Advanced Transportation Equipment

Analysis of the Load-Stress Response Characteristics of the Bogie Frame in Intercity Electric Multiple Unit

  • Hua Zou ,
  • Shou-Guang Sun ,
  • Qiang Li ,
  • Zun-Song Ren
Expand
  • Engineering Research Center of Structure Reliability and Operation Measurement Technology of Rail Guided Vehicles of Ministry of Education, Beijing Jiaotong University, Beijing 100044, China

Received date: 2016-02-08

  Online published: 2019-07-23

Supported by

Supported by National Natural Science Foundation of China (Grant No. U1134201), National Key Research and Development Program of China (Grant No. 2016YFB1200404-08), and National Key Research and Development Program of China (Grant No. 2016YFB1200505-11)

Abstract

Load spectra research for bogie frame requires establishing the load-stress relationship on working condition, which has been omitted by the researchers. With the load-stress of the bogie frame of an intercity Electric Multiple Unit (Hereinafter referred to as EMU) as the research object, an optimization model of the load-stress transfer relationship is established. The load-stress coefficient for EMU bogie frame was calibrated in the laboratory bench and online test was arranged on Dazhou-Chengdu line. Comparison of nonlinear and linear neural networks proves that the linear transitive relation between the load and stress of the bogie frame in the operating process is highly suitable. An optimization model of the load-stress transfer coefficient is obtained. The data calculated with the modified coefficient are closer to the dynamic stress results in the actual operating process than the data calculated with the calibration coefficient. The coefficient of the modified transitive relation is unaffected by operating area, empty load, heavy load, or other conditions in the operating process of the intercity EMU. The real loads in actual situations are obtained. The model of online load-stress relationship that is highly suitable for line stress calculation is finally established. The research is helpful for further damage calculation and inferring the time history signal of the load in load spectra research.

Cite this article

Hua Zou , Shou-Guang Sun , Qiang Li , Zun-Song Ren . Analysis of the Load-Stress Response Characteristics of the Bogie Frame in Intercity Electric Multiple Unit[J]. Chinese Journal of Mechanical Engineering, 2018 , 31(2) : 26 -26 . DOI: 10.1186/s10033-018-0226-5

References

[1] S G Zhang. Study on testing and establishment method for the load spectrum of bogie frame for high-speed trains. Science China Series E:Technological Sciences, 2008, 51:2142-2151.
[2] Y J Wei. Research on the mechanics of high speed rails. Acta Mechanica Sinica, 2016, 32(2):1-2.
[3] N Zhu, S G Sun, Q Li, et al. Theoretical research and experimental validation of load spectra on bogie frame structures of high-speed trains. Acta Mechanica Sinica, 2014, 30(6):901-909.
[4] W Wang, Y Wang, S Sun, et al. Long-term load spectrum test of high-speed train bogie. Journal of Southwest Jiaotong University, 2015, 50(1):84-89. (in Chinese)
[5] N Zhu, S G Sun, Q Li, et al. Theoretical research and experimental validation of elastic dynamic load spectra on bogie frame of high-speed train. Chinese Journal of Mechanical Engineering, 2016, 29(3):498-506.
[6] Z S Ren, S G Sun, Q Li, et al. Experimental studies of load characteristics of bogie frames for 350 km/h EMUs. Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail & Rapid Transit, 2012, 226(2):216-227.
[7] C J Mi, Z Q Gu, W G Wu, et al. Fatigue life analysis of rear axle housing of mining dump truck under random load. Journal of Mechanical Engineering, 2012, 48(12):103-109. (in Chinese)
[8] W H Ma, S H Luo, R R Song. Load spectrum research of tumbler journal box node of high-speed motor car. Railway Locomotive & Car, 2009, 29(4):12-14. (in Chinese)
[9] P Wolfsteiner, W Breuer. Fatigue assessment of vibrating rail vehicle bogie components under non-Gaussian random excitations using power spectral densities. Journal of Sound & Vibration, 2013, 332(332):5867-5882.
[10] H Y Ye. The dynamic stress test of random load loading on high speed bogie frame. Chengdu:Southwest Jiaotong University, 2011. (in Chinese)
[11] D F Zhang. The load spectrum study on high speed bogie frame. Chengdu:Southwest Jiaotong University, 2013. (in Chinese)
[12] Z S Ren, S G Sun, Q Li. Axle spring load test and dynamic characteristics analysis of high speed EMU. Journal of Mechanical Engineering, 2010, 46(10):109-115. (in Chinese)
[13] D G Liu, L G Shao. Consideration on the effect of the elasticity of car-body and frame on the dynamic load, dynamic stress and fatigue damage. Rolling Stock, 2005, 45:1-4. (in Chinese)
[14] Z S Ren, S G Sun, Q Li, et al. Simulation of railway bogie dynamic stress and elastic vibration. Journal of Mechanical Engineering, 2004, 40(8):187-192. (in Chinese)
[15] W J Wang, S G Sun, Q Li. Dynamic stress simulation of flexible bogie frame. Journal of the China Railway Society, 2006, 28(1):44-49. (in Chinese)
[16] C W Liang. Dynamic analysis of the geometrical nonlinear model derived from bogie. Harbin:Harbin Institute of Technology, 2012.
[17] A H Wickens. Static and dynamic instabilities of bogie railway vehicles with linkage steered wheelsets. Vehicle System Dynamics, 1996, 26(1):1-16.
[18] R V Dukkipati, S Narayanaawamy, M O M Osman. Comparative performance of unconventional railway trucks. International Journal of Vehicle Design, 1998, 19(3):326-339.
[19] Z S Ren. Multi-point contact of the high-speed vehicle-turnout system dynamics. Chinese Journal of Mechanical Engineering, 2013, 26(3):518-525.
[20] K G Liu, C L Yan, S M Zhang. Bench calibration of load spectrum measurement for fighter airplane main undercarriage. Journal of Jilin University (Engineering and Technology Edition), 2006, 36:1025-1028. (in Chinese)
[21] W M Zhai, P Liu, J Lin, et al. Experimental investigation on vibration behaviour of a CRH train at speed of 350 km/h. International Journal of Rail Transportation, 2015, 3(1):1-16.
[22] X C Jin, S G Sun, G X Chen. Study on vertical dynamic response of railway track induced by express trains. China Safety Science Journal, 2005, 15:38-42. (in Chinese)
[23] L Chi, J Liu, C Jiang. Radial basis shape function method for identification of dynamic load in time domain. China Mechanical Engineering, 2013, 24(3):285-289. (in Chinese)
[24] X Han, J Liu, W J Li, et al. A computational inverse technique for reconstruction of multisource loads in time domain. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(4):595-602. (in Chinese)
[25] M Chen. The MATLAB neural network theory and examples. Beijing:Tsinghua University Press, 2013. (in Chinese)
[26] J F Qiao, H G Han. Analysis and design of feedforward neural networks. Beijing:Science Publishing House, 2013. (in Chinese)
[27] H Yang, Q S Liu. Mathematical statistics. Beijing:Higher Education Press, 2004. (in Chinese)
Outlines

/