Parameter Solution of Instantaneous Milling Force Model of Variable Cross-section Scroll Plates Based on Improved PSO Algorithm

  • LIU Tao ,
  • ZHANG Lifang
Expand
  • School of Mechanical and Electrical Engineering,Lanzhou University of Technology,Lanzhou,730050

Received date: 2019-10-08

  Online published: 2020-12-31

Abstract

In order to solve the multivariate nonlinear problems in the prediction of instantaneous milling forces in variable cross-section scroll plate machining processes, a mathematical model for instantaneous milling force considering the tool runout was established based on the actual milling processes, and an improved PSO algorithm was proposed to solve the mathematical model to improve the accuracy of the instantaneous milling force prediction model. The method was verified by the instantaneous milling force experiment results under four groups of milling parameters. The results show that the instantaneous milling force curves obtained by the proposed method have a high degree of agreement with the experimentally measured ones in terms of the shape and peak value, and the peak errors of the four groups of tests is within 15%. The proposed PSO algorithm could effectively improve the convergence rate of instantaneous milling force identification of variable cross-section scroll plate machining. The model parameters can be identified with higher precision and fewer trials, which reduces the test costs compared with the average milling force solving method.

Cite this article

LIU Tao , ZHANG Lifang . Parameter Solution of Instantaneous Milling Force Model of Variable Cross-section Scroll Plates Based on Improved PSO Algorithm[J]. China Mechanical Engineering, 2020 , 31(24) : 2943 -2949 . DOI: 10.3969/j.issn.1004-132X.2020.24.007

References

[1]WANG Jianji, LIU Tao. Leakage Model of Axial Clearance and Test of Scroll Compressors[J]. Journal of Shanghai Jiao Tong University (Science),2020,25(4): 531-537.
[2]李曦, 袁军堂, 汪振华, 等. 基于Rayleigh-Ritz法的钛合金薄壁件非均匀余量加工变形控制研究[J].中国机械工程, 2020, 31(11): 1378-1385.
LI Xi, YUAN Juntang, WANG Zhenghua, et al. Study on Deformation Control of Thin-walled Titanium Alloy Parts in Non-uniform Allowance Machining Based on Rayleigh-Ritz Method[J].China Mechanical Engineering, 2020, 31(11): 1378-1385.
[3]KALIDASS S, RAVIKUMAR M T. Cutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools[J]. International Journal of Engineering, Transactions A: Basics, 2015, 28(7): 1104-1111.
[4]涂俊翔, 王沼阳, 胡建玥. 基于响应曲面法的东非黑黄檀铣削力预测模型研究[J]. 现代制造工程, 2017(5):7-12.
TU Junxiang, WANG Zhaoyang, HU Jianyue. Research on Forecasting Model of African Blackwood Milling Force Based on Response Surface Method [J]. Modern Manufacturing Engineering, 2017(5):7-12.
[5]谢英星. 基于响应曲面法的模具钢高速铣削切削力模型研究[J]. 组合机床与自动化加工技术, 2015(6): 24-27.
XIE Yingxing. Prediction Cutting Force Model of High-speed Milling Hardened Steel by Response Surface Methodology[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2015(6): 24-27.
[6]吴石, 杨琳, 刘献礼, 等. 覆盖件模具曲面曲率特征对球头刀铣削力的影响[J]. 机械工程学报, 2017, 53(13): 188-198.
WU Shi, YANG Lin, LIU Xianli, et al. Influence of Curvature Characteristics of Sculptured Surface on Milling Force in Ball-end Milling of Panel Moulds[J]. Journal of Mechanical Engineering, 2017, 53(13): 188-198.
[7]黎柏春, 王振宇, 张斌, 等. 球头铣刀切削刃存在差异的切削力系数辨识[J]. 东北大学学报(自然科学版), 2019, 40(9):1316-1322.
LI Baichun, WANG Zhenyu, ZHANG Bin, et al. Identification of Cutting Force Coefficients in Different Cutting Edges of Ball-end Milling Cutter[J]. Journal of Northeastern University (Natural Science), 2019, 40(9): 1316-1322.
[8]赵俊花, 李丽, 李玲玲,等. 面向高效节能的复杂曲面分区数控铣削加工优化方法[J]. 中国机械工程, 2019, 30(1):64-71.
ZHAO Junhua, LI Li, LI Lingling, et al. Optimization Method of Partitioned Complex Surface CNC Milling for Minimum Energy Consumption and High Efficiency[J]. China Mechanical Engineering, 2019, 30(1):64-71.
[9]WANG Liping, SI Hao, GU Liheng. Prediction of Cutting Forces in Flank Milling of Parts with Non-developable Ruled Surfaces[J]. Chinese Journal of Aeronautics, 2019, 32(7): 1788-1796.
[10]AHMADI K, ISMAIL F. Machining Chatter in Flank Milling[J]. International Journal of Machine Tools & Manufacture, 2010, 50(1): 75-85.
[11]ZHANG Nan, SHI Yaoyao. A 3-D Instantaneous Cutting Force Prediction Model of Indexable Disc Milling Cutter for Manufacturing Blisk-tunnels Considering Run-out[J]. The International Journal of Advanced Manufacturing Technology, 2019, 103(9/12):4029-4039.
[12]YANG Yun, ZHANG Weihong, WAN Min. Effect of Cutter Runout on Process Geometry and Forces in Peripheral Milling of Curved Surfaces with Variable Curvature[J]. International Journal of Machine Tools & Manufacture, 2011, 51(5): 420-427.
[13]WAN Min, ZHANG Weihong. Systematic Study on Cutting Force Modelling Methods for Peripheral Milling[J]. International Journal of Machine Tools & Manufacture, 2009, 49(5): 424-432.
[14]WAN Min, ZHANG Weihong, QIN Guohua, et al. Efficient Calibration of Instantaneous Cutting Force Coefficients and Runout Parameters for General End Mills[J]. International Journal of Machine Tools & Manufacture, 2007, 47(11): 1767-1776.
[15]王小川. MATLAB神经网络43个案例分析[M]. 北京: 北京航空航天大学出版社, 2013: 306-312.
WANG Xiaochuan.Analysis of 43 Cases of MATLAB Neural Network [M]. Beijing: Beihang University Press, 2013: 306-312.
[16]杨英杰. 粒子群算法及其应用研究[M].北京: 北京理工大学出版社, 2017: 9-30.
YANG Yingjie. Particle Swarm Optimization and ITS Application[M].Beijing:Beijing Institute of Technology Press, 2017: 9-30.
[17]AZEEM A, FENG H Y, WANG Lihui. Simplified and Efficient Calibration of a Mechanistic Cutting Force Model for Ball-end Milling[J]. International Journal of Machine Tools & Manufacture, 2004, 44(2): 291-298.
[18]王保升. 瞬时铣削力模型参数辨识及其实验研究[D]. 镇江: 江苏大学, 2011: 62-66.
WANG Baosheng. Parameters Identification of Instantaneous Milling Force Model and Its Experimental Investigation[D].Zhenjiang:Jiangsu University, 2011: 62-66.
Outlines

/

〈 〉