Multi-objective Optimization of Commercial Vehicle Power Cabins Based on Flow Field Modulation

Expand
  • 1.School of Mechanical Engineering,Guilin University of Electronic Technology,Guilin,Guangxi,541004
    2.R&D Center of Commercial Vehicle,Dong Feng Liuzhou Automobile Co.,Ltd.,Liuzhou,Guangxi,545005

Received date: 2021-03-29

  Online published: 2022-01-25

Abstract

Aiming at the problems of dust, heat dissipation, and poor driving thermal comfort in the power cabins of commercial vehicles, a power cabin flow field modulate optimization method was proposed based on CFD numerical simulation and superposition optimization. The simulation analyses of the flow field in the power cabins of the original commercial vehicles revealed that reducing the airflow resistance and increasing the air intake may improve the performance of the power cabins. The performance modulation optimization of the flow field of the power cabins were realized by the superimpose optimization design of the radiator, cooling fan, and air guide hood. The results show that after optimization, the intake air volume is increased by 70.9%, the cooling K-value is reduced to 49.5 ℃, the intake air temperature increment and the number of dust particles are reduced by 19.8 ℃ and 94.0% respectively compared with the original commercial vehicles. The performance of the power cabins is significantly improved. The optimized commercial vehicle test results are in good agreement with the simulation ones. 

Cite this article

TANG Rongjiang, ZUO Yingxiang, LI Shenfang, LU Zengjun, XU Enyong, BI Daokun . Multi-objective Optimization of Commercial Vehicle Power Cabins Based on Flow Field Modulation[J]. China Mechanical Engineering, 2022 , 33(02) : 234 -242 . DOI: 10.3969/j.issn.1004-132X.2022.02.014

