Shearing was a key part of the spent fuel reprocessing processes. Due to the strong irradiation constraints, there were few studies on the shearing processes. The parameters of shearing processes needed to be optimized by a large number of experiments. But the high cost, the long experimental cycle and complex shear mechanism made it unaccessible. The stainless steel tubes, the main support structures of spent fuel assemblies, were introduced as the research object and based on Johnson-Cook model the finite element numerical simulation method was used to analyze the shearing processes. The shear test was designed to verify the correctness of the previous model, and the effects of process parameters such as shear clearance, tool angle and tool edge width on shearing processes. The results show that the shear test and the simulation of model have good fitting performance, which proves the correctness of the model. The maximum shear forces and shear forces during fracturing are positively related with the augment of shear clearance and edge width, and the decreases of tool angle. The shear clearance has a great influence on the fracture morphology of the compression sections, and the tool angle and the edge width have a great influence on the opening width of the separation sections.
[1] 李宏业,张琦.我国核电站乏燃料管理立法思考[J]. 中国能源,2018,40(3):44-47. LI Hongye, ZHANG Qi. Thoughts on the Legislation of Spent Fuel Management in Nuclear Power Plants in China[J]. Energy of China, 2018, 40(3):44-47.
[2] 洪哲,赵善桂,张春龙,等.我国乏燃料离堆贮存需求分析[J]. 核科学与工程,2016,36(3):411-418. HONG Zhe, ZHAO Shangui, ZHANG Chunlong, et al. Analysis of the Demand for the Away-from-reactor Storage of Spent Fuel in China[J]. Nuclear Science and Engineering, 2016, 36(3):411-418.
[3] 托特迈尔·A,巴什基特塞夫·S·M,莫罗佐夫·A·G.核燃料组件:中国, CN106716546B[P]. 2019-04-02. TOTEMEIER A, BASHKIRTSEV S M, MOROZOV A G. Nuclear Fuel Assembly:China, CN106716546B[P]. 2019-04-02.
[4] 张迅,王湘江. 乏燃料模拟组件剪切断裂过程分析[J]. 南华大学学报(自然科学版),2015,29(4):27-32. ZHANG Xun, WANG Xiangjiang. Shear Fracture Analysis of Simulation Spent Fuel Component[J]. Journal of University of South China (Science and Technology), 2015, 29(4):27-32.
[5] 秦泗吉.板材剪切与冲裁加工过程有限元模拟及实验研究[D]. 秦皇岛:燕山大学, 2002. QIN Siji. Finite Element Method Simulation and Experimental Research on Sheet Metal Shearing and Blanking Process[D]. Qinhuangdao:Yanshan University, 2002.
[6] 周明,李永好,胡启,等.冲裁质量对TRIP780边部成形性能的影响[J]. 塑性工程学报,2018,25(6):7-13. ZHOU Ming, LI Yonghao, HU Qi, et al. Effect of Shearing Quality on Edge Formability of TRIP780[J]. Journal of Plasticity Engineering, 2018, 25(6):7-13.
[7] 杜钟斌,李雪伍,于正洋,等.304不锈钢棒气动式可控旋弯下料工艺及试验[J]. 机械工程学报,2018,54(22):47-54. DU Zhongbin, LI Xuewu, YU Zhengyang, et al. Process and Experimental Research of Controllable Pneumatic Rotary Bending Cropping of 304 Stainless Steel Bar[J]. Journal of Mechanical Engineering, 2018, 54(22):47-54.
[8] 夏琴香,周立奎,肖刚锋,等. 金属剪切旋压成形时的韧性断裂准则[J]. 机械工程学报,2018, 54(14):66-73. XIA Qinxiang, ZHOU Likui, XIAO Gangfeng, et al. Ductile Fracture Criterion for Metal Shear Spinning[J]. Journal of Mechanical Engineering, 2018, 54(14):66-73.
[9] SONG S H, CHOI W C. FEM Investigation on Thermal Effects on Force in High-speed Blanking of Mild Steel[J]. International Journal of Precision Engineering and Manufacturing, 2016, 17(5):631-635.
[10] 臧勇,穆磊,吴迪平,等.金属薄板滚压冲裁过程数值模拟及模具参数[J]. 北京科技大学学报,2013, 35(10):1360-1367. ZHANG Yong, MU Lei, WU Diping, et al. Numerical Simulation of Metal Sheet Rotary Blanking and Die Parameters[J]. Journal of University of Science and Technology Beijing, 2013, 35(10):1360-1367.
[11] 何冠中,楼铭,马运五,等.铝钢电阻单元焊冲裁过程建模[J]. 中国机械工程,2018,29(7):864-869,881. HE Guangzhong, LOU Ming, MA Yunwu, et al. Modeling of Punching Processes of Resistance Element Welding of Aluminums and Steels[J]. China Mechanical Engineering, 2018, 29(7):864-869,881.
[12] 郭鹏程,叶拓,曹淑芬,等.高应变速率下铸态AM80镁合金的变形行为及数值模拟[J]. 中国机械工程, 2017,28(6):739-743. GUO Pengcheng, YE Tuo, CAO Shufen, et al. Deformation Behavior and Numerical Simulation of a Casting AM80 Magnesium Alloy under High Strain Rate Loading[J]. China Mechanical Engineering, 2017, 28(6):739-743.
[13] STORCHAK M, RUPP P, MÖHRING H C, et al. Determination of Johnson-Cook Constitutive Parameters for Cutting Simulations[J]. Metals, 2019, 9(4):473-489.
[14] Johnson G R, Cook W H. Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures[J]. Engineering Fracture Mechanics, 1985, 21(1):31-48.
[15] LEE S, BARTHELAT F, HUTCHINSON J W, et al. Dynamic Failure of Metallic Pyramidal Truss Core Materials-Experiments and Modeling[J]. International Journal of Plasticity, 2006, 22(11):2118-2145.
[16] LAAKSO S V A, AGMELL M, STåHL J-E. The Mystery of Missing Feed Force-The Effect of Friction Models, Flank Wear and Ploughing on Feed Force in Metal Cutting Simulations[J]. Journal of Manufacturing Processes, 2018, 33:268-277.
[17] HUBERT C, DUBAR L, DUBAR M, et al. Finite Element Simulation of the Edge-trimming/Cold Rolling Sequence:Analysis of Edge Cracking[J]. Journal of Materials Processing Technology, 2012, 212(5):1049-1060.
[18] 路家斌, 潘嘉强, 阎秋生.不锈钢薄板圆盘剪分切过程有限元仿真研究[J]. 机械工程学报, 2013, 49(9):190-198. LU Jiabin, PAN Jiaqiang, YAN Qiusheng. Finite Element Simulation of Stainless Steel Sheet Metal Disc Slitting Process[J]. Journal of Mechanical Engineering, 2013, 49(9):190-198.