The data acquisition method of the machining processes was studied. The processing conditions were discretized in time domain and space, and the voxel model was introduced to subdivide and mark the part space and machining process signals. The short-time domain processing method was used to characterize the machining process signals as corresponding short-time domain signal characteristics. Thus, the knowledge association between the unit voxel working condition and the processing signals was established, and the time-position mapping model of the processing data and the part processing position was established. Finally, taking blade rough milling as an example, the spindle power was visualized and analyzed through the time-position mapping model based on processing signals. The power cloud map was generated, which clearly located the power out-of-tolerance area in blade machining, evaluated the machining state, and provided a basis for processing parameter optimization.
ZHANG Ying, ZHANG Yang, XIA Weihong, WU Baohai, ZHANG Dinghua,
. Monitoring and Visual Analysis of Processing Data Based on Time-Position Mapping[J]. China Mechanical Engineering, 2021
, 32(20)
: 2449
-2457
.
DOI: 10.3969/j.issn.1004-132X.2021.20.007
[1]GUO Yuan, SUN Yu, WU Kai. Research and Development of Monitoring System and Data Monitoring System and Data Acquisition of CNC Machine Tool in Intelligent Manufacturing[J]. International Journal of Advanced Robotic Systems, 2020, 17(2):1-12.
[2]WANG Wei, LI Hai, HUANG Pu, et al. Data Acquisition and Data Mining in the Manufacturing Process of Computer Numerical Control Machine Tools[J]. Proceedings of the Institution of Mechanical Engineers Part B:Journal of Engineering Manufacture, 2018, 232(13):2398-2408.
[3]刘阳. 基于PLC远程多点数据采集系统的设计与实现工作[J]. 信息通信, 2014(9):69-70.
LIU Yang. Design and Implementation of a Remote Multi-point Data Acquisition System Based on PLC[J]. Information Communication, 2014(9):69-70.
[4]孙艳. 基于PLC的数据采集监控实验系统研究[J]. 微型机与应用, 2013, 32(11):92-94.
SUN Yan. Research on Data Acquisition and Monitoring Experiment System Based on PLC[J]. Microcomputer and Application, 2013, 32(11):92-94.
[5]SHENG Zhongqi, LIANG Zezhong, ZHANG Chaobiao, et al. LabVIEW-Based Wireless Monitoring System of CNC Machine Tools[J]. Applied Mechanics and Materials, 2012, 121:2075-2079.
[6]CAO Xiaobin, ZHANG Xiangli, ZHANG Hongmei. A Data Acquisition System of CNC Based on Zigbee and GPRS Technology[C]. IEEE Advanced Information Management, Communicates, Electronic andAutomation Control Conference. Xian, 2016:1188-1191.
[7]WONG S Y, CHUAH J H, YAP H J. Technical Data-driven Tool Condition Monitoring Challenges for CNC Milling:A Review[J]. International Journal of Advanced Manufacturing Technology, 2020, 107(11/12):4837-4857.
[8]DE LACALLE L N L, LAMIKIZ A, SANCHEZ J A, et al. Recording of Real Cutting Forces Along the Milling of Complex Parts[J]. Mechatronics, 2006, 16(1):21-32.
[9]DE LACALLE L N L, LAMIKIZ A, SANCHEZ J A, et al. Toolpath Selection Based on the Minimum Deflection Cutting Forces in the Programming of Complex Surfaces Milling[J]. International Journal of Machine Tools and Manufacture, 2007, 47(2):388-400.
[10]KLOCKE F, KRATZ S, VESELOVAC D. Position-oriented Process Monitoring in Freeform Milling[J]. CIRP Journal of Manufacturing Science and technology, 2008, 1(2):103-107.
[11]BRAZEL E. Power and Position-oriented Process Monitoring of Freeform Abrasive Machining[D]. Dublin:Trinity College Dublin, 2013.
[12]BRAZEL E, HANLEY R, CULLINANE R, et al. Position-oriented Process Monitoring in Freeform Abrasive Machining[J]. International Journal of Advanced Manufacturing Technology, 2013, 69(5/8):1443-1450.
[13]KRATZ S. Position-Oriented Vibration Monitoring of Finish Milling Thin-walled Components[M]. Aachen:Apprimus-Verlag, 2011:45-49.
[14]储晓承. 开放式CNC机床加工过程状态监测技术研究[D]. 南京:南京航空航天大学, 2011.
CHU Xiaocheng. Research on State Monitoring Technology of open CNC Machine Tool Processing[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2011.
[15]ZHANG Y J. Research and Application of DDE Network Communication in Configuration Software[J]. Applied Mechanics and Materials, 2013, 401-403:1935-1938.