[1] T Huang, Z X Li, M Li, et al. Conceptual design and dimensional synthesis of a novel 2-DOF translational parallel robot for pick-and-place operations. Journal of Mechanical Design, 2004, 126 (3):449-455.
[2] Q Zhao, P F Wang, J P Mei. Controller parameter tuning of delta robot based on servo identification. Chinese Journal of Mechanical Engineering, 2015, 28(2):267-275.
[3] S T Liu, T Huang, J P Mei, et al. Optimal design of a 4-DOF SCARA type parallel robot using dynamic performance indices and angular constraints. Journal of Mechanisms and Robotics-Transactions of the ASME, 2012, 4 (3):031005.
[4] W W Shang, S Cong, Y Ge. Coordination motion control in the task space for parallel manipulators with actuation redundancy. IEEE Transactions on Automation Science and Engineering, 2013, 10(3):665-673.
[5] Q Zhang, C D Li, J T Zhang, et al. Active vibration control and coupled vibration analysis of a parallel manipulator with multiple flexible links. Shock and Vibration, 2016, 2:1-19.
[6] E Avci, M Kenmochi, M Kawanishi, et al. Vibration control of 3P(s)4 class parallel mechanisms for high speed applications using quantitative feedback design. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, Chicago, USA, September 14-18, 2014:1710-1715.
[7] G M Clayton, S Tien, K K Leang, et al. A review of feedforward control approaches in nanopositioning for high-speed SPM. Journal of Dynamic Systems, Measurement, and Control, 2009, 131(6):636-650.
[8] T Zhao, B Zi, S Qian. Algebraic method-based point-to-point trajectory planning of an under-constrained cable-suspended parallel robot with variable angle and height cable mast. Chinese Journal of Mechanical Engineering, 2020, 33(1):54.
[9] K Kozak, I Ebert-Uphoff, W Singhose. Locally linearized dynamic analysis of parallel manipulators and application of input shaping to reduce vibrations. Journal of Mechanical Design-Transactions of the ASME, 2004, 126:156-168.
[10] W Singhose. Command shaping for flexible system:A review of the first 50 years. International Journal of Precision Engineering and Manufacturing, 2009, 10(4):153-168.
[11] W Chatlatanagulchai, D Kijdech, T Benjalersyarnon, et al. Quantitative feedback input shaping for flexible-joint robot manipulator. Journal of Dynamic Systems, Measurement, and Control. 2016, 138(6):061006.
[12] N C Singer, W P Seering. Preshaping command inputs to reduce system vibration. Journal of Dynamic System, Measurement and Control, 1990, 112(1):76-82.
[13] J Park, P H Chang, H S Park, et al. Design of learning input shaping technique for residual vibration suppression in an industrial robot. IEEE/ASME Transactions on Mechatronics, 2006, 11(1):55-65.
[14] J Kim, E A Croft. Preshaping input trajectories of industrial robots for vibration suppression. Robotics and Computer Integrated Manufacturing, 2018, 54:35-44.
[15] Y Altintas, M R Khoshdarregi. Contour error control of CNC machine tools with vibration avoidance. CIRP Annals-Manufacturing Technology, 2012, 61(1):335-338.
[16] M T Ha, C G Kang. Experimental analysis of natural frequency error to residual vibration in ZV, ZVD, and ZVDD shapers. Proceedings of International Conference on Ubiquitous Robots and Ambient Intelligence, Jeju, South Korea, 30 October-2 November, 2013:195-199.
[17] T Chan, K Godbole, E Hou. Optimal input shaper design for high-speed robotic workcells. Journal of Vibration and Control, 2003, 9(9):1359-1376.
[18] M O T Cole, T Wongratanaphisan. Optimal FIR input shaper designs for motion control with zero residual vibration. Journal of Dynamic Systems, Measurement, and Control, 2011, 133:021008.
[19] Z Masoud, K Alhazza. Frequency-modulation input shaping for multimode systems. Journal of Vibration and Control, 2016, 22(15):3439-3451.
[20] D K Thomsen, R Søe-Knudsen, O Balling, et al. Vibration control of industrial robot arms by multi-mode time-varying input shaping. Mechanism and Machine Theory, 2021, 155:104072.
[21] W Singhose, E Crain, W Seering. Convolved and simultaneous two-mode input shaper. IEE Control Theory and Applications, 1997, 144(6):515-520.
[22] B Li, X Zhang, J K Mills, et al. Vibration suppression of a 3-PRR flexible parallel manipulator using input shaping. Proceeding IEEE International Conference on Mechatronics and Automation, Changchun, China, August 9-12, 2009:3539-3544.
[23] J Wu, T M Li, X Q Tang. Residual vibration control of planar parallel mechanism. Journal of Mechanical Engineering, 2006, 42(11):49-53. (in Chinese)
[24] S Rhim, W J Book. Adaptive time-delay command shaping filter for flexible manipulator control. IEEE/ASME Transaction on Mechatronics, 2004, 9(4):619-626.
[25] T Zhang, K Y Lin, A M Zhang. Research on flexible dynamics of a 6-DOF industrial robot and residual vibration control with a pre-adaptive input shaper. Journal of Mechanical Science and Technology, 2019, 33(4):1875-1889.
[26] Y H Li, Y Ma, S T Liu, et al. Integrated design of a 4-DOF high-speed pick-and-place parallel robot. CIRP Annals- Manufacturing Technology, 2014, 63 (1):185-188.
[27] H Deng, J D Sun, S D Huang, et al. Vibration suppression of the flexible manipulator using optimal input shaper and linear quadratic regulator. The 12th International Conference on Ubiquitous Robots and Ambient Intelligence, Goyang city, Korea, October 28-30, 2015:255-260.
[28] R M Khoshdarregi, S Tappe, Y Altintas. Integrated five-axis trajectory shaping and contour error compensation for high-speed CNC machine tools. IEEE/ASME Transactions on Mechatronics, 2014, 19(6):1859-1871.
[29] Y Ma, W T Niu, Z J Luo, et al. Static and dynamic performance evaluation of a 3-DOF spindle head using CAD-CAE integration methodology. Robotics and Computer-Integrated Manufacturing, 2016, 41:1-12.
[30] Y H Li, T Huang, D G Chetwynd. An approach for smooth trajectory planning of high-speed pick-and-place parallel robots using quintic B-splines. Mechanism and Machine Theory, 2018, 126:479-490.
