› Issue (5) : 1-9. DOI: 10.16578/j.issn.1004.2539.2021.05.001

扫码查看或转发全文

理论研究

误差交互作用对齿轮分扭传动系统静力学均载特性的影响研究

王祁波¹, 丁景伟², 靳广虎², 朱如鹏²

作者信息 +

Research on the Influence of the Interaction between Errors on the Statics Load Sharing Characteristic of Gear Split Torque Transmission System

Wang Qibo¹, Ding Jingwei², Jin Guanghu², Zhu Rupeng²

Author information +

文章历史 +

摘要

为进一步掌握误差与分扭传动系统均载性能间的关系，针对单输入双输出齿轮分扭传动系统，建立了静力学模型和方程，研究了误差间交互作用对系统静力学均载系数的影响，并开展了基于交互作用的正交试验参数匹配分析。结果表明，部分齿侧间隙间存在交互作用；任意两中心距误差间均存在交互作用；通过基于交互作用的参数匹配分析，可获得有助于改善系统均载性能的误差最优组合方式。

Abstract

In order to further understand the relationship between the errors and the load sharing performance of the split torque transmission system, the static model and equation of the system are established for the single input double output gear split torque transmission system. The influence of the interaction between errors on the statics load sharing coefficient of the system is studied, and the orthogonal experiment parameter matching analysis based on the interaction is carried out. The results show that there is interaction between partial backlash and between any two center distance errors, and the optimal combination mode can be obtained to improve the load sharing performance of the system through the parameter matching analysis based on interaction.

导出引用

王祁波, 丁景伟, 靳广虎, 朱如鹏. 误差交互作用对齿轮分扭传动系统静力学均载特性的影响研究[J]. 机械传动, 2021, 45(5): 1-9 https://doi.org/10.16578/j.issn.1004.2539.2021.05.001

Wang Qibo, Ding Jingwei, Jin Guanghu, Zhu Rupeng. Research on the Influence of the Interaction between Errors on the Statics Load Sharing Characteristic of Gear Split Torque Transmission System[J]. Journal of Mechanical Transmission, 2021, 45(5): 1-9 https://doi.org/10.16578/j.issn.1004.2539.2021.05.001

