Response Behavior of Wheel-rail Interface Adhesion and Damage after Wheels Encountering Warm and Humid Airflow during Trains through Tunnels in Frigid Regions

Expand
  • 1.State Key Laboratory of Performance Monitoring and Guarantee of Rail Transport Infrastructure,East China Jiaotong University,Nanchang,330013
    2.The State Key Laboratory of Heavy Duty AC Drive Electric Locomotive Systems Integration,Zhuzhou,Hunan,412001
    3.Tongda Industry and Trade Co.,Ltd.,Nanchang Railway Administration,Nanchang,330002

Received date: 2022-04-08

  Online published: 2022-07-22

Abstract

The response behavior of warm and humid airflows with different humidity(10% to 99%) on the adhesion of high-speed wheel-rail interfaces and wheel surface damages were studied by using a wheel-rail rolling testing machine under the environmental condition of -40 ℃. The results show that the adhesion coefficient will drop rapidly when the wheel-rail interfaces encounter warm and humid airflows in a low temperature environment, and with the increase of air humidity, the decrease amplitudes and the recovery time of the adhesion coefficient increase. Compared with wheel materials that are not exposed to warm and wet, the adhesion coefficient, wear amount, and plastic deformation layer thickness all increase significantly. With the increase of airflow humidity, the average adhesion coefficient decreases, and the wear amount and the thickness of the plastic deformation layer increase. Under the condition of low temperature and no moisture, the main form of wheel material wear is fatigue wear, and the section cracks are mainly surface cracks. Under the action of low-temperature intermittent warm and humid air currents, the main forms of wheel material wear are oxidative wear and adhesive wear. The third body layers formed by the accumulation of wear debris appear, and the section cracks appear multi-layer cracks and subsurface cracks. The warm and humid airflow has a significant effect on the adhesion of the trains wheel-rail interfaces and wheel damages in the low temperature environment. It is mainly reflected in the instantaneous drop in the adhesion coefficient and the more serious wear and fatigue damages of the wheel materials. Therefore, in order to ensure safer and more stable operation when trains pass through hot and humid tunnels in high-cold areas, special attention should be paid to the impact of warm and humid airflow on train wheels and rails.

Cite this article

SHEN Mingxue, LI Shengxin, YU Meng, HUANGFU Lizhi, RONG Bin, XIONG Guangyao . Response Behavior of Wheel-rail Interface Adhesion and Damage after Wheels Encountering Warm and Humid Airflow during Trains through Tunnels in Frigid Regions[J]. China Mechanical Engineering, 2022 , 33(12) : 1504 -1511 . DOI: 10.3969/j.issn.1004-132X.2022.12.012

