Multiple Support Point Reaction Force Calculation Considering Virtual Elastic Stiffness of Support Surfaces

Expand
  • 1.State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology,Dalian,Liaoning,116024
    2.Institute of Construction Machinery,Taiyuan Heavy Industry Co.,Ltd.,Taiyuan,030021
    3.Institute of Materials Handling,Material Flow and Logistics,Technical University of Munich,Munich,85748

Received date: 2020-08-06

  Online published: 2021-12-04

Abstract

Based on the objective physical fact that the supporting surface would make the supporting point move slightly, the micro variable degrees of freedom independent of the macro constraints were introduced to describe the gap function at the support points, and the virtual elastic stiffness of the support surfaces was introduced to describe the resistance of the support surfaces. In order to overcome the difficulty of numerical solution caused by the "switch effect" of virtual elastic stiffness, the transition function was introduced to smooth that. According to the macroscopic force condition, the equilibrium equation was established, and the support reaction of the support points was obtained by solving the nonlinear equations. A variety of support reactions were calculated and compared with the experimental data to verify the effectiveness of the proposed method.

Cite this article

XU Jinshuai, QI Zhaohui, ZHUO Yingpeng, LIU Haibo, GAO Lingchong . Multiple Support Point Reaction Force Calculation Considering Virtual Elastic Stiffness of Support Surfaces[J]. China Mechanical Engineering, 2021 , 32(22) : 2681 -2688,2696 . DOI: 10.3969/j.issn.1004-132X.2021.22.004

