Intelligent Technology of Plastic Injection Molding and Its Applications

  • LI Yang ,
  • GUO Fei ,
  • LI Maoyuan ,
  • ZHANG Yun ,
  • LI Dequn
Expand
  • State Key Lab of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan,430074

Received date: 2020-06-29

  Online published: 2020-11-30

Abstract

The current industrial needs and technical bottlenecks of plastic injection molding, and the clarified future development trend were summarized. According to the characteristics of plastic injection molding, a scientific framework of the “intelligent manufacturing system of injection molding” was proposed, and the intelligent injection molding solutions based on sensor technology, industrial Ethernet and internet were established. Focusing on four levels, i.e. intelligent design, intelligent optimization, intelligent monitoring and manufacturing data platform, the knowledge organization and reuse, independent decision-making and optimization, process sensing and detection, cloud service and other technologies in injection molding were summarized, and the important development directions for the deep integration of plastic injection molding and new generation artificial intelligence technologies were pointed out.

Cite this article

LI Yang , GUO Fei , LI Maoyuan , ZHANG Yun , LI Dequn . Intelligent Technology of Plastic Injection Molding and Its Applications[J]. China Mechanical Engineering, 2020 , 31(22) : 2734 -2744 . DOI: 10.3969/j.issn.1004-132X.2020.22.011

