To study the fabrication processes of micro-texture for the elliptical vibration assisted turning technique and the characteristics of machined micro-surfaces, the change rules of surface micro-texture was analyzed with vibration principle of ellipse and the micro-texture formation under different speeds and feed rates. The vibration track, surface topography, single micro-texture geometry size and surface roughness were analyzed under the elliptic vibration track measurement tests and elliptic vibration turning tests. The analysis results show that in the turning test processes, compared to the common turning, due to the space elliptic movement of the tool, the surface of ultrasonic elliptical vibration turning presents micro-texture grooves similar to ellipse. With the changes of rotation speed and feed rate, it indicates that the geometric size, profile height and surface roughness of micro-texture grooves will change regularly based on the theoretical analyses and experimental results.
YUAN Lusheng
,
ZHAO Bo
,
WANG Yi
,
ZHAO Chongyang
. Surface Micro-texture Characteristics of 7075 Aluminum Alloys by Elliptical Vibration Assisted Turning[J]. China Mechanical Engineering, 2020
, 31(15)
: 1831
-1838
.
DOI: 10.3969/j.issn.1004-132X.2020.15.010
[1] 唐军,赵波.超声波椭圆振动加工技术的研究进展[J].金刚石与磨料磨具工程, 2014, 34(1):70-78. TANG Jun, ZHAO Bo. Developments of Ultrasonic Elliptical Vibration Machining[J]. Diamond&Abrasives Engineering, 2014, 34(1):70-78.
[2] 李勋,张德远.超声椭圆振动切削表面形貌形成机理的研究[J].中国机械工程, 2009, 20(7):807-811. LI Xun, ZHANG Deyuan. Research on Micro-surface Formation Mechanism of Ultrasonic Elliptical Vibration Cutting[J]. China Mechanical Engineering, 2009, 20(7):807-811.
[3] 王桂林,李文,段梦兰,等.超声椭圆振动车削的切削特性[J].中国机械工程, 2010,21(4):415-419. WANG Guilin, LI Wen, DUAN Menglan, et al. Study on the Characteristics of Ultrasonic Elliptical Vibration Turning[J]. China Mechanical Engineering,2010,21(4):415-419.
[4] 马春翔,社本英二,森肋俊道.超声波椭圆振动切削提高加工系统稳定性的研究[J].兵工学报, 2004, 25(6):752-756. MA Chunxiang, SHAMOTO E, MORIWAKI T. A Study on the Improvement of Machining System of Stability by Applying Ultrasonic Elliptical Vibration Cutting[J]. Acta Armamentarii, 2004, 25(6):752-756.
[5] ZHANG J,SUZUKI N,WANG Y,et al. Ultra-precision Nano-structure Fabrication by Amplitude Control Sculpturing Method in Elliptical Vibration Cutting[J]. Precision Engineering,2015,39:86-99.
[6] NATH C, RAHMAN M. Effect of Machining Parameters in Ultrasonic Vibration Cutting[J]. International Journal of Machine Tools and Manufacture, 2008, 48(9):965-974.
[7] ZOU L, HUANG Y, ZHOU M, et al. Investigation on Diamond Tool Wear in Ultrasonic Vibration-assisted Turning Die Steels[J]. Materials and Manufacturing Processes, 2017,32(13):1505-1511.
[8] NATH C, RAHMAN M, NEO K S. A Study on Ultrasonic Elliptical Vibration Cutting of Tungsten Carbide[J]. Journal of Materials Processing Technology, 2009, 209(9):4459-4464.
[9] KURNIAWAN R, KISWANTO G, KO T J. Surface Roughness of Two-frequency Elliptical Vibration Texturing (TFEVT) Method for Micro-dimple Pattern Process[J]. International Journal of Machine Tools and Manufacture, 2017, 116:77-95.
[10] 程雪利,赵波,刘传绍,等.超声振动切削SiCp/Al复合材料的刀具磨损试验[J].工具技术, 2007, 41(4):18-20. CHENG Xueli, ZHAO Bo, LIU Chuanshao, et al. Experiment of Tool Wear When Ultrasonic Vibration Cutting SiCp/Al Composites[J]. Tool Engineering, 2007, 41(4):18-20.
[11] 吴得宝,刘宪福,孟翔宇,等. 6061铝合金径向超声振动车削的表面完整性研究[J].工具技术, 2019, 53(4):18-22. WU Debao, LIU Xianfu, MENG Xiangyu, et al. Study on Surface Integrity of 6061 Aluminum Alloy by Radial Ultrasonic Vibration Turning[J].Tool Engineering 2019,53(4):18-22.
[12] JUNG H, HAYASAKA T, SHAMOTO E. Study on Process Monitoring of Elliptical Vibration Cutting by Utilizing Internal Data in Ultrasonic Elliptical Vibration Device[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2018, 5(5):571-581.
[13] LI Zhanjie, JIN Gang, FANG Fengzhou, et al. Ultrasonically Assisted Single Point Diamond Turning of Optical Mold of Tungsten Carbide[J]. Micromachines, 2018, 9(2):77.
[14] LU H, LEE D, KIM J, et al. Modeling and Machining Evaluation of Microstructure Fabrication by Fast Tool Servo-based Diamond Machining[J]. Precision Engineering, 2014, 38(1):212-216.
[15] HUANG W, YU D, ZHANG X, et al. Ductile-regime Machining Model for Ultrasonic Elliptical Vibration Cutting of Brittle Materials[J]. Journal of Manufacturing Processes, 2018, 36:68-76.
[16] KURNIAWAN R, KISWANTO G, KO T J. Micro-dimple Pattern Process and Orthogonal Cutting Force Analysis of Elliptical Vibration Texturing[J]. International Journal of Machine Tools and Manufacture, 2016, 106(7):127-140.
[17] 曹腾,路冬,舒嵘,等.基于超声椭圆振动辅助车削的铝合金表面微织构仿真[J].陕西师范大学学报(自然科学版), 2018, 46(4):50-57. CAO Teng, LU Dong, SHU Rong, et al. Simulation on Surface Micro Texture of Aluminium Alloy Based on Ultrasonic Elliptical Vibration Cutting[J]. Journal of Shaanxi Normal University (Natural Science Edition), 2018, 46(4):50-57.