In order to improve the starting performance of the vehicles, clutch and torque converter were usually used as starting devices for the new generation of high power CVT. The multi-objective characteristics of the cluth engagement process will cause problems such as vehicle starting shock. Therefore, the optimal control of drive-neutral-reverse(DNR) clutch engagement processes was studied. Firstly, a clutch pressure control system was designed so that the system had further optimization space. Then, the clutch engagement processes were analyzed to determine the starting evaluation index. Thirdly, the model predictive control strategy was proposed to achieve the consistency of clutch engagements. Finally, CVT powertrain simulation model was established by joint simulation and verified the system effectiveness by Lifan 520 auto for real vehicle tests. The results indicate that with the effects of the optimal control strategy, the clutch engagement processes may complete the oil filling processes at the target time, reduce the starting impacts and effectively improve the starting quality of the vehicles.
HAN Ling
,
LIU Hongxiang
,
CAO Yue
,
REN Leilei
. Model Predictive Control-based Starting Control Optimization Strategy for CVTs[J]. China Mechanical Engineering, 2020
, 31(15)
: 1765
-1771
.
DOI: 10.3969/j.issn.1004-132X.2020.15.001
[1] 高帅. 无级变速器电液控制系统开发及关键技术研究[D]. 长春:吉林大学,2012. GAO Shuai. Development of the Electric-hydraulic System for Continuously Variable Transmission and Research on the Key Technology[D]. Changchun:Jilin University, 2012.
[2] HU X,MARTINEZ C M, EGARDT B, et al. Multi-objective Optimal Sizing and Control of Fuel Cell Systems for Hybrid Vehicle Applications[C]//Europena Control Conference. Linz, 2015:2559-2564.
[3] KUM D. Control of Engine-starts for Optimal Drivability of Parallel Hybrid Electric Vehicles[J]. Journal of Dynamic Systems Measurement & Control, 2013, 135(2):450-472.
[4] CHEN K, ZHAO F, LIU Z, et al. Fuel Economy Regulations and Technology Roadmaps of China and the US:Comparison and Outlook[C]//International Powertrains, Fuels & Lubricants Meeting. SAE Technical Paper, 2018-01-1826.
[5] 张涛,陶刚,陈慧岩. 电控自动变速器升挡转矩相控制策略[J]. 汽车工程,2013,35(2):173-178. ZHANG Tao, TAO Gang, CHEN Huiyan.Control Strategy for the Torque Phase in Up-shift Process of an Electrically-controlled Automatic Transmission[J]. Automotive Engineering, 2013,35(2):173-178.
[6] 孙冬野,张学锋,张磊. 基于目标油门开度预估的AMT汽车起步控制[J]. 内燃机,2012(4):19-22. SUN Dongye, ZHANG Xuefeng, ZHANG Lei. AMT Automobile Starting Control Based on Opening Prediction Target Accelerograph[J].Internal Combustion Engines, 2012(4):19-22.
[7] DOLCINI P, WIT C C D, BECHART H. Lurch Avoidance Strategy and Its Implementation in AMT vehicles[J]. Mechatronics, 2008, 18(5):289-300.
[8] 雷雨龙,葛安林,李永军. 离合器起步过程的控制策略[J]. 汽车工程,2000,22(4):266-269. LEI Yulong, GE Anlin, LI Yongjun. Clutch Control Strategy in Starting Process[J]. Automotive Engineering, 2000, 22(4):266-269.
[9] GU Y, YIN C, ZHANG J. Optimal Torque Control Strategy for Parallel Hybrid Electric Vehicle with Automatic Mechanical Transmission[J]. Chinese Journal of Mechanical Engineering, 2007, 20(1):16-20.
[10] 孙静. 混合动力电动汽车驱动系统优化控制策略研究[D]. 济南:山东大学,2015. SUN Jing. Research on Optimal Control Strategy for Hybrid Electric Vehicle Driving System[D]. Jinan:Shandong University, 2015.
[11] MONTANARI M, RONCHI F, ROSSI C, et al. Control and Performance Evaluation of a Clutch Servo System with Hydraulic Actuation[J]. Control Engineering Practice, 2004, 12(11):1369-1379.
[12] PAHLOVY S, MAHMUD S, KUBOTA M, et al. Multiphase Drag Modeling for Prediction of the Drag Torque Characteristics in Disengaged Wet Clutch[J]. SAE International Journal of Commercial Vehicle, 2014, 7(2):441-447.
[13] 陈海军, 赵治国, 王琪, 等. 干式DCT双离合器联合起步最优协调控制[J]. 机械工程学报, 2014, 22(50):150-164. CHEN Haijun, ZHAO Zhiguo, WANG Qi, et al.Dry Dual Clutch Transmission' Optimal and Coordinating Launching Control with Two Clutches Based on the Minimum Principle[J]. Journal of Mechanical Engineering, 2014, 22(50):150-164.
[14] LEI Y L, GAO B Z, TIAN H, et al. Throttle Control Strategies in the Process of Integrated Powertrain Control[J]. Chinese Journal of Mechanical Engineering, 2005, 18(3):429-433.
[15] 高炳钊, 洪金龙, 陈虹. 汽车传动系统平顺性驾驶品质控制[J]. 控制理论与应用, 2017, 34(7):849-866. GAO Bingzhao, HONG Jinlong, CHEN Hong.Drivability Control of Automotive Drivetrain[J]. Control Theory & Applications, 2017, 34(7):849-866.
[16] WU Guangqiang, SI Jianyu. Launching Intelligent Control Strategy for Dual Clutch Transmission[J]. Journal of Tongji University (Natural Science), 2012, 40(1):81-87.
[17] 陈虹. 模型预测控制[M]. 北京:科学出版社,2013:149-171. CHEN Hong. Model Predictive Control[M]. Beijing:Science Press, 2013:149-171.
[18] 余世明,孙超.插电式混合动力汽车离合器控制方法及仿真研究[J]. 浙江工业大学学报, 2017, 45(3):305-309. YU Shiming, SUN Chao. Clutch Control Method and Model-based Simulation of Plug-in Hybrid Vehicle[J]. Journal of Zhejiang University of Technology, 2017, 45(3):305-309.