References

[1]沈明学, 秦涛, 李圣鑫, 等. 宽温域下高速轮轨界面黏着与车轮表面损伤行为[J]. 交通运输工程学报, 2021, 21(3):269-278.
Shen Mingxue, QIN Tao, LI Shengxin, et al. High-speed Wheel-rail Interfacial Adhesion and Surface Damage Behavior of Wheel in Wide Temperature Range [J]. Journal of Traffic and Transportation Engineering, 2021, 21(3):269-278.
[2]常可可, 王立平, 薛群基. 极端工况下机械表面界面损伤与防护研究进展[J]. 中国机械工程, 2020, 31(2):206-220.
CHANG Keke, WANG Liping, XUE Qunji. Progresses of Damage and Protection for Surfaces and Interfaces in Machinery under Extreme Operating Conditions[J]. China Mechanical Engineering, 2020, 31(2):206-220.
[3]彭建兵, 崔鹏, 庄建琦. 川藏铁路对工程地质提出的挑战[J]. 岩石力学与工程学报, 2020, 39(12):2377.
PENG Jianbing, CUI Peng, ZHUANG Jianqi. Challenges to Engineering Geology of Sichuan-Tibet Railway[J]. Chinese Journal of Rock Mechanics and Engineering, 2020, 39(12):2377.
[4]漆继红,许模,蒋良文,等.川藏铁路雅林段水文地质结构控制的水热循环及隧道热害特征[J/OL].地球科学, 2021:1-14. https:∥kns.cnki.net/kcms/detail/42.1874.P.20211118.2131.034.html.
QI Jihong, XU Mo, JIANG Liangwen, et al. Characteristics of Geothermal Cycle and Tunnel Geothermal Disaster Controlled by Hydrogeological Structure in Yaan to Linzhi Section of Sichuan-Tibet Railway[J/OL]. Earth Science,2021:1-14. https:∥kns.cnki.net/kcms/detail/42.1874.P.20211118.2131.034.html.
[5]ZHU H, LI H, AL-JUBOORI A, et al. Understanding and Treatment of Squat Defects in a Railway Network [J]. Wear, 2020, 442/443:203139.
[6]AL-JUBOORI A, ZHU H, WEXLER K, et al. Evolution of Rail Surface Degradation in the Tunnel:the Role of Water on Squat Growth under Service Conditions[J]. Engineering Fracture Mechanics, 2019, 209:32-47.
[7]ZHU Y, SODERBERG A, OLOFSSON U . Adhesion Modeling in the Wheel-rail Contact under Dry and Lubricated Conditions Using Measured 3D Surfaces [J] . Tribology International, 2013,61:1-10.
[8]ZHU Y, OLOFSSON U, CHEN H. Friction between Wheel and Rail:a Pin-on-Disc Study of Environmental Conditions and Iron Oxides[J]. Tribology Letters, 2013,52:327-339.
[9]HAYASHI O, NOMURA T. Influence of Atmospheric Conditions Upon Adhesion between Rails and Running Wheels[J]. Transactions of the Japan Society of Mechanical Engineers, 1997, 63(606):566-571.
[10]LIEW W Y H.Effect of Relative Humidity on the Unlubricated Wear of Metals[J]. Wear,2006,260(7/8):720-727.
[11]SHI L B, MA L, GUO J, et al. Influence of Low Temperature Environment on the Adhesion Characteristics of Wheel-rail Contact[J]. Tribology International, 2018, 127:59-68.
[12]LIU X, MEEHAN P A. Investigation of the Effect of Relative Humidity on Lateral Force in Rolling Contact and Curve Squeal[J]. Wear, 2014, 310(1/2):12-19.
[13]OLOFSSON U, SUNDVALL K. Influence of Leaf, Humidity and Applied Lubrication on Friction in the Wheel-rail Contact:Pin-on-disc Experiments[J]. Proceedings of the Institution of Mechanical Engineers, Part F:Journal of Rail and Rapid Transit, 2004, 218(3):235-342.
[14]LEWIS S R, LEWIS R, OLOFSSON U, et al. Effect of Humidity, Temperature and Railhead Contamination on the Performance of Friction Modifiers:Pin-on-disk Study[J]. Proceedings of the Institution of Mechanical Engineers Part F, Journal of Rail and Rapid Transit, 2013, 227(2):115-127.
[15]GALAS R, OMASTA M , SHI L B , et al. The Low Adhesion Problem:the Effect of Environmental Conditions on Adhesion in Rolling-sliding Contact[J]. Tribology International, 2020, 151:106521.
[16]CAO X, HUANG W L, HE C G, et al. The Effect of Alumina Particle on Improving Adhesion and Wear Damage of Wheel/Rail under Wet Conditions[J]. Wear, 2016, 348/349:98-115.
[17]CHU F, WU X, MA Q. Condensed Droplet Growth on Surfaces with Various Wettability[J]. Applied Thermal Engineering, 2017, 115:1101-1108.
[18]WU X, DAI W, XU W, et al. Mesoscale Investigation of Frost Formation on a Cold Surface[J]. Experimental Thermal & Fluid Science, 2007, 31(8):1043-1048.
[19]PETIT J, BONACCURSO E. General Frost Growth Mechanism on Solid Substrates with Different Stiffness[J]. Langmuir, 2014, 30(4):1160-1168.
[20]LYU Y, ZHU Y, OLOFSSON U. Wear between Wheel and Rail:a Pin-on-disc Study of Environmental Conditions and Iron Oxides[J]. Wear, 2015, 328/329:277-285.
[21]ZHOU L, HU Y, DING H H, et al. Experimental Study on the Wear and Damage of Wheel-rail Steels under Alternating Temperature Conditions[J]. Wear, 2021, 5:203829.
[22]马蕾, 王文健, 郭俊, 等. 低温下高速车轮材料滚动磨损与疲劳损伤行为[J]. 机械工程学报, 2017, 53(20):126-133.
MA Lei, WANG Wenjian, GUO Jun, et al. Rolling Wear and Fatigue Damage Behavior of High-speed Wheel Materials at Low Temperature[J]. Journal of Mechanical Engineering,2017,20(53):126-133.
[23]RONG K J, XIAO Y L,SHEN M X,et al. Influence of Ambient Humidity on the Adhesion and Damage Behavior of Wheel-rail Interface under Hot Weather Condition[J]. Wear, 2021, 486/487:204091.
[24]WU Q, QIN T, SHEN M  K, et al. Effect of Gas Nitriding on Interface Adhesion and Surface Damage of CL60 Railway Wheels under Rolling Contact Conditions[J]. Metals, 2020,10(7):911.
[25]ZHU Yi. The Influence of Iron Oxides on Wheel-rail Contact:a Literature Review[J]. Proceedings of the Institution of Mechanical Engineers Part F, Journal of Rail & Rapid Transit, 2017, 232(3):734-743.
[26]马蕾, 何成刚, 赵相吉,等. 低温环境下轮轨材料滚动磨损模拟试验研究[J]. 摩擦学学报, 2016, 36(1):92-97.
MA Lei, HE Chenggang, ZHAO Xiangji, et al. Simulation Experiment for Rolling Wear of Wheel/Rail Materials under Low Temperature Environment[J]. Tribology, 2016, 36(1):92-97.
[27]ZHOU L, WANG W J, HU Y, et al. Study on the Wear and Damage Behaviors of Hypereutectoid Rail Steel in Low Temperature Environment[J]. Wear, 2020, 456/457:203365.
[28]DORGHAM A, AZAM A, PARSAEIAN P, et al. Understanding the Effect of Water on the Transient Decomposition of Zinc Dialkyldithiophosphate (ZDDP)[J]. Tribology International, 2021, 157:106855.
[29]MOMOSE Y, TSURUYA K, SAKURAI T, et al. Photoelectron Emission and XPS Studies of Real Iron Surfaces Subjected to Scratching in Air, Water, and Organic Liquids[J]. Surface and Interface Analysis, 2016, 48(4):202-211.
[30]MIEDEMA P S, BORGATTI F, OFFI F, et al. Iron is X-ray Photoemission of Fe2O3[J]. Journal of Electron Spectroscopy and Related Phenomena, 2015, 203:8-13.
[31]REICHELT M, CAPPELLA B. Influence of Relative Humidity on Wear of Self-mated 100Cr6 Steel[J]. Wear, 2020, 450/451:203239.
[32]LIEW W Y H. Effect of Relative Humidity on the Unlubricated Wear of Metals[J]. Wear, 2006, 260(7/8):720-727.
Outlines

/

〈 〉