用于Q235低碳钢的数字图像相关法应变检测

张德海, 郭照灿, 何文斌, 陈保家

锻压技术 ›› 2022, Vol. 47 ›› Issue (3) : 182-190.

PDF(2589 KB)
PDF(2589 KB)
锻压技术 ›› 2022, Vol. 47 ›› Issue (3) : 182-190. DOI: 10.13330/j.issn.1000-3940.2022.03.031
测试技术

用于Q235低碳钢的数字图像相关法应变检测

  • 张德海1, 郭照灿1, 何文斌1, 陈保家2
作者信息 +

Strain detection by digital image correlation method on Q235 low carbon steel

  • ZHANG Dehai1, GUO Zhaocan1, HE Wenbin1, CHEN Baojia2
Author information +
文章历史 +

摘要

为解决传统应变检测方法中存在的测量结果精度低、容易改变试样的力学性能、无法实现全场变形测量等问题,采用数字图像相关法对Q235低碳钢的力学性能进行研究,将拉伸试验结果与ABAQUS数值模拟结果进行对比分析,通过引入差值系数来研判各力学参数模拟结果的精度。结果表明:模拟所得应变分布数值与数字图像相关法所得结果吻合较好,且最大主应变值的吻合度最高;屈服强度和抗拉强度的差值系数均小于1.000%,且抗拉强度的差值系数最小,为0.011%;伸长率和断面收缩率的差值系数较大,其中伸长率的差值系数最大,为2.054%。对比结果表明:数字图像相关法应用于Q235低碳钢的变形及应变的测量是真实有效的,同时,该方法为其他材料的变形测量提供了借鉴。

Abstract

In order to solve the problems existing in traditional strain detection method, such as low accuracy of measurement results, easy to change the mechanical properties of samples, and inability to realize full-field deformation measurement, the mechanical properties of Q235 low carbon steel were studied by digital image correlation method. Then, the tensile test results were compared and analyzed with the numerical simulation results of ABAQUS, and the accuracy of simulation results for various mechanical parameters was evaluated by introducing the difference coefficient. The results show that the strain distribution values obtained by the simulation are in good agreement with those obtained by the digital image correlation method, and the maximum principal strain values have the highest agreement. The difference coefficients of yield strength and tensile strength are all less than 1.000%, and the difference coefficient of tensile strength is the smallest, which is 0.011%, the differences coefficients of elongation and area reduction are larger, and the difference coefficient of elongation is the biggest, which is 2.054%. The comparison results show that the digital image correlation method is really effective in the deformation and strain measurement of Q235 low carbon steel, which provides a reference for the deformation measurement of other materials.

关键词

数字图像相关法 / Q235低碳钢 / 应变检测 / 力学性能 / 差值系数

Key words

digital image correlation method / Q235 low carbon steel / strain detection / mechanical property / difference coefficient

引用本文

导出引用
张德海, 郭照灿, 何文斌, 陈保家. 用于Q235低碳钢的数字图像相关法应变检测[J]. 锻压技术, 2022, 47(3): 182-190 https://doi.org/10.13330/j.issn.1000-3940.2022.03.031
ZHANG Dehai, GUO Zhaocan, HE Wenbin, CHEN Baojia. Strain detection by digital image correlation method on Q235 low carbon steel[J]. Forging & Stamping Technology, 2022, 47(3): 182-190 https://doi.org/10.13330/j.issn.1000-3940.2022.03.031

