This paper aimed at the SPT open water self-lubricating structure of the support/thrust integrated water-lubricated bearings with hub layout type. According to the high-speed and high-pressure flow generated by the blades, the water-lubricated bearing lubrication and cooling flow channels were designed thus forming an integrated self-circulating lubrication scheme of support/thrust bearings. Due to the coupling effectiveness of blade hydrodynamics and bearing clearance flow, an iterative design method of bearing clearance flow was proposed. Then a hydrodynamics coupling calculation model for the clearance between the blade and the bearing was established, and the quantitative calculation and analysis of the bearing clearance flow of the SPT was realized. In addition, the open water test of the SPT and bench test of the integrated water-lubricated bearing were completed. In the entire test interval, the maximum error between the calculated values and test results of the thrust coefficient and the bearing clearance flow rate are as 6.2% and 4.6% respectively, which verifiy the effectiveness and accuracy of the design method and calculation model. The proposed methods have important engineering significance for the design and optimization of the SPT.
HE Shengyang, ZHOU Feng
. Hydrodynamics Design and Tests of Clearance Flow in Bearings of Shaftless Pump-jet Thrusters[J]. China Mechanical Engineering, 2022
, 33(04)
: 406
-412
.
DOI: 10.3969/j.issn.1004-132X.2022.04.004
[1]马伟明. 舰船动力发展的方向:综合电力系统[J]. 海军工程大学学报, 2002, 14(6):1-5.
MA Weiming. Integrated Power Systems:Trend of Ship Power Development[J]. Journal of Naval University of Engineering, 2002, 14(6):1-5.
[2]马伟明. 电力集成技术[J]. 电工技术学报, 2005, 20(1):16-20.
MA Weiming. Power System Integration Technique[J]. Transactions of China Electrotechnical Society, 2005, 20(1):16-20.
[3]王东, 靳栓宝, 魏应三, 等. 集成电机推进装置应用综述[J]. 中国电机工程学报, 2020, 40(11):3654-3663.
WANG Dong, JIN Shuanbao, WEI Yingsan, et al. Review on the Integrated Electric Propulsion System Configuration and Its Applications[J]. Proceedings of the CSEE, 2020, 40(11):3654-3663.
[4]王东, 刘正林, 靳栓宝, 等. 用于有毂轮缘推进器的集成式水润滑轴承:CN105129060A[P]. 2015-12-09.
WANG Dong, LIU Zhenglin, JIN Shuanbao, et al. Integrated Water Lubricated Bearings for Rim Propellers with Hub:CN105129060A[P]. 2015-12-09.
[5]闫志敏, 周新聪, 袁成清, 等. 美国舰艇水润滑尾轴承材料研究进展[J]. 船舶工程, 2015, 37(3):1-5.
YAN Zhimin, ZHOU Xincong, YUAN Chengqing, et al. Development and Study of Ship Stern Bearing Materials of American Naval Vessels[J]. Ship Engineering, 2015, 37(3):1-5.
[6]周广武. 水润滑橡胶合金轴承混合润滑分析与动力学性能优化[D]. 重庆:重庆大学, 2013.
ZHOU Guangwu. Mixed Lubrication Analysis and Dynamic Performance Optimization of Water Lubricated Rubber Alloy Bearings[D]. Chongqing:Chongqing University, 2013.
[7]王家序, 田凡, 王帮长, 等. 橡胶合金材料及利用该材料制造传动件的方法:CN101323681A[P]. 2008-12-17.
WANG Jiaxu, TIAN Fan, WANG Bangchang, et al. Rubber Alloy Material and a Method for Manufacturing Transmission Parts Using this Material:CN101323681A[P]. 2008-12-17.
[8]欧阳武, 刘正林, 严新平, 等. 可变阶梯阻尼推力轴承:CN105114446B[P]. 2018-06-26.
Ouyang Wu, LIU Zhenglin, YAN Xinping, et al. Variable Step Damping Thrust Bearings:CN 105114446B[P]. 2018-06-26.
[9]LIANG Xingxin, YAN Xinping, Ouyang Wu, et al. Experimental Research on Tribological and Vibration Performance of Water-lubricated Hydrodynamic Thrust Bearings Used in Marine Shaft-less Rim Driven Thrusters[J]. Wear, 2019, 426:778-791.
[10]HENRY Y, BOUYER J, FILLON M. Experimental Analysis of the Hydrodynamic Effect during Start-up of Fixed Geometry Thrust Bearings[J]. Tribology International, 2018, 120:299-308.
[11]GENG Tao, MENG Qingfeng, WANG Nan, et al. Experimental Investigation of Film Pressure Distribution in Water-lubricated Rubber Journal Bearings[J]. Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2013, 228(4):397-406.
[12]胡鹏飞, 靳栓宝, 沈洋, 等. 轮缘驱动无轴推进器冷却方案设计与多物理场耦合计算[J]. 船电技术, 2016, 36(3):28-31.
HU Pengfei, JIN Shuanbao, SHEN Yang, et al. Design and Multifield Coupled Analysis of Cooling System for PM Motor in Rim Driven Propulsor[J]. Marine Electric & Electronic Engineering, 2016, 36(3):28-31.
[13]ZHU Hao, JIN Shuanbao, WANG Dong, et al. Design and Analysis of the Integrated Motor Cooling System for Shaftless Propeller[J]. IEEE Access, 2019, 7:174573-174582.
[14]邓小明, 高丽敏, 高磊, 等. 对转压气机叶排交界面参数传递的数值研究[J]. 航空动力学报, 2015, 30(6):1460-1469.
DENG Xiaoming, GAO Limin, GAO Lei, et al. Numerical Investigation of Parameters Transmission on Blade Rows Interface of Contra-rotating Compressor[J]. Journal of Aerospace Power, 2015, 30(6):1460-1469.
[15]SAS IP, Inc. ANSYS CFX-Solver Modeling Guide(Version 17. 2)[M]. Canonsburg:ANSYS, Inc., 2016:179-181.