Torsional Impact Fatigue Test Method for Electric Vehicle Differentials

Expand
  • Key Laboratory of Advanced Manufacturing and Test Technology for Automobile Parts of Ministry of Education, Chongqing University of Technology, Chongqing, 400054

Received date: 2020-09-21

  Online published: 2021-06-24

Abstract

According to the actual load situation of the differential which were the key component of the electric vehicle transmission systems, a torsional impact fatigue test system for the differentials of the electric vehicles was designed based on hydraulic servo. The stress concentration parts of the key components of the differentials were analyzed under the current test technical conditions, and the loading waveform, loading frequency, loading amplitude and loading frequency were researched in theory and load characteristics. The torsional impact fatigue strain test system and test method of electric vehicle differentials were constructed, and a large number of strain tests were carried out. The test data of different frequencies and amplitudes were statistically analyzed. Combined with the analysis results and the material stress-life (S-N) curve, a complete torsional impact fatigue test method of electric vehicle differentials was established. The results indicate that the fatigue failure site and form of differentials are consistent with those of real vehicles and stress concentration measuring points.

Cite this article

ZOU Xihong, LI Jinxiao, HU Qiuyang, XI Shuaijie, FU Lingfeng, YUAN Dongmei . Torsional Impact Fatigue Test Method for Electric Vehicle Differentials[J]. China Mechanical Engineering, 2021 , 32(11) : 1377 -1385 . DOI: 10.3969/j.issn.1004-132X.2021.11.015

