Temperature Distribution of Treads and Wear Prediction during Train Emergency Braking

  • DONG Yonggang1 ,
  • YI Shuai1 ,
  • HUANG Xinlei1 ,
  • SONG Jianfeng1 ,
  • DU Xiaozhong2
Expand
  • 1. School of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei,066004
    2. School of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan,030024

Received date: 2020-06-22

  Online published: 2021-02-27

Abstract

The rapid increases of tread temperature during the emergency braking processes of the trains caused the friction and wear mechanism of the wheel tread to be significantly different from that during steady state operations. In order to accurately predict the wear of the trains emergency braking tread, the wheel tread contact with the rail and the brake shoe was also considered during the tread braking processes, the thermal-mechanical coupling finite element model of tread braking processes was established based on ABAQUS finite element software, the impacts of braking temperature rise on the mechanical properties, hardness and friction coefficient of the wheel treads were comprehensively considered,  the temperature distribution, hardness distribution and contact stress distribution on the wheel tread during emergency braking were obtained by simulation, the wheel-rail dynamics software UM was used to obtain the wheel-rail contact spot shapes and the wheel-rail creep area relative slip distribution during the emergency braking processes. Then, the Archard wear model wass used to determine the tread wear depth after a single emergency braking with quantitative predictions. The results show that for the two working conditions of the initial braking speed of 130 km/h and 160 km/h, the highest tread temperature reach 397.0 ℃ and 4859 ℃ respectively, the cumulative maximum wear depthes of the tread are 590 μm and 7.43 μm, respectively. Compared with the tread braking experiments, it is found that the wear position and topography distribution trend are consistent.

Cite this article

DONG Yonggang1 , YI Shuai1 , HUANG Xinlei1 , SONG Jianfeng1 , DU Xiaozhong2 . Temperature Distribution of Treads and Wear Prediction during Train Emergency Braking[J]. China Mechanical Engineering, 2021 , 32(04) : 431 -438,445 . DOI: 10.3969/j.issn.1004-132X.2021.04.007

References

[1]肖绯雄,陈旭.恶劣工况下货车高摩合成闸瓦磨损分析[J].北京交通大学学报,2014,38(4):20-25.
XIAO Feixiong,CHEN Xu.Analysis on the Wear of High Friction Synthetic Brake Shoes of Freight Cars under Severe Working Conditions[J].Journal of Beijing Jiaotong University,2014,38(4):20-25.
[2]杨新文,顾少杰,周顺华,等.30 t轴质量重载铁路轮轨滑动接触引起的钢轨热相变分析[J].铁道学报,2016,38(7):84-90.
YANG Xinwen, GU Shaojie, ZHOU Shunhua,et al. Analysis of Thermal Phase Transformation of Rail Caused by Sliding Contact between 30 t Axle and Heavy Load Railway Wheel and Rail[J]. Journal of the China Railway Society, 2016,38(7): 84-90.
[3]陈帅,吴磊,张合吉,等. 踏面制动温升对重载铁路车轮磨耗的影响[J].机械工程学报,2017,53(2):92-98.
CHEN Shuai, WU Lei, ZHANG Heji, et al.Effect of Tread Brake Temperature Rise on Heavy-duty Railway Wheel Wear[J].Journal of Mechanical Engineering,2017,53(2):92-98.
[4]MANDEEP S W,TORE V R, LUNDN F B, et al Temperatures and Wear at Railway Tread Braking: Field Experiments and Simulations[J]. Wear,2019,440/441:203086.
[5]KATSUYOSHI I K, HANDA R, LUNDN T V. Wheel Tread Profile Evolution for Combined Block Braking and Wheel-rail Contact: Results from Dynamometer Experiments[J]. Wear,2016,366/367:310-315.
[6]蓝春红, 吴萌岭, 王勇, 等.重载货车踏面制动时车轮温度场与应力场研究[J]. 铁道车辆, 2011, 49(7): 1-5.
LAN Chunhong, WU Mengling, WANG Yong, et al. Research on the Temperature and Stress Fields of the Wheels of the Heavy-duty Truck during Tread Braking[J]. Railway Vehicles, 2011, 49 (7): 1-5.
[7]MICKOSKI H,MICKOSKI I,ZDRAVESKI F. Investigation of Self-excited Vibrations in Tread Brake Unit for Railway Vehicles[J]. Journal of Vibra Engineering, 2016,18:3881-3890.
[8]向阳, 傅茂海, 马鹏, 等. 30 t轴质量货车车轮热应力分析[J]. 铁道机车车辆, 2010, 30(6): 29-32.
XIANG Yang, FU Maohai, MA Peng, et al. Thermal Stress Analysis of 30 t Axle Truck Wheels[J]. Railway Rolling Stock, 2010, 30(6): 29-32.
[9]张琪, 王玉光, 周小江, 等. 不同地铁车轮结构几何参数下踏面制动热负荷分析[J]. 计算机辅助工程, 2016, 25(2): 19-24.
ZHANG Qi, WANG Yuguang, ZHOU Xiaojiang, et al. Thermal Load Analysis of Tread Brakes with Different Geometric Parameters of Subway Wheel Structure[J]. Computer Aided Engineering, 2016, 25 (2): 19-24.
[10]李龙. 温度对轮轨摩擦副摩擦因数和磨损的影响研究[D]. 兰州:兰州交通大学,2015:44-52.
LI Long. The Effect of Temperature on the Friction Coefficient and Wear of the Wheel-rail Friction Pair[D]. Lanzhou:Lanzhou Jiaotong University, 2015:44-52.

[11]王雪萍. 高速铁路车轮踏面磨耗预测及试验研究[D]. 北京:北京建筑大学,2019:58-64.
WANG Xueping. Prediction and Experimental Research on Wheel Tread Wear of High-speed Railway[D]. Beijing:Beijing University of Architecture, 2019:58-64.
[12]赵翔. 高速列车粉末冶金制动闸片的制备与摩擦磨损性能研究[D]. 北京:北京科技大学,2016: 119.
ZHAO Xiang. Preparation and Friction and Wear Properties of Powder Metallurgy Brake Pads for High-speed Trains[D]. Beijing:University of Science and Technology Beijing, 2016: 119.
[13]杨刚,李建,方涛, 等.U75VG钢轨钢与温度相关的循环塑性变形行为[J]. 机械工程材料, 2019, 43(5): 71-74.
YANG Gang, LI Jian, FANG Tao, et al. Temperature-dependent Cyclic Plastic Deformation Behavior of U75VG Rail Steel[J]. Materials for Mechanical Engineering, 2019, 43(5): 71-74.
Outlines

/

〈 〉