Status and Development Trend of Domestic Heavy-duty CNC Machine Tools

  • GUI Lin ,
  • LI Sheng
Expand
  • Wuhan Heavy Duty Machine Tool Group Corporation, Wuhan, 430205

Received date: 2019-08-12

  Online published: 2020-12-16

Abstract

Heavy-duty CNC machine tools were the machine tools for overweight and oversized components in energy, transportation industries and so on, which restricted the development of these industries. Combining the challenges of the design and manufacture of heavy-duty CNC machine tools in China, the technological breakthroughs and innovations of heavy-duty CNC machine tools were introduced with the example of a CNC seven-axis five-link propeller machining heavy-duty turning and milling machine tool CKX5680. The on-service domestic heavy-duty CNC machine tools and the encountered problems in the machining prosesses were proposed.Future development trends of heavy-duty CNC machine tools were prospected.

Cite this article

GUI Lin , LI Sheng . Status and Development Trend of Domestic Heavy-duty CNC Machine Tools[J]. China Mechanical Engineering, 2020 , 31(23) : 2780 -2787,2797 . DOI: 10.3969/j.issn.1004-132X.2020.23.002

References

[1]李斌,孙忠林,彭芳瑜,等.叶片零件在线检测测点规划问题研究[J]. 中国机械工程, 2008,19(5):540-546.
LI Bin, SUN Zhonglin, PENG Fangyu, et al. Research on On-line Probing Measure-point Layout for Blade Parts[J].China Mechanical Engineering, 2008,19(5):540-546.
[2]彭芳瑜,苏永春,邹孝明,等.大型螺旋桨五轴加工中基于方向包围盒层次树的全局干涉碰撞检测[J]. 中国机械工程, 2007,18(3):304-307.
PENG Fangyu, SU Yongchun, ZOU Xiaoming, et al. Global Interference and Collision Detection Based on Hierarchical OBB Tree in the 5-axis Machining of Impeller[J]. China Mechanical Engineering, 2007,18(3):304-307.
[3]曾艳,李斌,彭芳瑜.面向数控加工的大型螺旋桨桨叶的余量估算问题研究[J]. 中国机械工程, 2006,17(6):566-569.
ZENG Yan, LI Bin, PENG Fangyu. Research on the Estimation of the Propeller Allowance in NC Machining[J]. China Mechanical Engineering, 2006,17(6):566-569.
[4]陈满意,李斌,段正澄.叶片零件毛坯余量分布优化问题研究[J]. 机械科学与技术,2006,25(2):246-248.
CHEN Manyi, LI Bin, DUAN Zhengcheng. Research on Optimization of Blank Allowance Distribution for Blade Parts[J]. Mechanical Science and Technology, 2006, 25(2):246-248.
[5]李斌,李沨,陈福盈,等.改进Kriging方法在螺旋桨测量中的应用[J]. 中国机械工程, 2013,24(13):1709-1714.
LI Bin, LI Feng, CHEN Fuying, et al. Improvement for Kriging Method in Applications of Blade Measurement[J]. China Mechanical Engineering, 2013,24(13):1709-1714.
[6]吴晓,龚时华,李斌,等. 基于 OpenGL七轴五联动车铣复合机床仿真系统研究[J]. 机械与电子,2005(5):68-70.
WU Xiao, GONG Shihua, LI Bin, et al. Research of Simulation System of Seven-five Axis Lathe-milling Machine Based on OpenGL[J]. Machinery and Electronics,2005(5):68-70.
[7]张志燕,李斌,朱国力,等.基于PC+NC的开放式数控系统平台的研究与应用[J]. 机械与电子,2005(5):6-8.
ZHANG Zhiyan, LI Bin, ZHU Guoli, et al. Research and Applications of Open CNC System Platform Based on PC+NC[J]. Machinery and Electronics,2005(5):6-8.
[8]陈满意,李斌,段正澄.基于奇异值分解的曲面最佳适配的不确定度分析[J]. 华中科技大学学报(自然科学版),2005,33(9):56-58.
CHEN Manyi, LI Bin, DUAN Zhengcheng. Uncertainty Analysis of Best Fit Evaluation for Freeform Surface Based on SVD[J]. Journal of Huazhong University of Science & Technology(Nature Science Edition), 2005,33(9):56-58.
[9]伍抗逆,李斌,陈吉红.面向开放式数控系统平台的 NC 代码解释器开发[J]. 中国机械工程, 2006,17(2):168-171.
WU Kangni, LI Bin, CHEN Jihong. Implementation of NC Code Interpreter of Open Architecture NC System Platform[J]. China Mechanical Engineering, 2006,17(2):168-171.
[10]朱国力,龚时华,李斌.七轴五联动螺旋桨加工机床控制系统关键技术[J]. 华中科技大学学报(自然科学版),2007,35(3):77-79.
ZHU Guoli, GONG Shihua, LI Bin. Study on Key Technology of Control System for Propeller Processing Machines[J]. Journal of Huazhong University of Science & Technology(Nature Science Edition),2007,35(3):77-79.
[11]何发诚,桂林. DL250 数控重型卧式镗车床的设计[J]. 制造技术与机床,2011(8):59-61.
HE Facheng, GUI Lin. Design of DL250 CNC Heavy-duty Horizontal Boring Lathe[J]. Manufacturing Technology & Machine Tool, 2011(8):59-61.
[12]何发诚,桂林.变频恒流静压轴承的研制[J]. 制造技术与机床,2011(9):140-141. 
HE Facheng, GUI Lin. Development of Frequency Conversion Constant Flow Hydrostatic Bearing Manufacturing[J]. Technology & Machine Tool,2011(9):140-141.
[13]中国机械工程学会.中国机械工程技术路线图[M]. 2版. 北京:中国科学技术出版社,2016.
Chinese Mechanical Engineering Society.Technology Roadmaps of Chinese Mechanical Engineering[M]. 2nd ed. Beijing: China Science and Technology Press, 2016.
[14]李杰,邱伯华,刘宗长,等. CPS:新一代工业智能[M]. 上海:上海交通大学出版社,2017.
LEE Jay, QIU Bohua, LIU Zongchang, et al. Cyber-Physical System:the New Generation of Industrial Intelligence[M]. Shanghai: Shanghai Jiao Tong University Press, 2017.
Outlines

/

〈 〉