Effects of Phase States on Clean Cutting Performance and Surface Integrity of NiTi Alloys

Expand
  • School of Mechanical Engineering,Beijing Institute of Technology,Beijing,100081

Received date: 2021-08-30

  Online published: 2022-03-24

Abstract

Aiming at the high-efficiency and high-speed clean machining of NiTi alloys, through clean cutting technologies such as dry cutting, carbon dioxide and liquid nitrogen cryogenic cutting, the cutting experiments of NiTi alloys in different phases were designed and the cutting performance and surface integrity indicators were compared and analyzed, and the influence rules of material phases and cutting parameters on the cutting processes of NiTi alloys were studied. The results show that the cutting force of the martensitic phase is the largest and that of the austenitic phase is the smallest, the former may reach 1.04~3.84 times of the latter; there are four elements Ni, Ti, O and C in the chips, mainly TiO2 and NiCO3 form, the formation of the two compounds changes with the cutting temperature, which in turn causes the chip color to change with the processing parameters; when the feed rate is small, the surface roughness Ra value of the austenitic phase is the largest, and the Ra value of the martensitic phase is the smallest, the former may reach 1.24~1.66 times of the latter; under martensitic phase cutting conditions, when the cutting speed is as 130 m/min, the feed rate is as 0.05 mm/r, and the cutting depth is as 0.2 mm, Ra value reaches the minimum value of 0.73 μm. 

Cite this article

YU Jianhang, YAN Pei, FAN Lei, GU Huiqing, JIAO LiQ, IU Tianyang, WANG Xibin . Effects of Phase States on Clean Cutting Performance and Surface Integrity of NiTi Alloys[J]. China Mechanical Engineering, 2022 , 33(05) : 569 -576 . DOI: 10.3969/j.issn.1004-132X.2022.05.005

References

[1]赵连城, 郑玉峰. 形状记忆与超弹性镍钛合金的发展和应用[J]. 中国有色金属学报, 2004, 14(专辑1):323-326.
ZHAO Liancheng, ZHENG Yufeng. Development and Applications of Nickel-Titanium Alloys with Shape Memory Effect and Superelasticity[J]. The Chinese Journal of Nonferrous Metals, 2004, 14(S1):323-326.
[2]IANAGUI A, TANNURI E A. A Sliding Mode Torque and Position Controller for an Antagonistic SMA Actuator[J]. Mechatronics, 2015, 30:126-139.
[3]TAI N T, AHN K K. A RBF Neural Network Sliding Mode Controller for SMA Actuator[J]. International Journal of Control, Automation and Systems, 2010, 8(6):1296-1305.
[4]NICOLAU-KUKLINSKA A, LATKO-DURALEK P, NAKONIECZNA P, et al. A New Electroactive Polymer Based on Carbon Nanotubes and Carbon Grease as Compliant Electrodes for Electroactive Actuators[J]. Journal of Intelligent Material Systems and Structures, 2018, 29(7):1520-1530.
[5]SHAW J A, KYRIAKIDES S. Thermomechanical Aspects of NiTi[J]. Journal of the Mechanics and Physics of Solids, 1995, 43(8):1243-1281.
[6]SANDOVAL L, HASKINS J B, LAWSON J W. Stability, Structure, and Suppression of the Martensitic Transition Temperature by B19′ Compound Twins in NiTi:Ab Initio and Classical Simulations[J]. Acta Materialia, 2018, 154:182-189.
[7]李洁, 周勇, 张俊. 多孔NiTi合金制备的研究现状[J]. 热处理技术与装备, 2013, 34(1):36-40.
LI Jie, ZHOU Yong, ZHANG Jun. Research Status on Preparation of Porous NiTi Alloy[J]. Heat Treatment Technology and Equipment, 2013, 34(1):36-40.
[8]WEINERT K, PETZOLDT V. Machining of NiTi Based Shape Memory Alloys[J]. Materials Science and Engineering:A, 2004, 378(1/2):180-184.
[9]MEHRPOUYA M, SHAHEDIN A M, DAWOOD S D S, et al. An Investigation on the Optimum Machinability of NiTi Based Shape Memory Alloy[J]. Materials and Manufacturing Processes, 2017, 32(13):1497-1504.
[10] KAYNAK Y, KARACA H E, NOEBE R D, et al. Analysis of Tool-wear and Cutting Force Components in Dry, Preheated, and Cryogenic Machining of NiTi Shape Memory Alloys[J]. Procedia CIRP, 2013, 8:498-503.
[11]KAYNAK Y, MANCHIRAJU S, JAWAHIR I S, et al. Chip Formation and Phase Transformation in Orthogonal Machining of NiTi Shape Memory Alloy:Microstructure-based Modelling and Experimental Validation[J]. CIRP Annals:Manufacturing Technology, 2020, 69(1):85-88.
[12]KAYNAK Y, HUANG B, KACARA H E, et al. Surface Characteristics of Machined NiTi Shape Memory Alloy:the Effects of Cryogenic Cooling and Preheating Conditions[J]. Journal of Materials Engineering and Performance, 2017, 26(7):3597-3606.
[13]KAYNAK Y, KACARA H E, JAWAHIR I S. Surface Integrity Characteristics of NiTi Shape Memory Alloys Resulting from Dry and Cryogenic Machining[J]. Procedia CIRP, 2014, 13(1):393-398.
[14]KAYNAK Y, KACARA H E, NOEBE R D, et al. The Effect of Active Phase of the Work Material on Machining Performance of a NiTi Shape Memory Alloy[J]. Metallurgical and Materials Transactions A, 2015, 46(6):2625-2636.
[15]KAYNAK Y. Machining and Phase Transformation Response of Room-temperature Austenitic NiTi Shape Memory Alloy[J]. Journal of Materials Engineering and Performance, 2014, 23(9):3354-3360.
[16]ZHAO Y, LI J, GUO K, et al. Study on Chip Formation Characteristics in Turning NiTi Shape Memory Alloys[J]. Journal of Manufacturing Processes, 2020, 58:787-795.
Outlines

/

〈 〉