In order to reveal the performance characteristics of mechanical elastic wheels, the static and dynamic characteristics of mechanical elastic wheels were studied based on mechanics theory and virtual prototype technology. The static loading characteristics of mechanical elastic wheels were analyzed comparatively under good conditions and with a hinged group damaged conditions. The results show that the maximum tensions of hinged group under damaged condition are quite different from those under intact condition. They are no longer located at the top of the wrestle wheel, and the maximum tension value is much higher than that under intact condition. The mechanics model of the driving wheel, driven wheel and brake wheel were established under dynamic conditions. Also, the wheel hub, hinged group and elastic wheel disk force transmissions were analyzed. Finally, the vehicle model with the elastic wheels was established in ADAMS and the simulation study was carried out. The results verify the natural relation among the rotational hysteresis angles of the mechanical elastic wheels and input torques, speeds and ground tangential forces.
ZHAO Youqun
,
BAI Yiqiang
,
YE Chao
,
DENG Yaoji
,
XU Han
,
WANG Qiuwei
. Study on Static and Dynamic Characteristics of Mechanical Elastic Wheels[J]. China Mechanical Engineering, 2019
, 30(19)
: 2306
-2312
.
DOI: 10.3969/j.issn.1004-132X.2019.19.006
[1] GASMI A,JOSEPH P F. Development of a Two-dimensional Model of a Compliant Non-pneumatic Tire[J]. International Journal of Solids and Structures,2012,49(13):1723-1740.
[2] 佟金,杨欣,张伏,等. 零压续跑轮胎技术现状与发展[J]. 农业机械学报,2007,38(3):182-187. TONG Jin,YANG Xin,ZHANG Fu,et al. Development of Run-flat Tire Technology[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(3):182-187.
[3] LUGNER P,PACEJKA H,PLOCHL M. Recent Advances in Tyre Models and Testing Procedures[J]. Vehicle System Dynamics,2005,43(6/7):413-436.
[4] JANGA I G,SUNGB Y H,YOOC E J,et al. Pattern Design of a Non-pneumatic Tire for Stiffness Using Topology Optimization[J]. Engineering Optimization,2012,44(2):119-131.
[5] BRAS B,COBERT A. Life-cycle Environmental Impact of Michelin TWEEL Tire for Passenger Vehicles[J]. SAE International Journal of Passenger Cars-Mechanical Systems,2011,4(1):32-43.
[6] 李杰,庄继德,魏东. 沙漠仿生轮胎的静态特性和动态特性研究[J]. 农业机械学报,2007,38(9):30-33. LI Jie,ZHUANG Jide,WEI Dong. Static and Dynamic Performancesof Bionic Camel Foot Tire[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(9):30-33.
[7] SUGIYAMA H,SUDA Y. Non-linear Elastic Ring Tyre Model Using the Absolute Nodal Coordinate Formulation[J]. Journal of Multi-body Dynamics,2009,223(3):211-219.
[8] NARASIMHAN A,ZIEGERT J,THOMPSON L. Effects of Material Properties on Static Load-deflection and Vibration of a Non-pneumatic Tire during High-speed Rolling[J]. SAE International Journal of Passenger Cars-Mechanical Systems,2011,4(1):59-72.
[9] ZHAO Y Q,ZANG L G,CHEN Y Q,et al. Non-pneumatic Mechanical Elastic Wheel Natural Dynamic Characteristics and Influencing Factors[J]. Journal of Central South University,2015,22(5):1707-1715.
[10] 管欣,王鹏,詹军,等. 金属弹性车轮的建模与动态仿真研究[J]. 中国机械工程,2007,18(21):2637-2641. GUAN Xin,WANG Peng,ZHAN Jun,et al. Modeling and Dynamic Analysis of a Metal Elastic Wheel[J]. China Mechanical Engineering,2007,18(21):2637-2641.
[11] WEI Wang,ZHAO Youqun,ZANG Liguo. Structure Analysis and Ride Comfort of Vehicle on New Mechanical Elastic Tire[C]//Proceedings of the FISITA 2012 World Automotive Congress,Lecture Notes in Electrical Engineering. Beijing,2013:199-209.
[12] LI Bo,ZHAO Youqun,ZANG Liguo. Closed-form Solution of Curved Beam Model of Elastic Mechanical Wheel[J]. Journal of Vibroengineering,2014,16(8):3951-3962.
[13] WANG Wei, YAN Shan, ZHAO Shugao. Experimental Verification and Finite Element Modeling of Radial Truck Tire under Static Loading[J]. Journal of Reinforced Plastics and Composites,2013,32(7):490-498.
[14] 岳红旭,赵又群. 一种新型安全车轮的非线性有限元分析[J]. 中国机械工程,2012,23(11):1380-1385. YUE Hongxu,ZHAO Youqun. Nonlinear Finite Element Analysis of a New Safety Wheel[J]. China Mechanical Engineering,2012,23(11):1380-1385.
[15] 汪伟,赵又群,姜成,等. 新型机械弹性车轮的力学传递特性分析[J]. 江苏大学学报(自然科学版),2013,34(3):261-266. WANG Wei,ZHAO Youqun,JIANG Cheng,et al. Characteristics Analysis of Mechanical Transmission for a New Mechanical Elastic Wheel[J]. Journal of Jiangsu University(Natural Science Edition),2013,34(3):261-266.