Three-level Orderly Proceeding Optimization Design and Its Applications for Parallel Mechanisms Based on Kinematics,Stiffness and Dynamics

Expand
  • 1.Research Center for Advanced Mechanism Theory,Changzhou University,Changzhou,Jiangsu,213164
    2.School of Mechanical Engineering,Dalian University of Technology,Dalian,Liaoning,116024

Received date: 2021-04-19

  Online published: 2022-08-04

Abstract

A three-level orderly proceeding optimization methodology was proposed based on kinematics, stiffness and dynamics of PM. The three intelligent algorithms of genetic algorithm(GA), particle swarm algorithm(PSO) and differential evolution(DE) were applied to optimize the dimensional parameters, sectional parameters and mass parameters respectively. Firstly, optimization of the dimensional parameters was aiming at the workspace performance and motion/force transmission performance. Secondly, on the basis of the dimension parameter optimization, the sectional parameters of the components with the objective of the bearing stiffness and overall stiffness of the mechanisms were optimized. Finally, on the basis of the dimensional parameters and sectional parameter optimizations, the mass parameters of the mechanisms were optimized with the objective of dynamics dexterity and energy transmission efficiency. A zero-coupling SCARA PM was used as an example to illustrate the optimization procedure. Firstly, the kinematics model of the PM was established by using vector method, and the dimensional parameters were optimized through the workspace performance and motion/force transmission performance. Secondly, the stiffness model of the PM was obtained by using the virtual spring method, and the flexibility matrix was obtained through the parameter identification of CAD model. Then, the dynamics model of the PM was derived by using the general dynamics equation, and the mass parameters of the components were optimized through the dynamics dexterity and energy transmission efficiency. Thus, the comprehensive performances of kinematics, stiffness and dynamics of the PM reached. Meanwhile, some design criteria of dimensional, sectional and mass parameters were obtained. 

Cite this article

WANG Yixi, SHEN Huiping, CHEN Pu, WU Guanglei . Three-level Orderly Proceeding Optimization Design and Its Applications for Parallel Mechanisms Based on Kinematics,Stiffness and Dynamics[J]. China Mechanical Engineering, 2022 , 33(13) : 1560 -1575,1621 . DOI: 10.3969/j.issn.1004-132X.2022.13.007

