The non-destructive connection between 6061-T6 aluminum alloy and HC340/590DP duplex steel with large performance differences was studied. The forming law of the steel-aluminum clinching processes and the connection quality under different joints were studied through tests. The qualities of the joints between the upper steel-lower aluminum and the upper aluminum-lower steel were studied respectively. The influences of forming forces on the joints quality were quantified by using the important processing parameters such as neck thickness, undercut and bottom thickness of the forming sections. The strength and energy absorption of clinched joints were studied by tensile shear tests. The results show the quality of clinched joints is good when the forming force is as 40 kN, and the strength and safety of the joints meet the requirements of design index.
LI Qihan, XU Chuanwei, GAO Song, HAN Xiaoheng, ZHAO Qingming, GU Dongwei, MA Fenglei
. Clinching Test for High Strength Steel-Aluminum Alloy Dissimilar Material Sheets#br#[J]. China Mechanical Engineering, 2021
, 32(15)
: 1861
-1867
.
DOI: 10.3969/j.issn.1004-132X.2021.15.012
[1]庄蔚敏, 赵文增, 解东旋, 等. 超高强钢/铝合金热铆连接接头性能[J]. 吉林大学学报(工学版), 2018, 48(4):1016-1022.
ZHUANG Weimin, ZHAO Wenzeng, XIE Dongxuan, et al. Joint Performance Analysis on Connection of Ultrahigh-strength Steel and Aluminum Alloy with Hot Riveting[J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(4):1016-1022.
[2]庄蔚敏, 赵文增, 解东旋, 等. 22MnB5高强钢/7075铝合金热铆接冷模具淬火无铆钉铆接研究[J]. 机械工程学报, 2017, 53(20):106-112.
ZHUANG Weimin, ZHAO Wenzeng, XIE Dongxuan, et al. Research on Hot Riveting Quenching Clinching of the High Strength Steel 22MnB5 and Aluminum Alloy 7075[J]. Journal of Mechanical Engineering, 2017, 53(20):106-112.
[3]SACHIN J, SUDHIR K, SANJEEV K. Characterization and Optimization of Flat Friction Stir Spot Welding of Triple Sheet Dissimilar Aluminium Alloy Joints[J]. Silicon, 2021(1):1-16.
[4]QIAN Anghua. An Overview of Self-piercing Riveting Process with Focus on Joint Failures, Corrosion Issues and Optimisation Techniques[J]. Chinese Journal of Mechanical Engineering, 2021, 34(1):100-124.
[5]LEE C J, LEE J M, RYU H Y, et al. Design of Hole-clinching Process for Joining of Dissimilar Materials-Al6061-T6-T4 Alloy with DP780 Steel, Hot-pressed 22MnB5 Steel, and Carbon Fiber Reinforced Plastic[J]. Journal of Materials Processing Technology, 2014, 214(10):2169-2178.
[6]MARCIO B T, SERGIO F L, MANOLO L G, et al. The Influence of Tool Geometry and Process Parameters on Joined Sheets by Clinching[J]. Journal of the Brazilian Society of MecUS-LAnical Sciences and Engineering, 2019, 41(2):67.
[7]GE Yulong, XIA Yong. Mechanical Characterization of a Steel-Aluminum Clinched Joint under Impact Loading[J]. Thin-Walled Structures, 2020, 151:106759.
[8]沈永飞, 何冠中, 楼铭, 等. 铝合金与静音钢异种材料匹配无铆钉铆接成形特性[J]. 机械设计与研究, 2018, 34(1):103-106.
SHEN Yongfei, HE Guanzhong, LOU Ming, et al. Forming Characteristics of Rivet Free Riveting of Aluminum Alloy and Silent Steel[J]. Mechanical Design and Research, 2018, 34(1):103-106.
[9]SEBASTIAN W, MATTHIAS G, MARION M. Influence of the Properties of the Joining Partners on the Load-bearing Capacity of Shear-clinched Joints[J]. Journal of Materials Processing Technology, 2020, 283:116696.
[10]JIANG Hao, ZENG Chaochao, LI Guangyao, et al. Effect of Locking Mode on Mechanical Properties and Failure Behavior of CFRP/Al Electromagnetic Riveted Joint[J]. Composite Structures, 2021, 257:113162.
[11]JIANG H, HONG Z, LI G, et al. Numerical and Experiment Investigation on Joining Process and Failure Behaviors of CFRP/Al Electromagnetic Riveted Joint[J]. Mechanics of Advanced Materials and Structures, 2020:1-17.
[12]刘鑫. 预制孔式无铆钉连接工艺机理与接头质量优化方法研究[D]. 济南:山东大学, 2019.
LIU Xin. Research on Mechanism of Preformed Hole Type Rivetless Connection and Joint Quality Optimization Method[D]. Jinan:Shandong University, 2019.
[13]陈超, 赵升吨, 崔敏超, 等. 铆压重塑形工艺的铆钉优化与试验研究[J]. 西安交通大学学报, 2016, 50(3):94-100.
CHEN Chao, ZHAO Shengdun, CUI Minchao, et al. Rivet Optimization and Experimental Research on the Reshaping Method[J]. Journal of Xian Jiaotong University, 2016, 50(3):94-100.
[14]CHEN Chao, ZHAO Shengdun, HAN Xiaolan, et al. Experimental Investigation of the Mechanical Reshaping Process for Joining Aluminum Alloy Sheets with Different Thicknesses[J]. Journal of Manufacturing Processes, 2017, 26:105-112.
[15]CHEN Chao, RAN Xiangkun, PAN Qing, et al. Research on the Mechanical Properties of Repaired Clinched Joints with Different Forces[J]. Thin-Walled Structures, 2020, 152:106752.
[16]HE Xiaocong, YU Tongxin, GAO Aifeng, et al. Investigations of Join-ability and Energy Absorption of Clinched Joints in Titanium and Aluminum-Lithium Sheet Materials[J]. Materials Transactions, 2016, 57(10):1849-1852.
[17]CHAN J L, JAE Y K, SANG K L, et al. Design of Mechanical Clinching Tools for Joining of Aluminium Alloy Sheets[J]. Materials & Design, 2010, 31(4):1854-1861.