References

[1]张书桥.电动汽车发展现状及前景分析[J].电气时代,2019(9):12-15.
ZHANG Shuqiao. Analysis of the Development Status and Prospect of Electric Vehicles[J]. Electrical Times, 2019(9):12-15.
[2]王文楷. 基于电机转矩波动抑制的电动汽车传动系扭振控制研究[D].长春:吉林大学,2018.
WANG Wenkai. Torsional Vibration Control for Driveline of a Electric Car Based on Motor Torque Ripple Suppression[D]. Changchun:Jilin University, 2018.
[3]SUHANE A, RANA R S, PUROHIT R. Prospects of Torsen Differential in Four Wheel Drive Automobile Transmission System[J]. Materials Today:Proceedings,2018,5(2):4036-4045.
[4]周新建,于孟,查小净,等.差速器齿轮机构的运动学及动力学分析[J].机械传动,2010,34(3):18-21.
ZHOU Xinjian, YU Meng, ZHA Xiaojing, et al.The Kinematic and Dynamic Analysis of the Gear Mechanism of Differential[J]. Mechanical Transmission, 2010,34(3):18-21.
[5]陈延伟,高智,王跃光,等.基于虚拟仪器的汽车传动系冲击性能检测系统[J].长春工业大学学报(自然科学版),2009,30(4):451-456.
CHEN Yanwei, GAO Zhi, WANG Yueguang, et al. Automobile Power Train Impacting Durability Test System[J].Journal of Changchun University of Technology (Natural Science Edition), 2009,30(4):451-456.
[6]张邦成,王跃光,王占礼,等.汽车传动系冲击耐久工况台架测试模拟[J].武汉理工大学学报,2010,32(2):76-79.
ZHANG Bangcheng, WANG Yueguang, WANG Zhanli, et al. Simulation on Impacting Durability Running Conditions for Automobile Power Train Bench Test[J]. Journal of Wuhan University of Technology, 2010,32(2):76-79.
[7]张邦成,王占礼,邵春平,等.汽车传动系总成冲击耐久试验台检测系统的研究[J].机床与液压,2007(10):143-146.
ZHANG Bangcheng, WANG Zhanli, SHAO Chunping,et al. The Study of Automobile Power Train Impacting Durability Test-bed Detection System[J]. Machine Tool&Hydraulics, 2007(10):143-146.
[8]曹占勇,何锋,徐柱,等.电动汽车动力传动系转矩波动抑制研究[J].电气传动,2020,50(1):91-94.
CAO Zhanyong, HE Feng, XU Zhu, et al. Research on Torsional Vibration Suppression of Electric Vehicle Driveline[J]. Electric Drive, 2020,50(1):91-94.
[9]李占江. 纯电动汽车传动系统冲击抑制控制[D].长春:吉林大学,2016.
LI Zhanjiang. Anti-jerk Control of Driving System in Electric Vehicle[D]. Changchun:Jilin University, 2016.
[10]王亮,许爱芬,樊智涛,等.汽车差速器总成试验台的研制[J].军事交通学院学报,2019,21(8):31-35.
WANG Liang, XU Aifen, FAN Zhitao, et al. Development of Test Bench for Automobile Differential Assembly[J]. Journal of Military Transportation University, 2019,21(8):31-35.
[11]刘铁军,张邦成,王占礼,等.汽车传动系冲击耐久性试验台控制系统建模及仿真分析[J].长春工业大学学报(自然科学版),2011,32(2):109-114.
LIU Tiejun, ZHANG Bangcheng, WANG Zhanli, et al. Modeling and Simulation of Automobile Power Train Impacting Durability Test Rig Control System[J]. Journal of Changchun University of Technology (Natural Science Edition), 2011,32(2):109-114.
[12]PAN Y W, YU Q Y, WANG F. Failure Analysis of Automotive Differential Based on the Fault Tree[J]. Advanced Materials Research, 2014, 1049/1050:871-874.
[13]邓文华.差速器内一字轴断裂原因分析及改进[J].汽车零部件,2017(3):68-70.
DENG Wenhua. Reasons Analysis and Improvement of One-line Shaft Breakage in Differential[J]. Automobile Parts, 2017(3):68-70.
[14]郑月珍,徐勤效.冲击试验波形检测[J].工业控制计算机,2010,23(2):93-94.
ZHENG Yuezhen, XU Qinxiao. Waveform Detection of Impact Test[J]. Industrial Control Computer, 2010,23(2):93-94.
[15]宋鹍,王佳斌,丁军,等.应力波加载下20CrMnTi钢动态起裂韧性的实验-数值研究[J].重庆理工大学学报(自然科学版),2020,34(8):122-127.
SONG Kun, WANG Jiabin, DING Jun, et al.Experimental and Numerical Study on Dynamic Initiation Toughness of 20CrMnTi Steel under Stress Wave Loading[J]. Journal of Chongqing University of Technology (Natural Science), 2020,34(8):122-127.
[16]赵翼飞,白争锋,杨斌久.最优应力波形下的冲击机械冲锤部件的反演设计及参数优化[J].振动与冲击,2016,35(7):102-109.
