The coarse grains and hard precipitates in the laser cladding layers had adverse effects on the corrosion resistance and impact resistance. The effects of pulse frequency on microstructure and properties of the coating were studied by pulse laser cladding technology. The microstructure of the coating was characterized by scanning electron microscope (SEM)morphology. High speed camera and numerical simulation method were used to analyze the shapes and temperature changes of molten pools. The hardness, wear resistance, impact resistance and corrosion resistance of the coating were tested by microhardness tester, wear tester, charpy impact tester and electrochemical corrosion tester respectively. The results show that the microstructure of the coating coarsens with the increase of pulse frequency. At the same time, the numbers of precipitates in the coating decrease first and then increase. The wear resistance of the coating decreases with the increase of pulse frequency. The wear resistance of the coating is the best because the microstructure of the coating is refined and there are fine hard precipitates at 20 Hz. The impact resistance and corrosion resistance of the coating increase first and then decrease with the increase of pulse frequency. Because the amount of hard phase in the coating decreases obviously at 80 Hz, the coating has the best impact resistance and corrosion resistance.
LI Yunfeng, SHI Yan,
. Influences of Pulse Frequency on Microstructure and Properties in Laser Cladding Layers[J]. China Mechanical Engineering, 2021
, 32(17)
: 2108
-2117,2124
.
DOI: 10.3969/j.issn.1004-132X.2021.17.012
[1]LEPSKI D, BRUCKNER F. Laser Cladding[M]. Amsterdam:Springer, 2009:121-123.
[2]李英男, 李铸国, 王晓翔, 等. 道岔尖轨表面的激光熔覆铁基耐磨涂层及其性能[J]. 中国激光, 2020, 47(4):402009.
LI Yingnan, LI Zhuguo, WANG Xiaoxiang, et al. Fe-based Wear-resistant Coating on Railroad Switch Prepared Using Laser Cladding Technology and Its Properties[J]. Chinese Journal of Lasers, 2020, 47(4):402009.
[3]崔宸, 武美萍, 夏思海. 热处理对42CrMo钢表面激光熔覆钴基涂层性能的影响[J]. 中国激光, 2020, 47(6):602011.
CUI Chen, WU Meiping, XIA Sihai. Effect of Heat Treatment on Properties of Laser Cladding Cobalt-based Coating on 42CrMo Steel Surface[J]. Chinese Journal of Lasers, 2020, 47(6):602011.
[4]GUO Huoming, WANG Qian, WANG Wenjian, et al. Investigation on Wear and Damage Performance of Laser Cladding Co-based Alloy on Single Wheel or Rail Material[J]. Wear, 2015, 3(2):154-159.
[5]何珊珊, 于治水, 张培磊, 等. 亚微米TiC/B4C颗粒对激光熔覆Stellite涂层组织及性能影响[J]. 中国激光, 2019, 46(3):302010.
HE Shanshan, YU Zhishui, ZHANG Peilei, et al. Effect of Sub-micron TiC/B4C Particle on Microstructures and Properties of Laser Cladded Stellite Coatings[J]. Chinese Journal of Lasers, 2019, 46(3):302010.
[6]曹俊, 卢海飞, 鲁金忠, 等. WC对激光熔覆热作模具的组织和磨损性能的影响[J]. 中国激光, 2019, 46(7):702001.
CAO Jun, LU Haifei, LU Jinzhong, et al. Effects of Tungsten Carbide Particles on Microstructure and Wear Resistance of Hot-working Die Prepared via Laser Cladding[J]. Chinese Journal of Lasers, 2019, 46(7):702001.
[7]任维彬, 周金宇, 张锁荣, 等. K418高温合金叶轮脉冲激光再制造形状与性能控制[J]. 稀有金属材料与工程, 2019, 48(10):3315-3319.
REN Weibin, ZHOU Jinyu, ZHANG Suorong, et al. Forming and Performance Control of Pulsed Laser Remanufacturing for K418 Alloy Impeller[J]. Rare Metal Materials and Engineering, 2019, 48(10):3315-3319.
[8]赖境, 路媛媛, 张航, 等. 低热输入脉冲激光修复高温合金液化裂纹研究[J]. 中国激光, 2019, 46(4):402011.
LAI Jing, LU Yuanyuan, ZHANG Hang, et al. Liquation Cracks in Superalloys Repaired by Low-heat Input Pulsed Laser[J]. Chinese Journal of Lasers, 2019, 46(4):402011.
[9]FLEMINGS M C. Solidification Processing[M]. New York:Materials Science and Technology, 2006:100-101.
[10]SURESH K K. Analytical Modeling of Temperature Distribution, Peak Temperature, Cooling Rate and Thermal Cycles in a Solid Work Piece Welded by Laser Welding Process[J]. Procedia Materials Science, 2014, 6:821-834.
[11]ZHANG Hui, ZOU Yong, ZOU Zengda, et al. Comparative Study on Continuous and Pulsed Wave Fiber Laser Cladding In-situ Titanium-Vanadium Carbides Reinforced Fe-based Composite Layer[J]. Materials Letters, 2015, 139:255-257.
[12]毛卫民, 朱景川, 郦剑, 等. 金属材料结构与性能[M]. 北京:清华大学出版社, 2008:102-103.
MAO Weimin, ZHU Jingchuan, LI Jian, et al. Structure and Properties of Metallic Materials[M]. Beijing:Tsinghua University Press, 2008:102-103.
[13]胡赓祥, 蔡珣, 戎咏华. 材料科学基础[M]. 上海:上海交通大学出版社, 2010:115-116.
HU Gengxiang, CAI Xun, RONG Yonghua. Fundamentals of Materials Science[M]. Shanghai:Shanghai Jiao Tong University Press, 2010:115-116.
[14]PEI Changhao, SHI Dong, YUAN Huang, et al. Assessment of Mechanical Properties and Fatigue Performance of a Selective Laser Melted Nickel-base Superalloy Inconel 718[J]. Materials Science and Engineering:A, 2019, 759:278-287.
[15]LI Liu, LI Ying, WANG Fuhui. Influence of Grain Size on the Corrosion Behavior of a Ni-based Superalloy Nanocrystalline Coating in NaCl Acidic Solution[J]. Electrochimica Acta, 2008, 53(5):2453-2462.