Data-driven Energy Consumption Prediction Method of  CNC Turning Based on Meta-action

  • LI Congbo ,
  • YIN Yuxian ,
  • XIAO Qinge ,
  • LONG Yun ,
  • ZHAO Xikun
Expand
  • State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044

Received date: 2019-11-22

  Online published: 2020-11-20

Abstract

Aiming at the problems of low accuracy and poor generalization of conventional energy consumption prediction model, a data-driven energy consumption prediction method of CNC turning was proposed based on meta-action. The effects of meta-action on energy consumption were explored under each period of turning via analyzing the energy consumption characteristics of CND turning. A data collection method of meta-action and energy consumption was proposed and the states of turning were judged by the meta-action data. Then, based on the data collected in the processes of CNC machining, energy consumption prediction model was built using Gaussian process regression, which was used to predict dynamic energy consumption of CNC turning. Finally, the superiority of the proposed model was verified by comparing three fitting methods, taking the machining of an axial workpiece as an example, a case study was conducted to validate the practicality of the proposed energy consumption prediction method through comparison with theoretical model.

Cite this article

LI Congbo , YIN Yuxian , XIAO Qinge , LONG Yun , ZHAO Xikun .

Data-driven Energy Consumption Prediction Method of  CNC Turning Based on Meta-action
[J]. China Mechanical Engineering, 2020 , 31(21) : 2601 -2611 . DOI: 10.3969/j.issn.1004-132X.2020.21.011

References

[1]Energy Information Administration(EIA). Annual Energy Outlook 2019 with Projections to 2050[R/OL]. Washington, DC: U.S. Department of Energy, 2019[2019-07-01]. https://www.eia.gov/outlooks/aeo/.
[2]ZHOU Lirong, LI Jianfeng, LI Fangyi, et al. Energy Consumption Model and Energy Efficiency of Machine Tools: a Comprehensive Literature Review[J]. Journal of Cleaner Production, 2016, 112: 3721-3734.
[3]鄢威, 张华, 江志刚, 等. 面向节能高效需求的数控加工系统多目标优化模型[J]. 中国机械工程, 2018, 29(21): 55-64.
YAN Wei, ZHNAG Hua, JIANG Zhigang, et al. Multi-objective Optimization Model Faced to Demands of Energy and High Efficiency for CNC Machining Systems[J]. China Mechanical Engineering, 2018, 29(21): 55-64.
[4]JIA Shun, TANG Renzhong, LYU Jingxiang. Therblig-based Energy Demand Modeling Methodology of Machining Process to Support Intelligent Manufacturing[J]. Journal of Intelligent Manufacturing, 2014, 25(5): 913-931.
[5]李聪波, 朱岩涛, 李丽, 等. 面向能量效率的数控铣削加工参数多目标优化模型[J]. 机械工程学报, 2016, 52(21): 120-129.
LI Congbo, ZHU Yantao, LI Li, et al. Multi-objective CNC Milling Parameters Optimization Model for Energy Efficiency[J]. Journal of Mechanical Engineering, 2016, 52(21): 120-129.
[6]KANT G, SANGWAN K S. Prediction and Optimization of Machining Parameters for Minimizing Power Consumption and Surface Roughness in Machining[J]. Journal of Cleaner Production, 2014, 83: 151-164.
[7]LI Congbo, XIAO Qinge, TANG Ying, et al. A Method Integrating Taguchi, RSM and MOPSO to CNC Machining Parameters Optimization for Energy Saving[J]. Journal of Cleaner Production, 2016, 135: 263-275.
[8]PARK H S, NGUYEN T T, DANG X P. Multi-objective Optimization of Turning Process of Hardened Material for Energy Efficiency[J]. International Journal of Precision Engineering and Manufacturing, 2016, 17(12): 1623-1631.
[9]XIAO Qinge, LI Congbo, TANG Ying, et al. A Knowledge-driven Method of Adaptively Optimizing Process Parameters for Energy Efficient Turning[J]. Energy, 2019, 166: 142-156.
[10]张洁, 汪俊亮, 吕佑龙, 等. 大数据驱动的智能制造[J]. 中国机械工程, 2019, 30(2): 127-133.
ZHANG Jie, WANG Junliang, LYU, Youlong, et al. Big Data Driven Intelligent Manufacturing[J]. China Mechanical Engineering, 2019, 30(2): 127-133.
[11]XIAO Qinge, LI Congbo, TANG Ying, et al. Deep Learning based Modeling for Cutting Energy Consumed in CNC Turning Process[C]//2018 IEEE International Conference on Systems, Man, and Cybernetics. Miyazaki, 2018: 1398-1403.
[12]吕景祥, 唐任仲, 郑军. 数据驱动的车削和钻削加工能耗预测方法研究[J/OL]. 计算机集成制造系统 [2019-06-11]. http://kns.cnki.net/kcms/detail/ 11.5946.tp. 20190404.1103.002.html.
LYU Jingxiang, TANG Renzhong, ZHENG Jun. Research on Data-driven Methodology for Energy Consumption Prediction of Turning and Drilling Processes[J/OL]. Computer Integrated Manufacturing Systems[2019-06-11].
http://kns.cnki.net/kcms/detail/ 11.5946.tp. 20190404.1103.002.html.
[13]BHINGE R, PARK J, LAW K H, et al. Toward a Generalized Energy Prediction Model for Machine Tools[J]. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2017, 139(4): 1-12.
[14]CHEN Xingzheng, LI Congbo, TANG Yin, et al. An Internet of Things Based Energy Efficiency Monitoring and Management System for Machining Workshop [J]. Journal of Cleaner Production, 2018, 199: 957-968.
[15]LYU Jingxiang, TANG Renzhong, JIA Shun. Therblig-based Energy Supply Modeling of Computer Numerical Control Machine Tools[J]. Journal of Cleaner Production, 2014, 65: 168-177.
[16]GUTOWSKI T, DAHMUS J, THIRIEZ A. Electrical Energy Requirements for Manufacturing Processes[C]//13th CIRP Iinternational Conference on Life Cycle Engineering. Belgium, 2006, 31(1): 623-638.
[17]刘飞, 徐宗俊, 但斌. 机械加工系统能量特性及其应用[M]. 北京:机械工业出版社,1995.
LIU Fei, XU Zongjun, DAN Bin. Energy Characteristics and Application of Machining System[M]. Beijing: China Machine Press, 1995.
[18]SEEGER M. Gaussian Processes for Machine Learning[J]. International Journal of Neural Systems, 2004, 16(2): 69-106.
Outlines

/

〈 〉