In order to predict the welding deformation of dissimilar steel structures quickly and accurately, a thermo-elastic-plastic finite element method was developed to simulate the residual stress and deformation of dissimilar steel welded joints. Based on this method, the inherent strain of Q345/SUS304 dissimilar steel plate butt joints and T-joints was studied. Furthermore, for complex Q345/SUS304 dissimilar steel welded structures, the inherent strain method and the traditional thermo-elastic-plastic finite element method were used to predict and compare the welding deformations. The results show that with the increase of the heat input parameter Q/h2, the tendon forces and transverse shrinkages increase approximately linearly, and the relationship among them and Q/h2 is obtained, while the angular deformations increase first and then decrease, which reach the peak value around Q/h2=12 J/mm3. The laws may provide references for prediction and control of welding deformations of large dissimilar steel structures in engineering.
LI Yuantai, WU Huaxin, DONG Bin, XIAO Shenchong
. Study on Variation Laws of Inherent Strain of Q345/SUS304 Dissimilar Steel Welded Joints#br#[J]. China Mechanical Engineering, 2021
, 32(15)
: 1868
-1873
.
DOI: 10.3969/j.issn.1004-132X.2021.15.013
[1]黄本生, 黄龙鹏, 李慧. 异种金属焊接研究现状及发展趋势[J]. 材料导报, 2011, 25(23):118-121.
HUANG Bensheng, HUANG Longpeng, LI Hui. Research Status and Development Trend of Dissimilar Metals Welding[J]. Materials Reports, 2011, 25(23):118-121.
[2]张伯奇, 蔡志鹏, 李克俭, 等. 异种钢焊接接头蠕变过程的有限元模拟[J]. 中国机械工程, 2015, 26(2):266-271.
ZHANG Boqi, CAI Zhipeng, LI Kejian, et al. Finite Element Analysis of Creep Behavior of Dissimilar Steel Welded Joint[J]. China Mechanical Engineering, 2015, 26(2):266-271.
[3]DENG D, MURAKAWA H, LIANG W. Numerical and Experimental Investigations on Welding Residual Stress in Multi-pass Butt Welded Austenitic Stainless Steel Pipe[J]. Computational Materials Science, 2008, 42:234-244.
[4]UEDA Y, YAMAKAWA T, Analysis of Thermal Elastic Plastic Stress and Strain during Welding by Finite Element Method[J]. Japan Welding Society Transactions, 1971, 2(2):90-100.
[5]UEDA Y, YUAN M G. The Characteristics of the Source of Welding Residual Stress (Inherent Strain)and Its Application to Measurement and Prediction[J]. Japan Welding Society Transactions, 1991, 20 (2):119-127.
[6]HUANG H, WANG J, LI L, et al. Prediction of Laser Welding Induced Deformation in Thin Sheets by Efficient Numerical Modeling[J]. Journal of Materials Processing Technology, 2016, 227:117-128.
[7]DENG D, MURAKAWA H, LIANG W. Numerical Simulation of Welding Distortion in Large Structures[J]. Computer Methods in Applied Mechanics and Engineering, 2007, 196(45/48):4613-4627.
[8]WANG R, RASHED S, SERIZAWA H, et al. Numerical and Experimental Investigations on Welding Deformation[J]. Transactions of JWRI, 2008, 37 (1):79-90.
[9]WANG R, RASHED S, SERIZAWA H, et al. Study on Welding Inherent Deformations in Welded Structural Materials[J]. Transactions of JWRI, 2008, 37 (1):91-100.
[10]王林, 潘骏, 贺青川, 等. 后倾式离心风机叶轮机器人焊接工艺优化[J]. 中国机械工程, 2020, 31(19):2379-2387.
WANG Lin, PAN Jun, HE Qingchuan, et al. Welding Process Optimization on Robot Welding of the Backward Centrifugal Fan Impeller[J]. China Mechanical Engineering, 2020, 31(19):2379-2387.
[11]蔡建鹏, 何静, 张彦杰, 等. Q345 /SUS304异种钢对接接头残余应力和变形的分析[J]. 焊接学报, 2016, 37(1):71-75.
CAI Jianpeng, HE Jing, ZHANG Yanjie, et al. Study on Welding Residual Stress and Distortion of Q345/SUS304 Dissimilar Steel Butt Weld[J]. Transactions of the China Welding Institution, 2016, 37(1):71-75.
[12]黄本生, 陈权, 杨江, 等. Q345/316L异种钢焊接残余应力与变形数值模拟[J]. 焊接学报, 2019, 40(2):138-144.
HUANG Bensheng, CHEN Quan, YANG Jiang, et al. Simulation on Welding Residual Stress and Distortion of Q345/316L Dissimilar Steel Welding Joints[J]. Transactions of the China Welding Institution, 2019, 40(2):138-144.
[13]WHITE J D, LEGGATT R H, DWIGHT J B. Weld Shrinkage Prediction[J]. Welding and Metal Fabrication, 1980, 11(9):567-596.
[14]COTTRELL C L M. Controlled Thermal Sevirity Cracking Test Simulates Practical Welded Joints[J]. Welding Journal, 1953, 32:257-272.