References

[1]张洁. 制造业大数据[M].上海:上海科学技术出版社, 2016.
ZHANG Jie. Big Data in Manufacturing[M]. Shanghai: Shanghai Science and Technology Press, 2016.
[2]KOZJEK D, KRALJ D, BUTALA P, et al. A Data-driven Holistic Approach to Fault Prognostics in a Cyclic Manufacturing Process[J]. Procedia CIRP, 2017, 63: 664-669.
[3]KRUTH J P, WILLEMS R. Intelligent Support System for the Design of Injection Moulds[J]. Journal of Engineering Design, 1994, 5(4): 339-351.
[4]RAVIWONGSE R, ALLADA V. Artificial Neural Network Based Model for Computation of Injection Mould Complexity[J]. International Journal of Advanced Manufacturing Technology, 1997, 13(8): 577-586.
[5]BRITTON G A, TOR S B, LAM Y C, et al. Mo-delling Functional Design Information for Injection Mould Design[J]. International Journal of Production Research, 2001, 39(12): 2501-2515.
[6]ONG S K, PROMBANPONG S, LEE K S. An Object-oriented Approach to Computer-aided Design of a Plastic Injection Mould[J]. Journal of Intelligent Manufacturing, 1995, 6(1): 1-10.
[7]IRANI R K, KIM B H, DIXON J R. Towards Automated Design of the Feed System of Injection Molds by Integrating CAE, Iterative Redesign and Features[J].Journal of Engineering for Industry,117(1):1-8.
[8]NEE A Y C, FU M W, FUH J Y H, et al. Determination of Optimal Parting Directions in Plastic Injection Mold Design[J]. CIRP Annals, 1997, 46(1): 429-432.
[9]CHEN L L, CHOU S Y, WOO T C. Partial Visibility for Selecting a Parting Direction in Mold and Die Design[J]. Journal of Manufacturing Systems, 1995, 14(5): 319.
[10]PARK S J, KWON T H. Thermal and Design Sensitivity Analyses for Cooling System of Injection Mold, Part 1: Thermal Analysis[J]. The ASME Journal of Manufacturing Science and Engineering 1998,120(2):287-295.
[11]王小军. 基于本体的注塑模具设计案例检索方法研究[D]. 广州:广东工业大学, 2015.
WANG Xiaojun. Research on Injection Mold Design with Case Retrieval Base on Ontology[D]. Guangzhou: Guangdong University of Technology, 2015.
[12]于同敏, 张享倩. 基于 CBR 的注塑模具侧向抽芯机构设计研究[J]. 塑料科技, 2012(5): 81-85.
YU Tongmin, ZHANG Xiangqian. Study on the Design of  Injection Mould Side Core-pulling Mechanism Based on CBR [J]. Plastic Science and Technology, 2012(5):81-85.
[13]WANG V W, HIEBER C A, WANG K K. Dynamic Simulation and Graphics for the Injection Molding of Three-dimensional Thin Parts[J]. Journal of Polymer Engineering, 1986, 7(1): 21-45.
[14]CHIANG H H, HIEBER C A, WANG K K. A Unified Simulation of the Filling and Postfilling Stages in Injection Molding. Part I: Formulation[J]. Polymer Engineering & Science, 1991, 31(2): 116-124.
[15]HIMASEKHAR K, LOTTEY J, WANG K K. CAE of Mold Cooling in Injection Molding Using a Three-dimensional Numerical Simulation[J]. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 1992, 114(2): 213-221.
[16]BATOZ J L, LARDEUR P. A Discrete Shear Triangular Nine D.O.F. Element for the Analysis of Thick to Very Thin Plates[J]. International Journal for Numerical Methods in Engineering, 1989, 28(3): 533-560.
[17]ISAYEV A I. Orientation, Residual Stresses, and Volumetric Effects in Injection Molding[M]∥Injection and Compression Molding Fundamentals. Routledge, 2018: 227-328.
[18]PICHELIN E, COUPEZ T. A Taylor Discontinuous Galerkin Method for the Thermal Solution in 3D Mold Filling[J]. Computer Methods in Applied Mechanics and Engineering, 1999, 178(1/2): 153-169.
[19]LIU X, GUO F, ZHANG Y, et al. An Efficient Coupled Pressure-velocity Solver for Three-dimensional Injection Molding Simulation Using Schur Complement Preconditioned FGMRES[J]. Engineering Computations, 2019,36(4):1101-1120.
[20]MLLER-PLATHE F. Coarse-graining in Polymer Simulation: from the Atomistic to the Mesoscopic Scale and Back[J]. Chem. Phys. Chem., 2002, 3(9): 754-769.
[21]de GENNES P G. Reptation of a Polymer Chain in the Presence of Fixed Obstacles[J]. The Journal of Chemical Physics, 1971, 55(2): 572-579.
[22]DOI M. Soft Matter Physics[M]. New York :Oxford University Press, 2013.
[23]KWONG C K, SMITH G F, LAU W S. Application of Case Based Reasoning in Injection Moulding[J]. Journal of Materials Processing Technology, 1997, 63(1/3): 463-467.
[24]MOK S L, KWONG C K, LAU W S. An Intelligent Hybrid System for Initial Process Parameter Setting of Injection Moulding[J]. International Journal of Production Research, 2000, 38(17): 4565-4576.
[25]SHELESH-NEZHAD K, SIORES E. An Intelligent System for Plastic Injection Molding Process Design[J]. Journal of Materials Processing Technology, 1997, 63(1/3): 458-462.
[26]HE W, ZHANG Y F, LEE K S, et al. Automated Process Parameter Resetting for Injection Moulding: a Fuzzy-neuro Approach[J]. Journal of Intelligent Manufacturing, 1998, 9(1): 17-27.
[27]GAO Y, TURNG L S, WANG X. Adaptive Geometry and Process Optimization for Injection Molding Using the Kriging Surrogate Model Trained by Numerical Simulation[J]. Advances in Polymer Technology: Journal of the Polymer Processing Institute, 2008, 27(1): 1-16.
