Research on Friction and Wear Characteristics and Simulation of Microstructures Surface Unfolding Wheels

Expand
  • School of Mechanical and Power Engineering, Harbin University of Science and Technology,Harbin,150080

Received date: 2020-08-04

  Online published: 2021-12-04

Abstract

In order to improve the service life and detection accuracy of the unfolding wheels in the AVIKO series steel ball inspection system, and to improve the surface friction coefficient while redu-cing wear, the surface microstructures were applied to the unfolding wheels to study the friction and wear characteristics. Three kinds of pit microstructures with different diameter parameters were processed on the outer surfaces of the test pieces by laser, and the friction coefficient and wear amount were obtained through the tests with a self-designed friction and wear tester, and the distribution of stress and wear depth were obtained by numerical simulation. Compared and analyzed with smooth surface test pieces, the results show that the friction coefficient of the microstructure surface test pieces is larger and the wear amount is smaller under dry sliding friction conditions. The microstructure surface reduces wear and improves wear resistance by changing the stress distribution and dispersing the position of wear points. The established numerical simulation wear model may be used to predict the wear depth of microstructure surface, which provides a basic theory for the life prediction of microstructure surface unfolding wheels.

Cite this article

PAN Chengyi, TONG Yuanqi, CAO Guanqun, ZHAO Yanling . Research on Friction and Wear Characteristics and Simulation of Microstructures Surface Unfolding Wheels[J]. China Mechanical Engineering, 2021 , 32(22) : 2689 -2696 . DOI: 10.3969/j.issn.1004-132X.2021.22.005