参考文献

[1] WHITE G.A lightweight split-torque transmission for a 330 kW helicopter[J].Proceedings of the Institution of Mechanical Engineers, 1982, 196(1):11-22.
[2] WHITE G.Design study of a 375 kW helicopter transmission with split-torque epicyclic and bevel drive stages[J].Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 1983, 197(4):213-224.
[3] WHITE G.A 2400kW lightweight helicopter transmission with splittorque gear trains[C]//Proceedings of the Design Engineering Technical Conference, Octber 7-10, 1984, Combridge.New York:ASME, 1984:1-16.
[4] WHITE G.The 3600 hp split-torque helicopter transmission[R].Washington.D.C.:NASA Contract Report 174932, 1985:1-95.
[5] WHITE G.Split torque helicopter transmissions with widely separated engines[J].Proceedings of the Institution of Mechanical Engineers, Part G:Journal of Aerospace Engineering, 1989, 203(1):53-65.
[6] RASHIDI Majid, KRANTZ Timothy.Dynamics of a split torque helicopter transmission[J].Scottsdale:Arizona.NASA Lewis Research Center, the American Society of Mechanical Engineers, 1992:347-358.
[7] KRANTZ T L.Dynamics of a split torque helicopter transmission[R].NASA TM-106410, 1994:1-69.
[8] KRANTZ T L, RASHIDI M, KISH J G.Split torque transmission load sharing[J].Proceedings of the Institution of Mechanical Engineers, Part G:Journal of Aerospace Engineering, 1994, 208(2):137-148.
[9] KRANTZ T L.A method to analyze and optimize the load sharing of split path transmissions[R].Washington.D.C.:NASA Technical Memorandum, 1996:1-21.
[10] WHITE G.Design study of a split-torque helicopter transmission[J].Proceedings of the Institution of Mechanical Engineers, Part G:Journal of Aerospace Engineering, 1998, 212(2):117-123.
[11] GMIRYA Y, HE S, BUZEL G, et al.Load sharing test of the CH-53K split torque main gearbox[C]//The American Helicopter Society 65th Annual Forum, May 27-29, 2009, Grapevine, Texas, US.Fairfax:American Helicopter Society, 2009:977-986.
[12] GMIRYA Y, ALULIS M, PALCIC P, et al.Design and development of a modern transmission baseline configuration of the CH-53K drive system[C]//The American Helicopter Society 67th Annual Forum, May 3-5, 2011, Virginia Beach, VA, US.Fairfax:American Helicopter Society, 2011:2323-2334.
[13] 赵宁, 王锐锋, 贾清健, 等.平行轴分扭传动系统均载研究[J].机械传动, 2013, 37(5):13-16.ZHAO Ning, WANG Ruifeng, JIA Qingjian, et al.Study on load sharing of parallel shaft split torque transmission system[J].Journal of Mechanical Transmission, 2013, 37(5):13-16.
[14] 赵宁, 王锐锋, 贾清健.面齿轮分扭传动系统均载研究[J].机械传动, 2013, 37(12):5-8.ZHAO Ning, WANG Ruifeng, JIA Qingjian.Research on load sharing of face gear split torsion transmission system[J].Journal of Mechanical Transmission, 2013, 37(12):5-8.
[15] 赵宁, 付晨曦, 赵永志, 等.基于动力学的分扭传动系统均载特性分析[J].机械传动, 2014, 38(11):22-25.ZHAO Ning, FU Chenxi, ZHAO Yongzhi, et al.Load sharing characteristics analysis of torque splitting transmission system based on dynamics[J].Journal of Mechanical Transmission, 2014, 38(11):22-25.
[16] 林何, 王三民.参数对分扭-并车齿轮传动系统动载和均载特性的影响[J].机械传动, 2019, 43(5):18-22.LIN He, WANG Sanmin.Influence of parameters on dynamic and load sharing characteristics of split and parallel gear transmission system[J]. Journal of Mechanical Transmission, 2019, 43(5):18-22.
[17] 靳广虎, 徐鑫涛, 朱如鹏.齿轮分扭传动的均载行为机理及参数匹配分析[J].航空动力学报, 2020, 35(11):2306-2315.JIN Guanghu, XU Xintao, ZHU Rupeng.Load sharing mechanism and parameter matching analysis of gear split torsional transmission[J].Journal of Aerospace Power, 2020, 35(11):2306-2315.
[18] 龙珊珊, 朱如鹏, 靳广虎.单输入齿轮分扭传动系统动态均载的刚度敏感性分析[J].机械制造与自动化, 2018, 47(4):58-62.LONG Shanshan, ZHU Rupeng, JIN Guanghu.Stiffness sensitivity analysis of dynamic load sharing of single input gear split torque transmission system[J].Machine Building and Automation, 2018, 47(4):58-62.
[19] 王祁波, 唐进元, 谭武中, 等.两分支圆柱齿轮分扭传动系统的均载性能[J].航空动力学报, 2019, 34(7):1598-1606.WANG Qibo, TANG Jinyuan, TAN Wuzhong, et al.Load sharing performance of two branch cylindrical gear split torsion transmission system[J].Journal of Aerospace Power, 2019, 34(7):1598-1606.
[20] 靳广虎, 任薇, 朱如鹏.扭转刚度对功率分流传动系统均载特性的影响[J].航空动力学报, 2019, 34(11):2478-2489.JIN Guanghu, REN Wei, ZHU Rupeng.Effect of torsional stiffness on load sharing characteristics of power split transmission system[J].Journal of Aerospace Power, 2019, 34(11):2478-2489.
[21] 靳广虎, 高鹏, 周镇宇, 等.两次载荷分流齿轮传动构型的静力学均载特性[J].航空动力学报, 2020, 35(10):2104-2114.JIN Guanghu, GAO Peng, ZHOU Zhenyu, et al.Static load sharing characteristics of two load split gear transmission configuration[J].Journal of Aerospace Power, 2020, 35(10):2104-2114.
[22] 唐贤炬.双输入圆柱齿轮动力分流传动系统的静力学均载特性研究[J].机械传动, 2016, 40(8):43-49.TANG Xianju.Research on static load sharing characteristics of double input cylindrical gear power split transmission system[J].Journal of Mechanical Transmission, 2016, 40(8):43-49.
[23] 董金城, 王三民, 林何, 等.参数对二分支斜齿轮传动动载和均载特性影响[J].航空动力学报, 2015, 30(5):1260-1266.DONG Jincheng, WANG Sanmin, LIN He, et al.Influence of parameters on dynamic load and load sharing characteristics of two branch helical gear transmission[J].Journal of Aerospace Power, 2015, 30(5):1260-1266.