References

[1]SATOSHI T, NAOAKI S, TOSHIYUKI K. Analyses of Instability in Mobile Cranes due to Ground Penetration by Outriggers[J]. Journal of Construction Engineering and Management, 2005, 131(6):689-704.
[2]SHAFIUL H, MOHAMED A L-H. Interactive and Dynamic Integrated Module for Mobile Cranes Supporting System Design[J]. Journal of Construction Engineering and Management, 2010, 136(2):179-186.
[3]KILISLAN S, BALKAN T, IDER S K. Tipping Loads of Mobile Cranes with Flexible Booms[J]. Journal of Sound and Vibration, 1999, 223(4):645-657.
[4]张艳伟,孙国正,石来德. 混凝土泵车支腿反力计算及基于ANSYS的支腿结构分析[J]. 中国工程机械学报, 2004,2(3):253-258.
ZHANG Yanwei, SUN Guozheng, SHI Laide. Counterforce Calculation and Structure Analysis Method of Concrete Pumps Stabilizers[J]. Chinese Journal of Construction Machinery, 2004,2(3):253-258.
[5]王健,周静,崔晓琳,等. 五支腿起重机支腿力计算方法研究[J]. 农业装备与车辆工程,2009(11):19-21.
WANG Jian, ZHOU Jing, CUI Xiaolin, et al. The Study on Calculation Method for Five Truck Crane[J]. Agricultural Equipment and Vehicle Engineering, 2009(11):19-21. 
[6]韩玮, 刘志军. 基于平面法求解刚性支承平面多点支承的反力[J]. 建筑机械,2013(7):100-101.
HAN Wei, LIU Zhijun. Solving Rigid Support Plane Multi-point Support Reaction Force Based on Planar Method[J]. Construction Machinery, 2013(7):100-101.
[7]房晓文,陈学东,周振华,等. 汽车起重机支腿反力简化计算方法与实验验证[J]. 起重运输机械, 2012(3):89-92.
FANG Xiaowen, CHEN Xuedong, ZHOU Zhenhua, et al. Simplified Calculation Method and Experimental Verification of Reaction Force of Outrigger of Truck Crane [J]. Hoisting and Conveying Machinery, 2012(3):89-92.
[8]刘振国,滕儒民,吴海帆,等. 一种八支腿起重机支腿反力研究[J]. 机械设计与制造,2015(5):12-15.
LIU Zhenguo, TENG Rumin, WU Haifan, et al. Research on Outrigger Reaction Force of Eight-outrigger [J]. Machinery Design & Manufacture, 2015(5):12-15.
[9]刘永,李扬,张雷雷,等. 高速铁路救援起重机多支撑机构力学解算研究[J]. 机电工程,2018, 35(4):347-351.
LIU Yong, LI Yang, ZHANG Leilei, et al. Mechanical Solution of the Multi-braced Structure of Wreck Crane for High Speed Railway[J]. Journal of Mechanical & Electrical Engineering, 2018, 35(4):347-351. 
[10]崔书文,朱磊,丁宏刚. 一种基于ANSYS接触技术计算汽车起重机支腿反力的新方法[J]. 建筑机械, 2010(15):78-79. 
CUI Shuwen, ZHU Lei, DING Honggang. New Method of Calculating Outrigger Reaction Forces of Truck Crane [J]. Construction Machinery, 2010(15):78-79.
[11]ZHAO Erfei, LU Yongneng, CHENG Kai, et al. Buckling Failure Analysis of Swing Outrigger Used in Pump Truck [J]. Engineering Failure Analysis, 2019, 105:555-565.
[12]KWONHEE S,HISEAK Y. Lifting Capability and Stress Analyses of the Crane System for a Large-sized Tactical Wrecker[J]. International Journal of Automotive Technology, 2018, 19 (5):853-858.
[13]姜旭,申万万,曹娟娟,等. 履带起重机接地比压计算方法及仿真分析研究[J]. 建设机械技术与管理,2016, 29(9):64-67.
JIANG Xu, SHEN Wanwan, CAO Juanjuan, et al. Analysis and Research on the Calculation Method and Simulation for the Ground Pressure of the Crawler Crane [J]. Construction Machinery Technology & Management, 2016, 29(9):64-67. 
[14]PFEIFFER F G. Applications of Unilateral Multibody Dynamics[J]. Philosophical Transactions of the Royal Society A:Mathematical, Physical and Engineering Sciences, 2001, 359(1789):2609-2628.
[15]RICHARD L N,NOAH S S, KYLE K R. A Review of Crane Safety in the Construction Industry[J]. Taylor & Francis Group, 2010, 16(12):1106-1117.
[16]齐朝晖. 多体系统动力学[M]. 北京:科学出版社, 2008:74-78.
QI Zhaohui. Dynamics of Multibody Systems [M]. Beijing:Science Press, 2008:74-78. [17]王琪,庄方方,郭易圆,等. 非光滑多体系统动力学数值算法的研究进展[J]. 力学进展, 2013, 43(1):101-111.
WANG Qi, ZHUANG Fangfang, GUO Yiyuan, et al. Advances in the Research on Numerical Methods for Non-smooth Dynamics of Multibody Systems[J]. Advances in Mechanics, 2013, 43(1):101-111. 
[18]陈敬虞. 关于力的平移定理[J]. 宁夏工学院学报, 1997, 9(2):87-88.
CHEN Jingyu. The Translation Theorem of Force[J]. Journal of Ningxia Institute of Technology, 1997, 9(2):87-88. 
[19]FLORES P, AMBRSIO J, CLARO P J C, et al. Kinematics and Dynamics of Multibody Systems with Imperfect Joints [M]. New York:Springer, 2008:57-59.
[20]富立,王琪,彭慧莲,等. 含摩擦滑移铰多体系统动力学的LCP建模及数值方法[J]. 工程力学, 2010, 27(11):34-39.
FU Li, WANG Qi, PENG Huilian, et al. Modeling and Numerical Method of Multi-body System with Friction-affceted Sliding Joints Based on LCP[J].  Engineering Mechanics, 2010, 27(11):34-39.
[21]荣国瑞. 汽车起重机支腿压力的新算法[J]. 重庆建筑大学学报, 1997,19(3):54-60.
RONG Guorui. A New Algorithm of the Pressure on the Outrigger of the Truck Crane[J]. Journal of Chongqing Jianzhu University, 1997,19(3):54-60.
Outlines

/

〈 〉