A joining and forming integrated process for high-strength steel/CFRP multi-material parts was developed, where the hot stamping technology was used to join the high-strength steel and CFRP prepreg. The preparation processes of multi-material composite parts under different quenching temperatures during hot stamping were studied and microscopic observation of the steel sheets was conducted. Then the three-point bending tests for the multi-material composite parts were carried out. The microscopic observation results show that the microstructure of the steel sheets is full martensite. The three-point bending tests indicate that the bending angles of the samples with no CFRP, with two layers CFRP, and with four layers CFRP are as 130°, 110° and 104°, respectively. Besides, the force-displacement curves of the bending tests were integrated to calculate the energy absorption of the samples. The results show that the energy absorption of the samples with no CFRP, with two layers CFRP, and with four layers CFRP are as 9410 J, 9692 J, and 10050 J. The energy absorption of the samples with two-layer CFRP and the samples with four-layer CFRP increase by 2.9% and 6.8% compared with the samples without CFRP.
ZHU Bin, LIU Wang, TIAN Feng, LIU Yong, ZHANG Yisheng,
. Research on Hot Stamping-Joining Integrated Process Feasibility of High-strength Steel/CFRP and Sample Bending Performance[J]. China Mechanical Engineering, 2021
, 32(24)
: 2975
-2980
.
DOI: 10.3969/j.issn.1004-132X.2021.24.010
[1]顾纪超, 许东阳, 李光耀,等. 基于多组混合元模型方法的汽车轻量化设计[J]. 中国机械工程, 2016, 27(14):1982-1987.
GU Jichao, XU Dongyang, LI Guangyao, et al. Lightweight Design of Vehicle Based on Multiple Hybrid Meta-model Method[J]. China Mechanical Engineering, 2016, 27(14):1982-1987.
[2]王义林, 刘勇, 耿会程,等. 高强铝合金热冲压成形技术研究进展[J]. 航空制造技术, 2019, 62(16):22-35.
WANG Yilin, LIU Yong, GENG Huicheng, et al. Research Progresses of Hot Stamping Technology for High Strength Aluminum Alloy Sheet [J]. Aeronautical Manufacturing Technology, 2019, 62(16):22-35.
[3]刘勇,耿会程,朱彬,等.高强铝合金高效热冲压工艺研究进展[J].锻压技术,2020,45(7):1-12.
LIU Yong, GENG Huicheng, ZHU Bin, et al. Research Progress on High Efficiency Hot Stamping Process for High Strength Aluminum Alloy [J]. Forging & Stamping Technology, 2020, 45(7):1-12.
[4]马鸣图, 毕祥玉, 游江海,等. 铝合金汽车板性能及其应用的研究进展[J]. 机械工程材料, 2010,34(6):1-5.
MA Mingtu, BI Xiangyu, YOU Jianghai, et al. Research Progress of Property and Its Application of Aluminum Alloy Auto Sheet[J]. Materials for Mechanical Engineering, 2010, 34(6):1-5.
[5]DHALIWAL G S, NEWAZ G M. Experimental and Numerical Investigation of Flexural Behavior of Hat Sectioned Aluminum/Carbon Fiber Reinforced Mixed Material Composite Beam[J]. Composites Part B Engineering, 2019, 182:107642.
[6]宋燕利, 杨龙, 郭巍,等. 面向汽车轻量化应用的碳纤维复合材料关键技术[J]. 材料导报, 2016, 30(17):16-25.
SONG Yanli, YANG Long, GUO Wei, et al. A Survey on Key Technologies for Carbon Fiber-reinforced Plastics with Applications to Automobile Lightening[J]. Materials Review, 2016, 30(17):16-25.
[7]DONG W, LIU H C, PARK S J, et al. Fracture Toughness Improvement of Epoxy Resins with Short Carbon Fibers[J]. Journal of Industrial and Engineering Chemistry, 2014, 20(4):1220-1222.
[8]FERNANDO F, SAYURI T. The Specialities of Fibre-reinforced Plastics in Terms of Product Lifecycle Management[J]. Journal of Materials Processing Technology, 2005, 162/163:725-729.
[9]FLEISCHER J, ROBERTO T, GISELA L, et al. Composite Materials Parts Manufacturing[J]. CIRP Annals, 2018, 67:603-626.
[10]王子健. 高强钢板料变强度热冲压成形研究及应用[D]. 武汉:华中科技大学,2016.
WANG Zijian. Investigation into Hot Stamping of High Strength Steel with Tailored Tempering Properties[D]. Wuhan:Huazhong University of Science and Technology, 2016.
[11]KWON D J, KIM J H, KIM Y J, et al. Comparison of Interfacial Adhesion of Hybrid Materials of Aluminum/Carbon Fiber Reinforced Epoxy Composites with Different Surface Roughness[J]. Composites Part B:Engineering, 2019, 170:11-18.
[12]ZHU G, YU Q, ZHAO X, et al. Energy-absorbing Mechanisms and Crashworthiness Design of CFRP Multi-cell Structures[J]. Composite Structures, 2020, 233:111631.
[13]LI C, KE L, HE J, et al. Effects of Mechanical Properties of Adhesive and CFRP on the Bond Behavior in CFRP-strengthened Steel Structures[J]. Composite Structures, 2019, 211:163-174.
[14]HE J, XIAN G, ZHANG Y X. Effect of Moderately Elevated Temperatures on Bond Behaviour of CFRP-to-steel Bonded Joints Using Different Adhesives[J]. Construction and Building Materials, 2020, 241:118057.
[15]KIELING R, IHLEMANN J, RIEMER M, et al. A Process and Load Adjusted Coating System for Metallic Inserts in Hybrid Composites[J]. Production Engineering, 2018, 12(2).
[16]ALFONSO L, BADULESCU C, CARRERE N. Use of the Modified Arcan Fixture to Study the Strength of Bonded Assemblies for Automotive Applications[J]. International Journal of Adhesion and Adhesives, 2018, 80:104-114.
[17]荆楠. 碳纤维复合材料连接技术研究[J]. 科技风, 2019(4):206-207.
JING Nan. The Research of Joint Techniques for Carbon Fiber Composite Materials[J]. Technology Wind, 2019(4):206-207.
[18]MATSUZAKI R, SHIBATA M, TODOROKI A. Improving Performance of GFRP/Aluminum Single Lap Joints Using Bolted/Co-cured Hybrid Method[J]. Composites Part A:Applied Science and Manufacturing, 2008, 39:154-163.
[19]曾帝. CFRP帽型梁轴向压溃及三点弯曲特性研究[D]. 长沙:湖南大学, 2018.
ZENG Di. Research on Characteristics of CFRP Hat-shape Beams under Axial Crushing and Three-point Bending[D]. Changsha:Hunan University, 2018.
[20]DEMES M, JANKE N, BEUSCHER J, et al. Process Integration of Hot Stamping Steel and Thermoforming Fibre-reinforced Thermoplastics[J]. Procedia CIRP, 2019, 85:141-146.
[21]许卓. 碳纤维织物增强UHPFRC薄板抗弯性能试验研究[D]. 长沙:湖南大学, 2017.
XU Zhuo. Experimental Study on the Flexure Resistance of UHPFRC Slabs Strengthened with Carbon Fiber Textile[D]. Changsha:Hunan University, 2017.
[22]SADOWSKI T, KNE M, GOLEWSKI P. Experimental Investigations and Numerical Modelling of Steel Adhesive Joints Reinforced by Rivets[J]. International Journal of Adhesion and Adhesives, 2010, 30(5):338-346.