参考文献

[1] 潘兵,吴大方,高镇同.基于数字图像相关方法的非接触高温热变形测量系统[J].航空学报,2010,31(10):1960-1967.Pan B,Wu D F,Gao Z T.Non-contact high temperature thermal deformation measurement system based on digital image correlation method[J].Acta Aeronautica et Astronautica Sinica,2010,31(10):1960-1967.
[2] 叶雨寒,袁艺宁,刘庆涛,等.汽车车身铝合金连接构件的拉伸试验分析[J].锻压技术,2020,45(4):189-194.Ye Y H,Yuan Y N,Liu Q T,et al.Tensile test analysis of aluminum alloy connection part in automobile body[J].Forging & Stamping Technology,2020,45(4):189-194.
[3] 孙涛,梁晋,蔡勇,等.用数字散斑法测量铜/铝复层板拉伸变形[J].光学精密工程,2012,20(12):2599-2606.Sun T,Liang J,Cai Y,et al.Measurement of tensile deformation of copper/aluminum laminates by digital speckle method[J].Optics and Precision Engineering,2012,20(12):2599-2606.
[4] Chu T C,Ranson W F,Sutton M A,et al.Applications of digital-image-correlation techniques to experimental mechanics[J].Experimental Mechanics,1985,25(3):232-245.
[5] Schreier H W,Sutton M A.Systematic errors in digital image correlation due to under matched subset shape functions[J].Experimental Mechanics,2002,42(3):303-310.
[6] Avtaev V V,Yakovlev N O.Digital image correlation method study of the static fracture toughness and the fracture strength of a thin-sheet aluminum alloy[J].Russian Metallurgy,2020,(10):1207-1212.
[7] Ustinov A M,Klopotov A A,Potekaev A I,et al.Study of the elasto-plastic deformation of the steel/steel adhesive joint using digital image correlation method[J].Solid State Phenomena,2020,6115:143-160.
[8] Lin L X,Xu M J,Xu J J,et al.Measurement and evaluation of strain fields in T23 steel based on digital image correlation method[J].J.Cent.South Univ.,2017,24:1977-1985.
[9] 梁晋,胡浩,唐正宗,等.数字图像相关法测量板料成形应变[J].机械工程学报,2013,49(10):77-83.Liang J,Hu H,Tang Z Z,et al.Measurement of sheet metal forming strain by digital image correlation method[J].Journal of Mechanical Engineering,2013,49(10):77-83.
[10] 李耿,殷咸青,牛靖,等.采用光学测量技术研究铝合金焊接变形[J].精密成形工程,2020,12(1):92-97.Li G,Yin X Q,Niu J,et al.The welding deformation of aluminum alloy was studied by optical measurement technology[J].Journal of Netshape Forming Engineering,2020,12(1):92-97.
[11] 唐正宗,梁晋,肖振中,等.用于三维变形测量的数字图像相关系统[J].光学精密工程,2010,18(10):2244-2253.Tang Z Z,Liang J,Xiao Z Z,et al.Digital image correlation system for 3D deformation measurement[J].Optics and Precision Engineering,2010,18(10):2244-2253.
[12] GB/T 228.1-2010,金属材料拉伸试验第1部分:室温试验方法[S].GB/T 228.1-2010,Metallic materials-Tensile testing-Part 1:Method of test at room temperature[S].
[13] Pan B,Xie H M.Full-strain field measurement based on least-square fitting of local displacement for digital image correlation method[J].Acta Optica Sinica,2007,27(11) 1980-1986.
[14] Stamborska M,Lapin J,Bajana O.Effect of hydrogenation on deformation behaviour of ferritic-pearlitic steel studied by digital image correlation method[J].Kovove Mater,2016,54:397-406.
[15] 林莉,支旭东,范锋,等.Q235B钢Johnson-Cook模型参数的确定[J].振动与冲击,2014,33(9):153-158.Ling L,Zhi X D,Fan F,et al.Determination of parameters of Johnson-Cook models of Q235B steel[J].Journal of Vibration and Shock,2014,33(9):153-158.

基金

国家自然科学基金面上项目(51975324);2020年度河南省高校科技创新团队(20IRTSTHN015);江苏省盐城市“515”创新领军人才项目(盐委[2020]40号);河南省科技攻关项目(202102210087);郑州市科技局产学研项目(郑科函[2020]3号)
PDF(2589 KB)

337

Accesses

0

Citation

Detail

段落导航
相关文章

/