[28]ZHOU H, ZHAO P, FENG W. An Integrated Intelligent System for Injection Molding Process Determination[J]. Advances in Polymer Technology: Journal of the Polymer Processing Institute, 2007, 26(3): 191-205.
[29]LI D, ZHOU H, ZHAO P, et al. A Real-time Process Optimization System for Injection Molding[J]. Polymer Engineering & Science, 2009, 49(10): 2031-2040.
[30]GUO F, ZHOU X, LIU J, et al. A Reinforcement Learning Decision Model for Online Process Parameters Optimization from Offline Data in Injection Molding[J]. Applied Soft Computing, 2019, 85: 105828.
[31]CHEN W C, NGUYEN M H, CHIU W H, et al. Optimization of the Plastic Injection Molding Process Using the Taguchi Method, RSM, and Hybrid GA-PSO[J]. The International Journal of Advanced Manufacturing Technology, 2016, 83(9/12): 1873-1886.
[32]ZHAO J, CHENG G. An Innovative Surrogate-based Searching Method for Reducing Warpage and Cycle Time in Injection Molding[J]. Advances in Polymer Technology, 2016, 35(3): 288-297.
[33]KURTARAN H, ERZURUMLU T. Efficient Warpage Optimization of Thin Shell Plastic Parts Using Response Surface Methodology and Genetic Algorithm[J]. The International Journal of Advanced Manufacturing Technology, 2006, 27(5/6): 468-472.
[34]KITAYAMA S, YOKOYAMA M, TAKANO M, et al. Multi-objective Optimization of Variable Packing Pressure Profile and Process Parameters in Plastic Injection Molding for Minimizing Warpage and Cycle Time[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(9/12): 3991-3999.
[35]张玲利. 多变量统计过程控制及其在注塑成型过程中的应用研究[D]. 北京: 北京化工大学, 2007.
ZHANG Lingli. MSPC and Its Application in Injection Molding[D]. Beijing: Beijing University of Chemical Technology Press, 2007.
[36]HE Bobing. Characterizing of Polymer Morphologies & in-situ Monitoring of Injection Molding Process Using Ultrasonic Techniques [D]. Chengdu: Sichuan University Press, 2007.
[37]EDWARDS R, THOMAS C. On-line Measurement of Polymer Orientation Using Ultrasonic Technology[J]. Polymer Engineering & Science, 2001, 41(9): 1644-1653.
[38]叶庆莹, 张逸, 沈关成,等. 碳纤维增强塑料的纤维取向介电测量方法[J]. 塑料工业, 2019(5):103-106.
YE Qingying, ZHANG Yi, SHEN Guancheng, et al. Dielectric Method for Fiber Orientation Measurement of Carbon Fiber Reinforced Plastic[J]. China Plastics Industry, 2019(5):103-106.
[39]RIBEIRO B. Support Vector Machines for Quality Monitoring in a Plastic Injection Molding Process[J]. IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews), 2005, 35(3): 401-410.
[40]周昊飞, 刘玉敏. 基于深度置信网络的大数据制造过程实时智能监控[J]. 中国机械工程, 2018, 29(10): 1201-1207.
ZHOU Haofei, LIU Yumin. Real-time Intelligent Monitoring for Manufacturing Processes with Big Data Based on Deep Belief Networks[J]. China Mechanical Engineering, 2018, 29(10): 1201-1207.
[41]MACGREGOR J, CINAR A. Monitoring, Fault Diagnosis, Fault-tolerant Control and Optimization: Data Driven Methods[J]. Computers & Chemical Engineering, 2012, 47: 111-120.
[42]SPERANZA V, VIETRI U, PANTANI R. Monitoring of Injection Molding of Thermoplastics: Average Solidification Pressure as a Key Parameter for Quality Control[J]. Macromolecular Research, 2011, 19(6): 542.
[43]LU H, PLATANIOTIS K N, VENETSANOPOULOS A N. MPCA: Multilinear Principal Component Analysis of Tensor Objects[J]. IEEE Transactions on Neural Networks, 2008, 19(1): 18-39.
[44]ZHANG S, DUBAY R, CHAREST M. A Principal Component Analysis Model-based Predictive Controller for Controlling Part Warpage in Plastic Injection Molding[J]. Expert Systems with Applications, 2015, 42(6): 2919-2927.
[45]GE Z, YANG C, SONG Z. Improved Kernel PCA-based Monitoring Approach for Nonlinear Processes[J]. Chemical Engineering Science, 2009, 64(9): 2245-2255.
[46]HOFFMANN H. Kernel PCA for Novelty Detection[J]. Pattern Recognition, 2007, 40(3): 863-874.
[47]CHEN W C, TAI P H, WANG M W et al. A Neural Network-based Approach for Dynamic Quality Prediction in a Plastic Injection Molding Process[J]. Expert Systems with Applications, 2008, 35(3): 843-849.
[48]YANG Y, GAO F. Adaptive Control of the Filling Velocity of Thermoplastics Injection Molding[J]. Control Engineering Practice, 2000, 8(11): 1285-1296.
[49]DUBAY R, HU B, HERNANDEZ J M, et al. Controlling Process Parameters during Plastication in Plastic Injection Molding Using Model Predictive Control[J]. Advances in Polymer Technology, 2014, 33(S1):21449.
[50]RUAN Y, ZHANG Y, MAO T ,et al. Trajectory Optimization and Positioning Control for Batch Process Using Learning Control[J]. Control Engineering Practice, 2019, 85: 1-10.
[51]HOPMANN C, ABEL D, HEINISCH J ,et al. Self-optimizing Injection Molding Based on Iterative Learning Cavity Pressure Control[J]. Production Engineering, 2017, 11(2): 97-106.
[52]ZHANG Y, XI D, YANG H, et al. Cloud Manufacturing Based Service Encapsulation and Optimal Configuration Method for Injection Molding Machine[J]. Journal of Intelligent Manufacturing, 2019, 30(7): 2681-2699.
[53]LI Z, LIU X, WANG W M, et al. CKshare: Secured Cloud-based Knowledge-sharing Blockchain for Injection Mold Redesign[J]. Enterprise Information Systems, 2019, 13(1): 1-33.
Outlines

/

〈 〉