Low Carbon Modeling and Optimization of Milling Parameters Based on Improved Gravity Search Algorithm

  • ZHAN Xinlong ,
  • ZHANG Chaoyong ,
  • MENG Leilei ,
  • HONG Hui
Expand
  • 1. State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, 430074;
    2. School of Computer Science, Liaocheng University, Liaocheng, Shandong, 252059

Received date: 2018-12-19

  Revised date: 2020-05-27

  Online published: 2020-07-18

Abstract

Aiming at the milling characteristics of computer numerical control(CNC) machines,a multi-objective optimization model of milling parameters was established considering cutter life, machined surface quality, cutting speed and milling machine process performance, while using carbon emissions per unit volume, cost of production per unit volume and processing time as objectives in milling processes, and using cutting speed, feed per tooth and cutting width as optimization variables.An INSGSA was proposed to solve the problem.In order to find the distributed evenly solution set and guide the group to the region near Pare to optimal solution set, elitist conversation strategy and fallback operations of position update were adopted by the improved algorithm. In addition, inspired by the crossover operation of genetic algorithm, the elite-elite crossover strategy and elite-non-elite crossover strategy were proposed to increase the diversity of the population. Finally, the superiority and feasibility of INSGSA were proved by comparing the non-dominated sorting gravity search algorithm (NSGSA)and the teaching-learning-based optimization (TLBO). Moreover, gray corelation method was adopted to select the satisfactory solution, which gives a new method in cutting parameter optimization for green manufacturing.

Cite this article

ZHAN Xinlong , ZHANG Chaoyong , MENG Leilei , HONG Hui . Low Carbon Modeling and Optimization of Milling Parameters Based on Improved Gravity Search Algorithm[J]. China Mechanical Engineering, 2020 , 31(12) : 1481 -1491 . DOI: 10.3969/j.issn.1004-132X.2020.12.012

References

[1] MENG Leilei,ZHANG Chaoyong,SHAO Xinyu, et al. Mathematical Modelling and Optimisation of Energy-conscious Hybrid Flow Shop Scheduling Problem with Unrelated Parallel Machines[J]. International Journal of Production Research,2019,57(4):1119-1145.
[2] 孟磊磊,张超勇,肖华军,等. 面向加工时间可控的柔性作业车间节能调度问题建模研究[J]. 计算机集成制造系统,2019,25(5):1062-1074. MENG Leilei, ZHANG Chaoyong, XIAO Huajun,et al. Mathematical Modeling of Energy-efficient Flexible Job Shop Scheduling Problem with Controllable Processing Times[J]. Computer Integrated Manufacturing Systems, 2019,25(5):1062-1074.
[3] ASOKAN P, SARAVANAN R, VIJAYAKUMAR K. Machining Parameters Optimisation for Turning Cylindrical Stock into a Continuous Finished Profile Using Genetic Algorithm (GA) and Simulated Annealing (SA)[J]. International Journal of Advanced Manufacturing Technology,2003,21:1-9.
[4] 刘海江, 黄炜. 基于粒子群算法的数控加工切削参数优化[J]. 同济大学学报(自然科学版), 2008, 36(6):803-806. LIU Haijiang,HUANG Wei. Computer Numerical Control Machining Parameter Optimization Based on Particle Swarm Optimization[J]. Journal of Tongji University (Natural Science), 2008, 36(6):803-806.
[5] YILDIZ A R. Optimization of Multi-pass Turning Operations Using Hybrid Teaching Learning-based Approach[J]. International Journal of Advanced Manufacturing Technology, 2013, 66:1319-1326.
[6] MENG Leilei,ZHANG Chaoyong,SHAO Xinyu, et al. MILP Models for Energy-aware Flexible Job Shop Scheduling Problem[J]. Journal of Cleaner Production,2019,210:710-723.
[7] RAJEMI M F, MATIVENGA P T, ARAMCHAROEN A. Sustainable Machining:Selection of Optimum Turning Conditions Based on Minimum Energy Considerations[J]. Journal of Cleaner Production, 2010, 18(10/11):1059-1065.
[8] 李聪波, 崔龙国, 刘飞,等. 面向高效低碳的数控加工参数多目标优化模型[J]. 机械工程学报, 2013,49(9):87-96. LI Congbo, CUILongguo, LIU Fei,et al. Multi-objective NC Machining Parameters Optimization Model for High Efficiency and Low Carbon[J]. Journal of Mechanical Engineering, 2013,49(9):87-96.
[9] YAN Jihong,LI Lin. Multi-objective Optimization of Milling Parameters:the Trade-offs between Energy, Production Rate and Cutting Quality[J]. Journal of Cleaner Production,2013,52:462-471.
[10] HANAFI I, KHAMLICHI A,CABRERA F M, et al. Optimization of Cutting Conditions for Sustainable Machining of PEEK-CF30 Using TiNTools[J]. Journal of Cleaner Production, 2012, 33:1-9.
[11] LIU C G, YANG J, LIAN J, et al. Sustainable Performance Oriented Operational Decision-making of Single Machine Systems with Deterministic Product Arrival Time[J]. Journal of Cleaner Production, 2014, 85:318-330.
[12] 黄拯滔. 面向低碳制造的数控铣削过程建模与参数优化研究[M].武汉:华中科技大学,2016. HUANG Zhengtao. Research on Modeling and Cutting Parameters Optimization of CNC Milling Process for Low-carbon Manufacturing[M]. Wuhan:Huazhong University of Science and Technology, 2016.
[13] 李聪波,崔龙国,刘飞,等. 基于广义边界的机械加工系统碳排放量化方法[J].计算机集成制造系统,2013,19(9):2229-2236. LI Congbo, CUI Longguo, LIU Fei,et al. Carbon Emissions Quantitative Method of Machining System Based on Generalized Boundary[J].Computer Integrated Manufacturing Systems, 2013,19(9):2229-2236.
[14] RASHEDI E, NEZAMABADI-POUR H, SARYAZDI S. GSA:a Gravitational Search Algorithm[J]. Information Sciences,2009,179(13):2232-2248.
[15] 刘勇,马良.非线性极大极小问题的混沌万有引力搜索算法求解[J].计算机应用研究,2012,29(1):47-48. LIU Yong, MA Liang. Solving Nonlinear Minimax Problems Based on Chaos Gravitational Search Algorithm[J]. Application Research of Computers, 2012, 29(1):47-48.
[16] NOBAHARI H, NIKUSOKHAN M, SIARRY P. A Multi-objective Gravitational Search Algorithm Based on Non-dominated Sorting[J]. International Journal of Swarm Intelligence Research (IJSIR), 2012, 3(3):32-49.
[17] SÖNMEZA I, BAYKASOĞLU A, DERELI T, et al. Dynamic Optimization of Multi-pass Milling Operations via Geometric Programming[J]. International Journal of Machine Tools and Manufacture, 1999, 39(2):297-320.
[18] ZOU F, WANG L, HEI X, et al. Multi-objective Optimization Using Teaching-learning-based Optimization Algorithm[J]. Engineering Applications of Artificial Intelligence, 2013, 26(4):1291-1300.
Outlines

/

〈 〉