ZHAO Yifei, BAI Zhengfeng, YANG Binjiu. Impactor’s Inverse Design and Parametric Optimization of an Impact Machinery Based on Optimal Stress Waveform[J].Journal of Vibration and Impact, 2016,35(7):102-109.
[17]薛慧,宋锦良,贾有权.冲击作用下的载荷波形对动态应力集中系数的影响[J].机械设计,1995(11):23-26.
XUE Hui, SONG Jinliang, JIA Youquan. Influence of Load Waveform under Impact on Dynamic Stress Concentration Coefficient[J]. Mechanical Design, 1995(11):23-26.
[18]金庆铭.冲击试验波形的机械模拟[J].振动与冲击,1995(4):46-51.
JIN Qingming. Mechanical Simulation of Shock Test Waveform[J]. Journal of Vibration and Shock, 1995(4):46-51.
[19]李盼菲.电阻应变测量中提高精度的方法研究[J].计量与测试技术,2019,46(12):62-64.
Li Panfei. Research on Method of Improving Accurary in Resistance Strain Measurement Technology[J]. Metrology&Measurment Technique, 2019,46(12):62-64.
[20]毛稼祥,刘继承. 汽车车桥应变标定测力方法及应用[C]//中国汽车工程学会.2019中国汽车工程学会年会论文集(4).上海:中国汽车工程学会,2019:1625-1628.
MAO Jiaxiang,LIU Jicheng. Measurement Method and Application of Strain Calibration to Force for Vehicle Axle[C]//China Society of Automotive Engineers. Proceedings of 2019 Annual Meeting of China Society of Automotive Engineers (4). Shanghai: China Society of Automotive Engineers, 2019:1625-1628.
[21]蒋正忠,黄才贵,常青青.基于LabVIEW应力测量系统的设计分析[J].机电工程技术,2020,49(3):118-120.
JIANG Zhengzhong, HUANG Caigui, CHANG Qingqing. Design and Analysis of Stress Measurement System Based on LabVIEW[J]. Mechanical & Electrical Engineering Technology, 2020,49(3):118-120.
[22]李林鑫,银强,任小鸿.差速器半轴齿断齿原因分析与结构改进[J].金属加工(冷加工),2017(16):64-66.
LI Linxin, YIN Qiang, REN Xiaohong. Reasons Analysis and Structural Improvement of Differential Half-shaft Tooth Breakage[J]. Metal Working (Cold Working), 2017(16):64-66.
[23]陈超,李猛猛,郑攀,等.基于Workbench差速器齿轮的疲劳分析[J].机械与电子,2018,36(10):3-6.
CHEN Chao, LI Mengmeng, ZHENG Pan, et al. Fatigue Analysis Based on Workbench Differential Gear[J]. Mechanical&Electronics, 2018,36(10):3-6.
[24]王秋平. 汽车差速器的建模与强度分析[D].沈阳:东北大学,2014.
WANG Qiuping. Modeling and Analysis of the Strength on Automobile Differential[D]. Shenyang:Northeastern University, 2014.
[25]邹喜红,向辉,李金晓,等.电动汽车减速器冲击疲劳试验方法研究[J].重庆理工大学学报(自然科学版),2020,34(6):25-31.
ZOU Xihong,XIANG Hui,LI Jingxiao,et al.Study on Impact Fatigue Test Method of Electric Vehicle Reducer[J].Journal of Chongqing University of Technology(Natural Science), 2020,34(6):25-31.
[26]赵少汴.抗疲劳设计手册[M]. 2版.北京:机械工业出版社,2015:20-25.
ZHAO Shaobian. Anti-fatigue Design Manual[M].2nd ed. Beijing:China Machine Press, 2015:20-25.
[27]《机械工程材料性能数据手册》编委会.机械工程材料性能数据手册[M].北京:机械工业出版社,1995:163-165.
The Editorial Board of Handbook of Mechanical Engineering Material Performance. Handbook of Mechanical Engineering Material Performance[M]. Beijing:China Machine Press, 1995:163-165.
[28]夏鋆. 电动汽车减速器疲劳寿命分析与预测方法研究[D].重庆:重庆理工大学,2020.
XIA Jun.Research on Fatigue Life Analysis and Prediction Method of Electric Vehicle Gear Reducer[D]. Chongqing:Chongqing University of Technology,2020.
[29]杨新华.疲劳与断裂[M]. 2版.武汉:华中科技大学出版社,2002:34-36.
YANG Xinhua.Fatigue and Fracture[M] . 2nd ed.Wuhan:Huazhong University of Science and Technology Press,2002:34-36.
[30]刘俭辉,吕鑫,韦尧兵,等.考虑附加强化效应及平均应变的多轴疲劳寿命预估[J].中国机械工程,2020,31(3):314-320.
LIU Jianhui,LYU Xin, WEI Yaobing,et al.Multiaxial Fatigue Life Prediction Considering Additional Hardening Effects and Mean Stains[J].China Mechanical Engineering,2020,31(3):314-320.
Outlines

/

〈 〉