Actuator plays a significant role in soft robotics. This paper proposed an ultralong stretchable soft actuator (US2A) with a variable and sizeable maximum elongation. The US2A is composed of a silicone rubber tube and a bellows woven sleeve. The maximal extension can be conveniently regulated by just adjusting the wrinkles' initial angle of the bellows woven sleeve. The kinematics of US2A could be obtained by geometrically analyzing the structure of the bellows woven sleeve when the silicone rubber tube is inflated. Based on the principle of virtual work, the actuating models have been established: the pressure-elongation model and the pressure-force model. These models reflect the influence of the silicone tube's shell thickness and material properties on the pneumatic muscle's performance, which facilitates the optimal design of US2A for various working conditions. The experimental results showed that the maximum elongation of the US2A prototype is 257%, and the effective elongation could be variably regulated in the range of 0 and 257%. The proposed models were also verified by pressure-elongation and pressure-force experiments, with an average error of 5% and 2.5%, respectively. Finally, based on the US2A, we designed a pneumatic rehabilitation glove, soft arm robot, and rigid-soft coupling continuous robot, which further verified the feasibility of US2A as a soft driving component.
Wenbiao Wang
,
Yunfei Zhu
,
Shibo Cai
,
Guanjun Bao
. Ultralong Stretchable Soft Actuator (US2A): Design, Modeling and Application[J]. Chinese Journal of Mechanical Engineering, 2023
, 36(1)
: 13
-13
.
DOI: 10.1186/s10033-023-00835-3
[1] G Bao, H Fang, L Chen, et al. Soft robotics: Academic insights and perspectives through bibliometric analysis. Soft Robotics, 2018, 5(3): 229–241.
[2] X Wang, R Guo, J Liu. Liquid metal based soft robotics: Materials, designs, and applications. Advanced Materials Technologies, 2019, 4(2): 1800549.
[3] M Cianchetti, M Follador, B Mazzolai, et al. Design and development of a soft robotic octopus arm exploiting embodied intelligence. 2012 IEEE International Conference on Robotics and Automation, IEEE. 2012: 5271–5276.
[4] B Tondu, S Ippolito, J Guiochet, et al. A seven-degrees-of-freedom robot-arm driven by pneumatic artificial muscles for humanoid robots. The International Journal of Robotics Research, 2005, 24(4): 257–274.
[5] C Laschi, B Mazzolai, V Mattoli, et al. Design of a biomimetic robotic octopus arm. Bioinspiration & Biomimetics, 2009, 4(1): 015006.
[6] T E Pillsbury, N M Wereley, Q Guan. Comparison of contractile and extensile pneumatic artificial muscles. Smart Materials and Structures, 2017, 26(9): 095034.
[7] F Daerden D Lefeber. The concept and design of pleated pneumatic artificial muscles. International Journal of Fluid Power, 2001, 2(3): 41–50.
[8] C P Chou, B Hannaford. Measurement and modeling of mckibben pneumatic artificial muscles. IEEE Transactions on Robotics and Automation, 1996, 12(1): 90–102.
[9] H. D. Yang, B. T. Greczek, A. T. Asbeck. Modeling and analysis of a high-displacement pneumatic artificial muscle with integrated sensing. Frontiers in Robotics and AI, 2019, 5, 136.
[10] K Han, N H Kim, D Shin. A novel soft pneumatic artificial muscle with high-contraction ratio. Soft Robotics, 2018, 5(5): 554–566.
[11] T Abrar, F Putzu, J Konstantinova, et al. Epam: Eversive pneumatic artificial muscle. 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE, 2019: 19–24.
[12] T Yukisawa, S Nishikawa, R Niiyama, et al. Ceiling continuum arm with extensible pneumatic actuators for desktop workspace. 2018 IEEE International Conference on Soft Robotics (RoboSoft). IEEE, 2018: 196–201.
[13] E W Hawkes, D L Christensen, A M Okamura. Design and implementation of a 300% strain soft artificial muscle. 2016 IEEE International Conference on Robotics and Automation (ICRA), IEEE. 2016: 022–4029.
[14] T Noritsugu, H Yamamoto, D Sasakil, et al. Wearable power assist device for hand grasping using pneumatic artificial rubber muscle. SICE 2004 Annual Conference, IEEE. 2004(1): 420–425.
[15] T Yukisawa, Y Ishii, S Nishikawa, et al. Modeling of extensible pneumatic actuator with bellows (epab) for continuum arm. 2017 IEEE International Conference on Robotics and Biomimetics (ROBIO), IEEE. 2017: 2303–2308.
[16] N Thompson, X Zhang, F Ayala, et al. Augmented joint stiffness and actuation using architectures of soft pneumatic actuators. 2018 IEEE International Conference on Robotics and Automation (ICRA), IEEE. 2018: 1533–1538.
[17] G Belforte, G Eula, A Ivanov, et al. Presentation of textile pneumatic muscle prototypes applied in an upper limb active suit experimental model. The Journal of the Textile Institute, 2018, 109(6): 757–766.
[18] H Al-Fahaam, S Nefti-Meziani, T Theodoridis, et al. The design and mathematical model of a novel variable stiffness extensor-contractor pneumatic artificial muscle. Soft Robotics, 2018, 5(5): 576–591.
[19] A Al-Ibadi, S Nefti-Meziani, S Davis. Design, implementation and modelling of the single and multiple extensor pneumatic muscle actuators. Systems Science & Control Engineering, 2018, 6(1): 80–89.
[20] H Al-Fahaam, S Davis, S Nefti-Meziani. The design and mathematical modelling of novel extensor bending pneumatic artificial muscles (ebpams) for soft exoskeletons. Robotics and Autonomous Systems, 2018, 99: 63–74.
[21] D Rus, M T Tolley. Design, fabrication and control of soft robots. Nature, 2015, 521(7553): 467–475.
[22] B Tondu, P Lopez. Modeling and control of mckibben artificial muscle robot actuators. IEEE Control Systems Magazine, 2000, 20(2): 15–38.
[23] E G Hocking N M Wereley. Analysis of nonlinear elastic behavior in miniature pneumatic artificial muscles. Smart Materials and Structures, 2012, 22(1): 014016.
[24] D Trivedi, A Lotfi, C D Rahn. Geometrically exact models for soft robotic manipulators. IEEE Transactions on Robotics, 2008, 24(4): 773–780.
[25] S H Sadati, S E Naghibi, A Shiva, et al. A geometry deformation model for braided continuum manipulators. Frontiers in Robotics and AI, 2017, 4: 22.
[26] M Doumit, J Leclair. Development and testing of stiffness model for pneumatic artificial muscle. International Journal of Mechanical Sciences, 2017, 120: 30–41.
[27] M. D Grissom, V Chitrakaran, D Dienno, et al. Design and experimental testing of the octarm soft robot manipulator. Unmanned Systems Technology VIII, 2006, 6230: 491–500.
[28] I A Gravagne, I D Walker, C D Rahn. Large deflection dynamics and control for planar continuum robots. 18th Biennial Conference on Mechanical Vibration and Noise Pt. B Clemson University Dept, 2001: 29634.
[29] W McMahan, B A Jones, I D Walker. Design and implementation of a multi-section continuum robot: Air-octor. 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems. IEEE, 2005: 2578–2585.
