The formation mechanism of electrode shape wear was studied based on the characteristics of micro-EDM technology, where the experimental method of open-state micro-EDM was designed to change the concentration of debris. Through experiments, the influence laws of electrode shape wear under different debris concentrations were systemically investigated by comparing the changes of electrode shape wear, the surface micromorphology and the recast layers of workpieces in micro-EDM under different machining conditions. The influence mechanism of the shape wear of the microelectrodes was analyzed and the intrinsic relationship between the shape change of the craters and the debris was summarized. The results provide an experimental and theoretical basis for the shape control of microelectrodes and achieve the goal of improving the quality and stability of micro-EDM.
LI Xiaopeng
,
WANG Yuangang
,
LIU Yu
,
WANG Hui
,
ZHAO Fuling
. Experimental Study on Effects of Debris on Electrode Shape Wear in Micro-EDM[J]. China Mechanical Engineering, 2020
, 31(15)
: 1815
-1822,1889
.
DOI: 10.3969/j.issn.1004-132X.2020.15.008
[1] MASUZAWA T. State of the Art of Micromachining[J]. CIRP Annals, 2000, 49(2):473-488.
[2] KANG X M, LIANG W, YANG Y X, et al. Maximum Free Distance Method for Electrode Feeding Path Planning in EDM Machining of Integral Shrouded Blisks[J]. Precision Engineering, 2018, 51:514-520.
[3] LI G D, NATSU W, YU Z Y. Study on Debris Behavior and Its Influence on EDM Characteristics in Deep Micro-hole Machining[C]//19th CIRP Conference on Electro Physical and Chemical Machining. Bilbav, 2018:578-581.
[4] PHAM D T, IVANOV A, BIGOT S, et al. An Investigation of Tube and Rod Electrode Wear in Micro Edm Drilling[J]. International Journal of Advanced Manufacturing Technology, 2007, 33(1/2):103-109.
[5] WANG Y Q, CAO M R, YANG S Q, et al. Numerical Simulation of Liquid-solid Two-phase Flow Field in Discharge Gap of High-speed Small Hole Edm Drilling[J]. Advanced Materials Research, 2008, 53/54:409-414.
[6] EKMEKCI B, SAYAR A. Debris and Consequences in Micro Electric Discharge Machining of Micro-holes[J]. International Journal of Machine Tools & Manufacture, 2013, 65:58-67.
[7] ZHANG S, ZHANG W, LIU Y, et al. Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy[J]. Advances in Materials Science and Engineering, 2017, 2017:1-1.
[8] LIU Y, CHANG H, ZHANG W, et al. A Simulation Study of Debris Removal Process in Ultrasonic Vibration Assisted Electrical Discharge Machining (edm) of Deep Holes[J]. Micromachines, 2018, 9(8):1-22.
[9] SUZUKI T, KOBAYASHI S. Mechanisms of Tic Layer Formation on High Speed Steel by a Single Pulse in Electrical Discharge Machining[J]. Electrochimica Acta, 2013, 114:844-850.
[10] KUMAR R, SINGH I. Productivity Improvement of Micro EDM Process by Improvised Tool[J]. Precision Engineering, 2018, 51:529-535.
[11] HSUE A W J, HAB T J, LIN T M. Pulse Efficiency and Gap Status of Rotary Ultrasonic Assisted Electrical Discharge Machining and EDM Milling[C]//19th CIRP Conference on Electro Physical and Chemical Machining. Bilbao, 2018:783-788.
[12] 储召良, 赵万生, 顾琳. 抬刀运动对电火花加工电蚀产物浓度的影响[J]. 机械工程学报, 2013, 49(11):185-192. CHU Zhaoliang, ZHAO Wangsheng, GU Lin. Effect of Electrode Jump Motion on Machining Debris Concentration[J]. Journal of Mechanical Engineering, 2013,49(11):185-192.
[13] 朱应宝, 余祖元, 李剑中,等. 电极摇动对微细电火花加工微孔深径比的影响[J]. 航空制造技术, 2017(3):56-61. ZHU Yingbao, YU Zuyuan, LI Jianzhong, et al. Effects of Planetary Movement of Electrode on Aspect Ratio of Micro Hole Drilled by Micro EDM[J]. Aeronautical Manufacturing Technology, 2017(3):56-61.
[14] LE[KG-0.6mm]A[DD(X-4mm]~O F N, PASHBY I R. A Review on the Use of Environmentally-friendly Dielectric Fluids in Electrical Discharge Machining[J]. Journal of Materials Processing Technology, 2004, 149(1):341-346.
[15] LI X P, WANG Y G, LIU Y, et al. Research on Shape Changes in Cylinder Electrodes Incident to Micro-EDM[J]. Advances in Materials Science and Engineering, 2019:8087462.
[16] 李明辉. 电火花加工理论基础[M]. 北京:国防工业出版社, 1989:43-53. LI Minghui. Theoretical Basis of EDM[M]. Beijing:National Defense Industry Press, 1989:43-53.
[17] 王元刚. 混粉电火花加工机理及关键技术研究[D]. 大连:大连理工大学, 2018. WANG Yuangang. Study on Machining Mechanism and Key Technology of Powder Mixed EDM[D]. Dalian:Dalian University of Technology, 2018.
[18] FURUTANI K, SATO H, SUZUKI M. Influence of Electrical Conditions on Performance of Electrical Discharge Machining with Powder Suspended in Working Oil for Titanium Carbide Deposition Process[J]. International Journal of Advanced Manufacturing Technology, 2009, 40(11/12):1093-1101.