When the automobile exhaust thermoelectric generator system was connected to the exhaust pipe of the engine, the airflow would be changed. In order to minimize the impacts on the original performance of the engines and improve the electrical power generation performance of the automobile exhaust thermoelectric generator systems, a hexagonal heat exchanger used for an automobile exhaust thermoelectric generator system was optimized for the on-board compatibility with the goal of the highest average surface temperature and the smallest pressure loss. A finite element simulation model of the heat exchanger was built based on CFD software to study the influences of the inlet gas speed of the heat exchanger on the surface temperature and pressure loss, as well as the influences of the inlet gas temperature on the surface temperature. The fins length, fins angle, fins width and fins spacing were taken as the design variables. The Gaussian process regression proxy model was established based on the test data, and the grey wolf algorithm was used to obtain the optimal solution in the multi-objective optimization function space. The results show that compared with the classical NSGA-Ⅱ algorithm, the Pareto solution set obtained by multi-objective grey wolf algorithm is more concentrated and the evaluation index is higher. The optimized heat exchanger with multi-objective grey wolf algorithm has a lower surface average temperature than that of several structures before optimization, but the pressure loss is significantly reduced. Compared with the cavity structure heat exchanger, the surface average temperature and pressure loss of optimized heat exchanger increase, and the pressure loss increasing amplitudes are within the acceptable ranges. The optimized heat exchanger may effectively take into account the power generation of the automobile exhaust thermoelectric generator systems and the on-board compatibility.
QUAN Rui , LI Tao , YUE Yousheng , CHANG Yufang , TAN Baohua
. Research on Multi-objective Optimization of Vehicle Compatibility of Automobile Exhaust Thermoelectric Generator Systems[J]. China Mechanical Engineering, 2022
, 33(16)
: 2000
-2007,2015
.
DOI: 10.3969/j.issn.1004-132X.2022.16.014
[1]YANG J H, FRANCIS R S. Automotive Applications of Thermoelectric Materials[J]. Journal of Electronic Materials, 2009, 38(7):1245-1251.
[2]WU H, CHEN B, CHENG H. The P-N Conduction Type Transition in Ge-incorporated Bi2Te3 Thermoelectric Materials[J]. Acta Materialia, 2017, 122(1):120-129.
[3]全睿, 谭保华, 唐新峰, 等. 汽车尾气温差发电装置中热电器件的试验研究[J]. 中国机械工程,2014, 25(5):705-709.
QUAN Rui, TAN Baohua, TANG Xinfeng, et al. Experimental Study on Thermoelectric Modules Used in Automobile Exhaust Thermoelectric Generator[J]. China Mechanical Engineering, 2014, 25(5):705-709.
[4]JERZY M, FUC P, LIJEWSKI P, et al. Analysis of an Increase in the Efficiency of a Spark Ignition Engine through the Application of an Automotive Thermoelectric Generator[J]. Journal of Electronic Materials, 2016, 45(8):4028-4037.
[5]PABLO F Y, ARMAS O, CAPETILLO A, et al. Thermal Analysis of a Thermoelectric Generator for Light-duty Diesel Engines[J]. Applied Energy, 2018, 226:690-702.
[6]WANG Y P, WU C, TANG Z B, et al. Optimization of Fin Distribution to Improve the Temperature Uniformity of a Heat Exchanger in a Thermoelectric Generator[J]. Journal of Electronic Materials, 2015, 44(6):1724-1732.
[7]HE W, WANG S X,LI Y Z, et al. Structural Size Optimization on an Exhaust Exchanger Based on the Fluid Heat Transfer and Flow Resistance Characteristics Applied to an Automotive Thermoelectric Generator[J]. Energy Conversion & Management, 2016,10(32):240-249.
[8]何嘉华,周宏甫,刘二辉,等.基于神经网络和遗传算法的温差发电器优化设计[J].机械设计,2018,35(9):31-36.
HE Jiahua, ZHOU Hongfu, LIU Erhui, et al. Optimization Design of Thermoelectric Generator Based on Neural Network and Genetic Algorithm[J]. Mechanical Design, 2018, 35(9):31-36.
[9]舒歌群,刘祎,田华,等.柴油机余热回收筒式温差发电器的结构优化[J].天津大学学报(自然科学与工程技术版),2016,49(11):1181-1186.
SHU Gequn, LIU Wei, TIAN Hua, et al. Structural Optimization of Cylindrical Thermoelectric Generating System for Diesel Exhaust Waste Heat Recovery[J]. Journal of Tianjin University (Natural Science and Engineering Technology Edition), 2016, 49 (11):1181-1186.
[10]刘越,石秀勇,倪计民,等.发动机尾气余热温差发电系统的优化[J].内燃机工程,2017,38(2):8-14.
LIU Yue, SHI Xiuyong, NI Jimin, et al. Optimization of Thermoelectric Generation System with Engine Exhaust Gas[J]. Chinese Internal Combustion Engine Engineering, 2017, 38 (2):8-14.
[11]房伟,全书海,方洪,等.基于二分梯度法的汽车尾气发电最大功率跟踪算法[J].中国机械工程,2016,27(19):2693-2697.
FANG Wei, QUAN Shuhai, FANG Hong, et al. MPPT Algorithm of AETEG Based on Dichotomy and Gradient Method[J]. China Mechanical Engineering, 2016, 27 (19):2693-2697.
[12]QUAN R, LI T, YUE Y S, et al. Experimental Study on a Thermoelectric Generator for Industrial Waste Heat Recovery Based on a Hexagonal Heat Exchanger[J]. Energies, 2020, 13(12):3137.
[13]MIRJALILI S, SAREMI S, MIRJALILI S M, et al. Multi-objective Grey Wolf Optimizer:a Novel Algorithm for Multi-criterion Optimization[J]. Expert Systems with Applications, 2015, 47:106-119.
[14]邢怀玺,吴华,陈游,等.基于多目标灰狼算法的干扰资源多效能优化方法[J].北京航空航天大学学报,2020,46(10):1990-1998.
XING Huaiyu, WU Hua, CHEN You, et al. Multi-efficacy Optimization Method of Interference Resources Based on Multi-target Grey Wolf Algorithm[J]. Journal of Beijing University of Aeronautics and Astronautics, 2020, 46 (10):1990-1998.
[15]赵云涛,谌竟成,李维刚.融合自适应差分进化机制的多目标灰狼优化算法[J].计算机科学,2019,46(S2):83-88.
ZHAO Yuntao, CHEN Jingchen, LI Weigang. Multi-objective Grey Wolf Optimization Hybrid Adaptive Differential Evolution Mechanism[J]. Computer Science, 2019, 46(S2):83-88.
[16]冉渊.汽车尾气温差发电系统车载应用能效研究[D]. 武汉:武汉理工大学,2019.
RAN Yuan. Research on Automotive Exhaust-based Thermoelectric Generator Energy Efficiency for Vehicular Application[D]. Wuhan:Wuhan University of Technology, 2019.
[17]QUAN R, WANG C, WU F, et al. Parameter Matching and Optimization of an ISG Mild Hybrid Powertrain Based on an Automobile Exhaust Thermoelectric Generator[J]. Journal of Electronic Materials, 2019, 49(5):2734-2746.