References

[1]WU Guanglei. Multi-objective Optimum Design of a 3-RRR Spherical Parallel Manipulator with Kinematic and Dynamic Dexterities[J]. Modeling, Identification and Control, 2012, 33(3):111-121. 
[2]HAY A M, SNYMAN J A. Methodologies for the Optimal Design of Parallel Manipulators[J]. International Journal for Numerical Methods in Engineering, 2004, 59(1):131-152. 
[3]JEAN-PIERRE M. Parallel Robots[M]. Dordrech:Kluwer Academic Publishers, 2002. 
[4]沈惠平, 朱小蓉, 尹洪波, 等. 并联机构的结构降耦原理及其设计方法[J]. 机械工程学报, 2016, 52(23):102-113. 
SHEN Huiping, ZHU Xiaorong, YIN Hongbo, et al. Principle and Design Method for Structure Coupling-reducing of Parallel Mechanisms[J]. Journal of Mechanical Engineering, 2016, 52(23):102-113. 
[5]沈惠平, 李菊, 王振, 等. 基于结构降耦与运动解耦的的并联机构拓扑结构优化及其性能改善研究[J]. 机械工程学报, 2017, 53(19):176-186. 
SHEN Huiping, LI Ju, WANG Zhen, et al. Topology Structure Optimization and Performance Improvement for Parallel Mechanisms Based on Structure Coupling-reducing and Motion Decoupling[J]. Journal of Mechanical Engineering, 2017, 53(19):176-186. 
[6]ZHANG Xianmin, ZHU Benliang. Topology Optimization of Compliant Mechanisms[M]. Singapore:Springer, 2018. 
[7]朱大昌, 冯文结, 安梓铭. 整体式平面三自由度全柔顺并联机构构型拓扑优化设计[J]. 机械工程学报, 2015, 51(5):30-36. 
ZHU Dachang, FENG Wenjie, AN Ziming. Topology Structure Optimization and Performance Improvement for Parallel Mechanisms Based on Structure Coupling-reducing and Motion Decoupling[J]. Journal of Mechanical Engineering, 2015, 51(5):30-36. 
[8]GOSSELIN C M, ANGELES J. The Optimum Kinematic Design of a Planar Three-degree-of-freedom Parallel Manipulator[J]. Journal of Mechanisms Transmissions & Automation in Design, 1988, 110(1):35-41. 
[9]CARREYERO J A, NAHON M A, PDOHORODESKI R P. Workspace Analysis and Optimization of a Novel 3-DOF Parallel Manipulator[J]. International Journal of Robotics & Automation, 2000, 15(4):178-188. 
[10]RAZA U. Multiobjective Design Optimization of 3-PRR Planar Parallel Manipulators[M]. Berlin:Springer, 2010. 
[11]刘辛军, 谢福贵, 汪满军. 并联机器人机构学基础[M]. 北京:高等教育出版社, 2018:118. 
LIU Xinjun, XIE Fugui, WANG Manjun. Fundamentals of Parallel Robotic Mechanism[M]. Beijing:Higher Education Press, 2018:118. 
[12]车林仙. 球面四杆机构函数综合的带修复策略可行性规则差分进化算法[J]. 机械工程学报, 2015, 51(11):37-46. 
CHE Linxian. Feasibility-rule-based Differential Evolution Algorithm with Repair Strategies for Function Synthesis of Spherical Four-bar Linkages[J]. Journal of Mechanical Engineering, 2015, 51(11):37-46. 
[13]池腾腾. 并联机构2-RPU/SPR动平台的多目标优化与稳健性研究[D]. 邯郸:河北工程大学, 2017. 
CHI Tengteng. Multi Objective Optimization and Robustness of 2-RPU/SPR Platform[D]. Handan:Hebei University of Engineering, 2017. 
[14]吴超宇. 新型Tripod并联机器人性能分析及尺寸优化[D]. 重庆:重庆大学, 2017. 
WU Chaoyu. Performance Analysis and Size Optimization of a Novel Tripod Parallel Robot[D]. Chongqing:Chongqing University, 2017. 
[15]刘平松. I4R型并联机器人全域性能及其优化研究[D]. 南京:南京理工大学, 2013. 
LIU Pingsong. Global Performance and Optimization of I4R Parallel Robot[D]. Nanjing:Nanjing University of Science and Technology, 2013. 
[16]ALTUZARRA O, HERNANDEZ A, SALGADO O, et al. Multiobjective Optimum Design of a Symmetric Parallel Schnflies-motion Generator[J]. Journal of Mechanical Design, 2009, 131(3):031002. 
[17]TAGHVAEIPOUR A, ANGELESJ, LESSARD L. Optimum Structural Design of a Two-limb Schnflies Motion Generator[J]. Mechanism & Machine Theory, 2014, 80:125-141. 
[18]WU Guanglei,  BAI Shaoping. Architecture Optimization of a Parallel Schnflies-motion Robot for Pick-and-place Applications in a Predefined Workspace[J]. Mechanism and Machine Theory, 2016, 106:148-165. 
[19]CHE Linxian. Dimensional Synthesis for a Rec4 Parallel Mechanism with Maximum Transmission Workspace[J]. Mechanism and Machine Theory, 2020, 153:104008. 
[20]沈惠平, 许可, 杨廷力. 一种零耦合度且运动解耦的新型3T1R并联操作手2-(Pa3R)3R的设计及其运动学[J]. 机械工程学报, 2019, 55(5):53-64. 
SHEN Huiping, XU Ke, YANG Tingli. New 3T1R Parallel Manipulator 2-(RPa3R)3R with Zero Coupling Degree and Partial Decoupling:Design and Kinematics[J]. Journal of Mechanical Engineering, 2019, 55(5):53-64. 
[21]GREGORIO R D, ZANFORLIN R. Workspace Analytic Determination of Two Similar Translational Parallel Manipulators[J]. Robotica, 2003, 21(5):555-566. 