References

[1]赵彦玲,赵志强,鲍玉冬,等. 钢球全表面展开原理及方法[J]. 机械工程学报,2016,52(17):205-212.
ZHAO Yanling, ZHAO Zhiqiang, BAO Yudong, et al. The Principle and Method of Unfolding the Whole Surface of Steel Ball[J]. Journal of Mechanical Engineering, 2016, 52(17):205-212.
[2]赵彦玲,夏成涛,王弘博,等. 钢球展开过程运动学及动力学分析[J]. 机械工程学报,2015,51(20):185-192.
ZHAO Yanling, XIA Chengtao, WANG Hongbo, et al. Dynamic Characteristics of Steel Ball Surface Unfolding Process[J]. Journal of Mechanical Engineering, 2015, 51(20):185-192.
[3]张嗣伟. 发展仿生摩擦学的展望[J]. 润滑与密封,2018,43(1):1-2.
ZHANG Siwei. Prospects for the Development of Biomimetic Tribology[J]. Lubrication Engineering, 2018, 43(1):1-2.
[4]KAIRI F, MASAYUKI O, HIROMU H, et al. Bearing Characteristic of Journal Bearing Applied Biomimetics [J]. Tribology International, 2020, 150:106345.
[5]LIANG D, DRAGOS A, PAUL B S, et al. Study on the Characterisation of the PTFE Transfer Film and the Dimensional Designing of Surface Texturing in a Dry-lubricated Bearing System[J]. Wear, 2020, 448/449:1-15. 
[6]HAKAN A, AYDIN B U. An Experimental Investigation on Frictional Behavior of Statically Loaded Micro-grooved Journal Bearing[J]. Tribology International, 2011, 44(12):1942-1948.
[7]DE J, JASON T,FROST J D,et al. Effect of Surface Texturing on CPT Friction Sleeve Measurements[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2001, 127:158-168.
[8]尹必峰,钱晏强,李晓东. 柴油机缸套表面微沟槽织构润滑性能仿真分析[J]. 中国机械工程,2013,24(5):644-650.
YIN Bifeng, QIAN Yanqiang, LI Xiaodong. Simulation Analysis on Lubrication Performance of Surface Micro-croove Texturing on Cylinder Liner in Diesel Engine[J].China Mechanical Engineering, 2013, 24(5):644-650.
[9]SUGIHARA T, ENOMOTO T. Improving Anti-adhesion in Aluminum Alloy Cutting by Micro Stripe Texture[J]. Precision Engineering, 2012, 36:229-237.
[10]KAISEGI N, SUGIMORI H, MORIMOTO H, et al. Development of Cutting Tools with Microscale and Nanoscale Textures to Improve Frictional Behavior[J]. Precision Engineering, 2009, 33(3):248-254.
[11]KANG M, YONG M P, KIM B H, et al. Micro and Nanoscale Surface Texturing Effects on Surface Friction[J]. Applied Surface Science, 2015, 345:344-348.
[12]孙建芳,李傲松,苏峰华,等. 表面织构钛合金的干摩擦和全氟聚醚油润滑下的摩擦学性能[J]. 摩擦学报,2018,38(6):658-664.
SUN Jianfang, LI Aosong, SU Fenghua, et al. Tribological Properties of Titanium Alloy Surface with Different Texture Structure under Dry Friction and Perfluoropolyether Lubrication[J]. Tribology, 2018, 38(6):658-664.
[13]朴占鹏,张克栋,周驰驰,等. 纳米流体与微织构耦合作用对刀具材料摩擦磨损性能的影响研究[J]. 工具技术,2020,54(4):3-10.
PIAO Zhanpeng, ZHANG Kedong, ZHOU Chichi, et al. Coupling Effect of Micro-textures and Nanofluids on Tribological Properties of Cemented Carbide Tools Materials[J]. Tool Engineering, 2020, 54(4):3-10.
[14]张高峰,龙石山,汤爱民,等. 基于划痕法制备的微织构硬质合金摩擦磨损试验研究[J]. 中国机械工程,2014,25(16):2143-2148.
ZHANG Gaofeng, LONG Shishan, TANG Aimin, et al.Experimental Study on Tribological Properties of Textured Cemented Carbide Made by Diamond Scratching[J]. China Mechanical Engineering, 2014, 25(16):2143-2148.
[15]赵彦玲,耿伟,鲍玉冬,等. 钢球检测用展开轮表面微结构增摩降磨特性分析[J]. 摩擦学学报,2017,37(3):348-356. 
ZHAO Yanling, GENG Wei, BAO Yudong, et al. Analysis of Friction and Wear Properties of Microstructure on the Unfolding Wheel Used for Steel Ball Inspection[J]. Tribology, 2017, 37(3):348-356.
[16]孙蒙蒙. 基于有限元方法的钢球展开轮摩擦磨损特性分析[D]. 哈尔滨:哈尔滨理工大学,2017.
SUN Mengmeng. Analysis of Friction and Wear Characteristics of Steel Ball Expansion Wheel Based on ANSYS Method[D]. Harbin:Harbin University of Science and Technology, 2017.
[17]国营长江电工厂,重庆机械研究所. T10W50、Cr1Mo2W50钢结硬质合金[J]. 机械工程材料,1977(3):19-34.
State-owned Yangtze River Power Plant, Chongqing Machinery Research Institute. T10W50 and Cr1Mo2W50 Steel Bonded Cemented Hard Alloy[J]. Materials for Mechanical Engineering, 1977(3):19-34.
[18]XING Youqiang, DENG Jianxin, WU Ze, et al. High Friction and Low Wear Properties of Laser-textured Ceramic Surface under Dry Friction[J]. Optics&Laser Technology, 2017, 93:24-32.
[19]HAMMOUTI S, PASCALE H A, FAURE N, et al. Wear Rate Control of Peek Surfaces Modified by Femtosecond Laser[J]. Applied Surface Science, 2015, 357:1541-1551.
[20]ARCHARD J F, HIRST W. An Examination of a Mild Wear Process[J]. Proceedings of the Royal Society A:Mathematica,Physical and Engineering Science,1957, 238(1215):515-528.
[21]王丽丽,郭少辉,魏聿梁,等. 表面微织构对45#钢摩擦副表面摩擦学性能影响的实验研究[J]. 表面技术,2018,47(12):149-154. 
WANG Lili, GUO Shaohui, WEI Yuliang, et al. Experimental Study on the Influence of Surface Microtexture on the Tribological Properties of 45# Steel Friction Pairs[J]. Surface Technology, 2018, 47(12):149-154.
Outlines

/

〈 〉