References

[1]郭健忠, 罗仁宏, 王之丰, 等. 商用车发动机舱热管理一维/三维联合仿真与试验[J]. 中国机械工程, 2016, 27(4):526-530. 
GUO Jianzhong, LUO Renhong, WANG Zhifeng, et al. Test and 1D/3D Co-simulation of Thermal Management for a Commercial Vehicle Engine Compartment[J]. China Mechanical Engineering, 2016, 27(4):526-530. 
[2]FRANZKE R, SVENSSON R, THIRINGER T, et al. Measurements and CFD Modeling of Temperatures in the Engine Compartment of a Hybrid Electric Vehicle[C]∥2017 IEEE Vehicle Power and Propulsion Conference(VPPC). Belfort, 2017:1-5. 
[3]唐荣江, 张成, 陆增俊, 等. 重型载货汽车底部尘土污染仿真与抑制[J]. 汽车技术, 2017(11):59-62. 
TANG Rongjiang, ZHANG Cheng, LU Zengjun, et al. Simulation and Inhibition on Truck Bottom of Dust Pollution[J]. Automobile Technology, 2017(11):59-62.
[4]谷正气, 王振, 张勇, 等. 某轿车车身尘土污染数值仿真与控制[J]. 长安大学学报(自然科学版), 2015, 35(5):145-152. 
GU Zhengqi, WANG Zhen, ZHANG Yong, et al, Carbody Dust Pollution and Controlling Based on Numerical Simulation[J]. Journal of Changan University(Natural Science Edition), 2015, 35(5):145-152. 
[5]王梓宇, 彭宇明, 吴有彬, 等. 发动机舱温度场耦合仿真方法研究[J]. 机械工程与技术, 2020, 9(2):131-142. 
WANG Ziyu, PENG Yuming, WU Youbin, et al. Research on the Coupling Simulation Method of Engine Room Temperature Field[J]. Mechanical Engineering and Technology, 2020, 9(2):131-142. 
[6]刘水长, 李礼夫, 张勇, 等. 基于双场耦合的发动机舱内流场散热分析与结构改进[J]. 汽车工程, 2017, 39(8):879-888. 
LIU Shuichang, LI Lifu, ZHANG Yong, et al. Flow Field Heat Dissipation Analysis and Structural Modification of Engine Compartment Based on Velocity-temperature Field Coupling[J]. Automotive Engineering, 2017, 39(8):879-888. 
[7]王宏朝, 单希壮, 杨志刚. 基于矩阵风扇的车辆前端换热优化[J]. 西安交通大学学报, 2018, 52(1):69-76. 
WANG Hongchao, SHAN Xizhuang, YANG Zhigang. Heat Dissipation Optimization of Vehicle Front End Based on Matrix Fan[J]. Journal of Xian Jiaotong University, 2018, 52(1):69-76. 
[8]王东, 陈嘉羲. 汽车下护板对发动机舱散热性能的影响[J]. 计算机辅助工程, 2018, 27(3):21-25. 
WABG Dong, CHEN Jiaxi, Influence of Bottom Panel on Engine Cabin Heat Dissipation Performance[J]. Computer Aided Engineering, 2018, 27(3):21-25. 
[9]张岳, 熊锐, 吴坚, 等. 基于场协同原理的车用散热器内流场优化[J]. 汽车技术, 2019(9):35-41. 
ZHANG Yue, XIONG Rui, WU Jian, et al. Flow Field Optimization of Vehicle Radiator Based on Field Synergy Principle[J]. Automobile Technology, 2019(9):35-41. 
[10]EULALIE Y, GILOTTE P, MORTAZAVI I. Numerical Study of Flow Control Strategies for a Simplified Square Back Ground Vehicle[J]. Fluid Dynamics Research, 2017, 49(3):035502. 
[11]KUTHADA T, WITTMEIER F, BOCK B, et al. The Effects of Cooling Air on the Flow Field around a Vehicle[J]. SAE International Journal of Passenger Cars—Mechanical Systems, 2016-01-1603. 
[12]ZHANG C, UDDIN M, ROBINSON A C, et al. Full Vehicle CFD Investigations on the Influence of Front-end Configuration on Radiator Performance and Cooling Drag[J]. Applied Thermal Engineering, 2018, 130:1328-1340. 
[13]黄海波, 余旭东, 刘清国, 等. 汽车车轮周围气流场的数值模拟研究[J]. 系统仿真学报, 2019, 31(4):641-647. 
HUANG Haibo, YU Xudong, LIU Qingguo, et al. Numerical Simulation for Airflow Field around Car Wheels[J]. Journal of System Simulation, 2019, 31(4):641-647. 
[14]朱晴, 陈群, 张艳芳, 等. 某 SUV 车型发动机舱 CFD 仿真计算与优化[J]. 汽车技术, 2016(1):1-5. 
ZHU Qing, CHEN Qun, ZHANG Yanfang, et al. Underhood CFD Simulation and Optimization of a SUV[J]. Automobile Technology, 2016(1):1-5. 
[15]唐荣江, 张淼, 胡宾飞, 等. 商用车车身底部尘土污染分析及优化[J]. 科学技术与工程, 2020, 20(14):5622-5628. 
TANG Rongjiang, ZHANG Miao, HU Binfei, et al. Analysis and Optimization of Dust Pollution at the Bottom of Commercial Vehicle Body[J]. Science Technology and Engineering, 2020, 20(14):5622-5628
[16]梁永莉, 田瑛泽, 刘童, 等. 基于颗粒物化学组分粒径分布特征的源解析方法构建与评估[J]. 环境科学, 2020, 41(1):90-97. 
LIANG Yongli, TIAN Yingze, LIU Tong, et al. Construction and Evaluation on Size Resolved Source Apportionment Methods Based on Particle Size Distribution of Chemical Species[J]. Environmental Science, 2020, 41(1):90-97. 
[17]丁鹏宇. 重型卡车冷却风扇参数对机舱流场特性的影响研究[D]. 长春:吉林大学, 2013. 
DING Pengyu. Research on Influence of Coling Fan Parameters on Underhood Flow-field Characteristics for Heavy-duty Truck[D]. Changchun:Jilin University, 2013. 
[18]WURM J, FITL M, GUMPESBERGER M, et al. Numerical and Experimental Investigation of Thermal Conditions Inside the Engine Compartment of Snowmobiles[J]. SAE International Journal of Commercial Vehicles, 2015-01-9017. 
[19]SUN Q, CHOI K S, ZHAO Y, et al. Resistance of Velocity Slip Flow in Pipe/Channel with a Wudden Contraction[J]. Physics of Fluids, 2020, 32(6):063602. 
Outlines

/

〈 〉