In order to understand the effects of diamond coating on the milling performances of carbide micro-milling cutters with diameter of 50 μm, the micro-groove milling experiments of diamond coated and uncoated tools were carried out. Firstly, the D-shaped micro-milling cutter with diameter of 50 μm was prepared by using WEDG. Then, the micro-groove milling process experiments were carried out on pure copper workpieces with diamond coated and uncoated tools; Changes of the surface morphology and roughness of micro-grooves with milling distance were observed by white-light interferometer and ultra-depth-of-field microscope, and the effects of diamond coating on the milling processes of cemented carbide micro-milling cutters were analyzed. The results show that the micro-groove processed with diamond coating tools has less burr, the surface roughness value is twice lower than that milled with uncoated tools, and stable groove width, roughness value and side morphology may maintain within a certain distance.
ZHANG Yongbin
,
YAN Guanghe
,
LI Jianyuan
,
JIANG Chen
. Milling Process Tests of Diamond Coated Micro-milling Cutters[J]. China Mechanical Engineering, 2020
, 31(15)
: 1772
-1777
.
DOI: 10.3969/j.issn.1004-132X.2020.15.002
[1] DORNFELD D, MIM S, TAKEUCHI Y. Recent Advances in Mechanical Micromachining[C]. CIRP Annals, 2006, 55(2), 745-768.
[2] 于同敏, 宫德海. 微型模具制造技术研究与发展[J]. 中国机械工程, 2005, 16(2):179-183. YU Tongmin, GONG Dehai. Research and Development of Micro-mold Manufacture Technology[J]. China Mechanical Engineering, 2005, 16(2):179-183.
[3] 李红涛, 来新民, 李成峰, 等. 介观尺度微型铣床开发及性能试验[J]. 机械工程学报, 2006, 42(11):162-167. LI Hongtao, LAI Xinmin, LI Chengfeng, et al. Development of Meso-scale Milling Machine Tool and Performance Analysis[J]. Chinese Journal of Mechanical Engineering, 2006, 42(11):162-167.
[4] 陈明君, 陈妮, 何宁, 等. 微铣削加工机理研究新进展[J]. 机械工程学报, 2014, 50(5):161-172. CHEN Mingjun, CHEN Ni, HE Ning, et al. The Research Progress of Micro-milling in Machining Mechanism[J]. Chinese Journal of Mechanical Engineering, 2014, 50(5):161-172.
[5] RAHMAN M, KUMAR A S, PRAKASH J R. Micro Milling of Pure Copper[J]. Journal of Materials Processing Technology, 2001, 116(1):39-43.
[6] UCUN I, AALANTAS K, BEDIR F. An Experimental Investigation of the Effect of Coating Material on Tool Wear in Micro Milling of Inconel 718 Super Alloy[J]. Wear, 2013, 300(1/2):8-19.
[7] UCUN I, ASLANTAS K, BEDIR F. The Effect of Minimum Quantity Lubrication and Cryogenic Pre-cooling on Cutting Performance in the Micro Milling of Inconel 718[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2014, 229(12):2134-2143.
[8] BISSACCO G, HANSEN H N, SLUNSKY J. Modelling the Cutting Edge Radius Size Effect for Force Prediction in Micro Milling[J]. CIRP Annals, 2008, 57(1):113-116.
[9] ARAMCHAROEN A, MATIVENGA P T, YANG S, et al. Evaluation and Selection of Hard Coatings for Micro Milling of Hardened Tool Steel[J]. International Journal of Machine Tools and Manufacture, 2008, 48(14):1578-1584.
[10] ASLANTAS K, HOPA H E, PERCIN M. Cutting Performance of Nano-crystalline Diamond (NCD) Coating in Micro-milling of Ti6Al4V Alloy[J]. Precision Engineering, 2016, 45:55-66.
[11] LU X, JIA Z, WANG H. Tool Wear Appearance and Failure Mechanism of Coated Darbide Tools in Micro-milling of Inconel 718 Super Alloy[J]. Industrial Lubrication and Tribology, 2016, 68(2):267-277.
[12] THEPSONTHI T, ÖZEL T. Experimental and Finite Element Simulation Based Investigations on Micro-milling Ti-6Al-4V Titanium Alloy:Effects of cBN Coating on Tool Wear[J]. Journal of Materials Processing Technology, 2013, 213(4):532-542.
[13] UHLMANN E, SCHAUERK. Dynamic Load and Strain Analysis for the Optimization of Micro End Mills[J]. CIRP Annals, 2005, 54(1):75-78.
[14] FLEISCHER J, DEUCHERT M, RUHS C, KVHLEWEIN C, et al. Design and Manufacturing of Micro Milling Tools[J]. Microsystem Technologies, 2008, 14(9/11):1771-1775.
[15] 杨正杰, 张勇斌,徐凌羿. 微铣刀制备技术与实验研究[J]. 电加工与磨具, 2016(3):56-61. YANG Zhengjie, ZHANG Yongbin, XU Lingyi. Experimental Study on Manufacturing Technology of Micro Milling Tools[J]. Electrical Machining and Abrasive Tools, 2016(3):56-61.