[22]JO D Y, HAUG E J. Workspace Analysis of Closed-loop Mechanisms with Unilateral Constraints[C]∥ASME Design Automation Conference. Montreal, 1989:53-60. 
[23]王一熙. 一种新型SCARA并联机构的运动学、刚度及动力学分析[D]. 常州:常州大学, 2019. 
WANG Yixi. Kinematic, Stiffness and Dynamic Analysis of a Novel SCARA Parallel Mechanism[D]. Changzhou:Changzhou University, 2019. 
[24]XIE Fugui, LIU Xinjun. Design and Development of a High-speed and High-rotation Robot with Four Identical Arms and a Single Platform[J]. Journal of Mechanisms & Robotics, 2015, 7(4):041015. 
[25]车林仙. 面向机构分析与设计的差分进化算法研究[D]. 北京:中国矿业大学, 2012. 
CHE Linxian. Research on Differential Evolution Algorithm for Mechanism Analysis and Design[D]. Beijing:China University of Mining and Technology, 2012. 
[26]ACHARYY S K, MANDAL M. Performance of EAs for Four-bar Linkage Synthesis[J]. Mechanism & Machine Theory, 2009, 44(9):1784-1794. 
[27]STOCK M, MILLER K. Optimal Kinematic Design of Spatial Parallel Manipulators:Application to Linear Delta Robot[J]. Journal of Mechanical Design, 2003, 125(2):292-301. 
[28]PASHKEVICH A, CHABLAT D, WENGER P. Stiffness Analysis of Overconstrained Parallel Manipulators[J]. Mechanism and Machine Theory, 2010, 44:966-982. 
[29]WU Guanglei, BAI Shaopin, KEPLER J. Mobile Platform Center Shift in Spherical Parallel Manipulators with Flexible Limbs[J]. Mechanism and Machine Theory, 2014, 75:12-26. 
[30]WU Guanglei. On the Stiffness of Three/Four Degree-of-freedom Parallel Pick-and-place Robots with Four Identical Limbs[C]∥IEEE International Conference on Robotics and Automation. Stockholm, 2016:16055479. 
[31]KLIMCHIK A, PASHKEVICH A, CHABLAT D. CAD-based Approach for Identification of Elasto-static Parameters of Robotic Manipulators[J]. Finite Elements in Analysis and Design, 2013, 75:19-30. 
[32]YAN S J, ONG S K, NEE A Y C. Stiffness Analysis of Parallelogram-type Parallel Manipulators Using a Strain Energy Method[J]. Robotics and Computer-Integrated Manufacturing, 2016, 37:13-22. 
[33]刘鸿文. 材料力学Ⅰ[M]. 5版. 北京:高等教育出版社, 2011. 
LIU Hongwen. Mechanics of Materials Ⅰ[M]. 5th ed. Beijing:Higher Education Press, 2011. 
[34]王庭树. 机器人运动学及动力学[M]. 西安:西安电子科学技术大学出版社, 1990. 
WANG Tingshu. Robot Kinematics and Dynamics[M]. Xian:Xidian Universiity Press, 1990. 
[35]DASGUPTA B, MRUTHYUNJAYA T S. A Newton-Euler Formulation for the Inverse Dynamics of the Stewart Platform Manipulator[J]. Mechanism & Machine Theory, 1998, 33(8):1135-1152. 
[36]ZHANG D, BI Z, LI B. Design and Kinetostatic Analysis of a New Parallel Manipulator[J]. Robotics and Computer-integrated Manufacturing, 2009, 25(4/5):782-791. 
[37]TSAI L. Solving the Inverse Dynamics of a Stewart-Gough Manipulator by the Principle of Virtual Work[J]. Journal of Mechanical Design, 2000, 122(1):3-9. 
[38]李玉航, 梅江平, 刘松涛. 一种新型4自由度高速并联机械手动力尺度综合[J]. 机械工程学报, 2014, 50(19):32-40. 
LI Yuhang, MEI Jiangping, LIU Songtao. Dynamic Dimensional Synthesis of a 4-DOF High-speed Parallel Manipulator[J]. Journal of Mechanical Engineering, 2014, 50(19):32-40. 
[39]CHENG H. Dynamics and Control of Redundantly Actuated Parallel Manipulators[J]. IEEE-ASME Transactions on Mechatronics, 2003, 8(4):483-491. 
[40]LEBRT G, LIU K, LEWIS F. Dynamic Analysis and Control of a Stewart Platform Manipulator[J]. Journal of Field Robotics, 2010, 10(5):629-655. 
[41]YUN Y, LI Y. Design and Analysis of a Novel 6-DOF Redundant Actuated Parallel Robot with Compliant Hinges for High Precision Positioning[J]. Nonlinear Dynamics, 2010, 61(4):829-845. 
[42]窦玉超, 姚建涛, 高思慧. 冗余驱动并联机器人动力学建模与驱动力协调分配[J]. 农业机械学报, 2014, 45(1):293-300. 
DOU Yuchao, YAO Jiantao, GAO Sihui. Dynamic Modeling and Driving Force Coordinate Distribution of the Parallel Robot with Redundant Actuation[J]. Transactions of the Chinese Society for Agricultural, 2014(1):293-300. 
[43]梅凤祥. 分析力学[M]. 北京:北京理工大学出版社, 2013. 
MEI Fengxiang. Analytical Mechanics[M]. Beijing:Beijing Institute of Technology Press, 2013. 
[44]张彬彬. 一种并联机构的动力学性能评价及控制研究[D]. 成都:电子科技大学, 2016. 
ZHANG Binbin. Dynamic Performance Evaluation and Control of a Parallel Mechanism[D]. Chengdu:University of Electronic Science and Technology of China, 2016. 
[45]沈惠平. 机器人机构拓扑特征运动学[M]. 北京:高等教育出版社, 2021.
SHEN Huiping. Topological Characteristics-based kinematics for Robotic Mechanisms[M]. Beijing:Higher Education Press, 2021.
Outlines

/

〈 〉